9091 & 9092 MINIATURE SIP RELAYS 9091 & 9092 Series Miniature Molded SIP Reed Relays The 9091 is a compact version of the 9001 using 40% less board space (LxW). Because of its increased height, the 9092 model allows for incorporation of 2 Form A switches in the same board space. These miniature SIP relays utilize 10W switch technology, making these SIP relays ideal for use in ATE applications and other high reliability test, measurement and telecommunications applications where high board density and long life are key requirements. 9091 & 9092 Series Features u 9091 is a 10W SIP relay measuring .615” x .150” x .275” u 9092 is a 10W SIP relay measuring .600” x .150” x .350” u Magnetic shield – reduces interaction u Optional coil suppression diode protects coil drive circuits u UL File #E67117 - Contact factory for details u High insulation resistance, 1012Ω minimum u High speed switching u Molded thermoset body on integral lead frame design u High reliability, hermetically sealed contacts for long life u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 9091 Model 9092 IDENTIFIES PIN # 1 .615 Max. (15.62) .020 (0.5) .020 Ref.. (0.51) 1 2 3 .150 Max (3.81) 4 .125 (3.18) .150 Typ. (3.81) .150 Max (3.81) .600 Typ. (15.24) .020 Typ . (.51) .275 Max (6.98) .010 (0.25) .020 Ref. (.508) 1 2 3 4 .125 ± .005 (3.18 ± .831) 5 6 1 .350 Max (8.89) .010 Typ. (0.25) .10 (2.54) .50 (12.7) .140 (3.56) Ordering Information Part Number 90XX-XX-XX Model Number General Options 0=No Diode 9091 9092 1=Diode Coil Voltage 05=5 volts 12=12 volts Magnetic Shield (9091 only) 0=No Shield 1=Mag Shield (9091 Internal, 9092 External) 04082014 tel: (401) 943.2686 | fax: (401) 942.0920 MODEL NUMBER Parameters Test Conditions 90912,3 90922,3 Units (10 Watt) 1 Form A SIP (10 Watt) 2 Form A SIP VDC 5 12 5 12 COIL SPECS. Nom. Coil Voltage Max. Coil Voltage VDC 6.5 15.0 6.5 15.0 +/- 10%, 25° C Ω 500 1000 375 750 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 Max DC/Peak AC Resist. Volts 200 200 Coil Resistance CONTACT RATINGS Switching Voltage Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5 Max DC/Peak AC Resist. Watts 10 10 Contact Rating Signal Level 1.0V, 10mA x 10 Ops. 500 500 Static Contact Resistance (max. init.) 50mV, 10mA Ω 0.125 0.150 Dynamic Contact Resistance (max. init.) 0.5V, 50mA at 100 Hz, 1.5 msec Ω 0.150 0.200 Between all Isolated Pins at 100V, 25°C, 40% RH Ω 1012 1012 Life Expectancy-Typical 1 6 RELAY SPECIFICATIONS Insulation Resistance (minimum) Capacitance - Typical Across Open Contacts pF 0.7 1.0 Open Contact to Coil pF 2.0 1.4 Between Contacts Contacts to Coil VDC/peak AC VDC/peak AC 200 1500 200 1500 At Nominal Coil Voltage, 30 Hz Square Wave msec. 0.5 0.75 msec. 0.30 0.5 Dielectric Strength (minimum) Operate Time - including bounce - Typical Release Time - Typical Top View: Dot stamped on relay refers to pin #1 Grid = .1”x.1” (2.54mm x 2.54mm) 1 2 3 4 1 2 3 4 5 6 Notes: Consult factory for life expectancy at other switching loads. End of life is defined as Resistance >0.5Ω, or failure to open. Optional diode is connected to pin #2(+) and pin #3(-) for 9091; pin #3(+) and pin #4(-) for 9092. Correct coil polarity must be observed. 3 9091 internal mag shield. 9092 external mag shield. 1 2 Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C; Solder Temp: 270°C max; 10 sec. max All electrical parameters measured at 25°C unless otherwise specified. Vibration: 20 G’s to 2000 Hz; Shock: 50 G’s 04082014 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.