TECHNICAL DATA SHEET SFTW-203 Base material Polyolefin Color Standard and special colors Typical Properties Physical Value Shrink ratio 3:1 Tensile strength 18 N/mm2 min. - IEC 60684-2-19 Elongation at break 400 % min. - IEC 60684-2-19 Longitudinal change +0/ -5 % - IEC 60684-2-9 Concentricity 70 % min. - IEC 60684-2-3 Secant Modulus 100 N/mm2 min. - IEC 60684-2-37 Relative Density 1.29 g/cm³ - IEC 60684-2-4 - IEC 60684-2-37 - IEC 60684-2-6 Thermal Value Continuous Operating Temperature -55°C to +135°C Shrink Temperature 110°C min. 280 °C max. Standard Test Method Standard Heat Shock 200 oC / 4 hrs Test Method Tensile strength 18 N/mm2 min. - IEC 60684-2-19 Elongation at break 400 % min. - IEC 60684-2-19 - IEC 60684-2-39 350 % min. - IEC 60684-2-19 Low Temperature Flexibility No cracking after bending - IEC 60684-2-14 Copper Corrosion No corrosion - IEC 60684-2-33 Flammability Self extinguishing - IEC 60684-2-26 Heat Aging 150 oC / 168 hrs Elongation at break Electrical Value Dielectric Strength 300 kV/cm - IEC 60684-2-21 Volume resistivity 1*10 15 Ohm/cm - IEC 60684-2-23 - IEC 60684-2-36 Chemical Value Chemical Resistance Good Standard Test Method Standard Test Method Environmental Value Standard Test Method Halogen free No BS 6853 N/a Fungus growth No ingrowth RoHS compliant Yes 2002/95/EEC Incl. Exemption Oct. 13, 2005 EU 2005/717/EC N/a Decabromo diphenylether (PBDE) Free No ISO 846 N/a Technical Information provided consists of typical product data and should not be used for specification purposes. Unless otherwise specified in the test method, all tests are performed at room temperature. Important note to the purchaser. All statements, technical information and recommendations contained herein are based on tests 3M believes to be reliable, but their accuracy and completeness are not guaranteed. The user shall be responsible for determining the suitability of the products for his particular application. To discuss your application requirements please contact your representative BDB2033 8801 10/01 Issue date 13/9/2005 Replacing 1/8/2004 Page 1 of 2 TECHNICAL DATA SHEET SFTW-203 Documentation o UL-224 125 C 600 V, File E48398 Bundesamt für Wehrtehnik und Beschaffung (BWB) certificate K16/99085 VDE certificate 94972 SAE-AMS-DTL 23053/5 class 1 IEC 60684-3-212 type C Product Guide - Table 1 Part Number Expanded ID (min.) mm. Recovered ID (max.) mm. Total Recovered Wall Thickness (nominal) mm. 1.5 1.5 0.5 0.45 3.0 3.0 1.0 0.55 6.0 6.0 2.0 0.65 9.0 9.0 3.0 0.75 12.0 12.0 4.0 0.75 18.0 18.0 6.0 0.75 24.0 24.0 8.0 1.00 39.0 39.0 13.0 1.15 Recovered Adhesive Wall Thickness (nominal) mm. Storage Conditions Temperature: min. -50 oC max. +50 oC Moisture: max. 75 % (packaging) Important note to the purchaser. All statements, technical information and recommendations contained herein are based on tests 3M believes to be reliable, but their accuracy and completeness are not guaranteed. The user shall be responsible for determining the suitability of the products for his particular application. To discuss your application requirements please contact your representative BDB2033 8801 10/01 Issue date 13/9/2005 Replacing 1/8/2004 Page 2 of 2