Surface Acoustic Wave Filter (SAW Filter) TQS-444F-7R Application Features IF filter for Wireless LAN Miniature size : 5.2(W) x 4.5(D) x 1.55(H)mm High selectivity Specifications Type TQS-444F-7R Nominal frequency [fo] 280 MHz fo ±8.5 MHz min. Pass band Insertion loss 10.0 dB max. Stop band attenuation fo ±38.8 MHz 50 dB min. 270 Ω // -5pF Terminating impedance -10 °C to +50 °C Operating temperature range Package Outlines [Dimensions in mm] Footprint [Dimensions in mm] 1.55±0.15 6.0 0.8±0.2 (G) 1.4 (G) (G) (I/0) (I/0) (G) (G) 0.8 1.0±0.2 1.27 1.27 1.27±0.15 Marking 2.54 4.5±0.2 1.27±0.15 5.2±0.2 (G) (2001. 3.) Surface Acoustic Wave Filter (SAW Filter) TQS-444F-7R IF Filter for Wireless LAN system 280 MHz Electrical Data 0 0 A 1 20 2 30 3 B 40 4 50 5 60 6 70 7 80 8 90 9 100 A: –100 B: –12.5 280 B: LOSS (dB) A: LOSS (dB) 10 10 +100 +12.5 FREQUENCY (MHz) (2001. 3.) Surface Acoustic Wave Filter (SAW Filter) TQS-450A-7R Application Features IF filter for Wireless LAN Miniature size : 5.2(W) x 4.5(D) x 1.55(H)mm High selectivity Specifications Type TQS-450A-7R Nominal frequency [fo] 280 MHz fo ±17 MHz min. 5dB Pass band Insertion loss 8.5 dB max. Group delay distortion 100 ns max. Stop band attenuation 33 dB min. 33 dB min. fo -45 MHz fo +45 MHz 480 Ω // -3.5pF Terminating impedance -10 °C to +50 °C Operating temperature range Package Outlines [Dimensions in mm] Footprint [Dimensions in mm] 1.55±0.15 6.0 0.8±0.2 (G) 1.4 (G) (G) (I/0) (I/0) (G) (G) 0.8 1.0±0.2 1.27 1.27 1.27±0.15 Marking 2.54 4.5±0.2 1.27±0.15 5.2±0.2 (G) (2000.12.) Surface Acoustic Wave Filter (SAW Filter) TQS-450A-7R IF Filter for Wireless LAN system 280 MHz Electrical Data -10 0 10 A: LOSS (dB) 20 30 40 50 60 70 80 90 –250 +250 280 FREQUENCY (MHz) 300 A A: LOSS (dB) 7 280 8 260 9 24 10 220 11 200 12 B 180 13 160 14 140 15 120 16 –25 280 B: Group Delay Time (ns) 6 100 +25 FREQUENCY (MHz) (2000.12.) Surface Acoustic Wave Filter (SAW Filter) TQS-453C-7R Application Features ETC system Miniature size : 5.2(W) x 4.5(D) x 1.55(H)mm High selectivity Specifications Type TQS-453C-7R Nominal frequency [fo] 40 MHz fo ±2.5 MHz min. Pass band Insertion loss 13.0 dB max. Stop band attenuation fo ±10 MHz 35 dB min. 840 Ω // -7.7pF Terminating impedance -25 °C to +90 °C Operating temperature range 1.55 ±0.15 Marking 6.0 (G) (G) (G) (I/O) (G) (G) 1.5 ±0.2 (I/O) 0.8 ±0.2 (G) 0.8 1.4 0.8 2.0 1.9 5.3 1.0 ±0.2 1.27 1.27 1.4 1.27 ±0.15 4.5 ±0.2 5.2 ±0.2 Footprint [Dimensions in mm] 1.27 ±0.15 Package Outlines [Dimensions in mm] Surface Acoustic Wave Filter (SAW Filter) TQS-453C-7R IF Filter for ETC system 40 MHz Electrical Data 0 5 10 7 20 9 30 11 40 B 13 50 15 60 17 70 19 80 21 90 23 100 A: –25 B: –10 25 40 FREQUENCY (MHz) +25 +10 B:LOSS (dB) A:LOSS (dB) A Surface Acoustic Wave Filter (SAW Filter) TQS-457A-7R Application Features IF filter for Wireless LAN Miniature size : 5.2(W) x 4.5(D) x 1.55(H)mm High selectivity Specifications Type TQS-457A-7R Nominal frequency [fo] 374 MHz fo ±8.5 MHz min. Pass band Insertion loss 12.0 dB max. Pass band ripple 1.5 dB max. Group delay distortion 100 ns max. Stop band attenuation fo ± (16.5 to 22) MHz fo ± (22 to 33) MHz fo ± (33 to 100) MHz 30 dB min. 33 dB min. 38 dB min. Input (Balanced or unbalanced) : 160 Ω // -8 pF Output (Balanced or unbalanced) : 50 Ω // -15 pF Terminating impedance Operating temperature range -40 °C to +85 °C 1.55 ±0.15 Marking 6.0 1.4 0.8 1.9 Output Input Ground(Input) 2.0 5.3 (G) 1.5 ±0.2 1.0 ±0.2 1.27 1.27 1.4 1.27 ±0.15 4.5 ±0.2 5.2 ±0.2 Footprint [Dimensions in mm] 1.27 ±0.15 Package Outlines [Dimensions in mm] 0.8 (G) (G) Output Ground(Output) 0.8 ±0.2 Input (G) (2001. 5.) Surface Acoustic Wave Filter (SAW Filter) TQS-457A-7R IF Filter for Wireless LAN system 374 MHz Electrical Data -20 10 -10 11 0 12 A 13 B 20 14 30 15 40 16 50 17 60 18 70 19 80 A:–100 B: –25 374 B: LOSS (dB) A: LOSS (dB) 10 20 +100 +25 FREQUENCY (MHz) (2001. 5.) Surface Acoustic Wave Filter (SAW Filter) TQS-458B-7R Application Features IF filter for Cellular Phone CDMA system Miniature size : 11.4(W) x 5.0(D) x 1.40(H)mm Low group delay distortion High selectivity Specifications Type TQS-458B-7R Nominal frequency (fo) 85.38 MHz fo ±600 kHz min. 5dB Pass band (relative to loss at fo) Insertion loss 10.5 dB max. Amplitude ripple 1.0 dB max. (fo ±0.3 MHz) Group delay distortion 400 ns max. (fo ±0.3 MHz) Stop band attenuation (relative to loss at fo) fo ± 0.9 MHz fo ± 1.7 MHz fo ± 9 MHz to ± 50 MHz 33 dB min. 33 dB min. 45 dB min. Input (Balanced or Unbalanced) : 1.8 kΩ // -10pF Output (Balanced or Unbalanced) : 1.5 kΩ // -9pF Terminating impedance -30 °C to +80 °C Operating temperature range Package Outlines [Dimensions in mm] 1.40 ±0.2 2.54 ±0.15 11.4 ±0.2 5.0 ±0.2 Footprint [Dimensions in mm] 2.54 2.54 (G) or (I/0) 2.6 (G) (G) (G) 1.6 (I/0) 0.8 ±0.2 (I/0) (G) 12.2 (G) or (I/0) (G) 1 ±0.2 (G) 1.2 2.54±0.15 2.4 1.8 ±0.2 2.54 Marking (2001. 1.) Surface Acoustic Wave Filter (SAW Filter) TQS-458B-7R IF Filter for Cellular Phone CDMA system 85.38 MHz Electrical Data -10 8 0 9 10 10 A : LOSS (dB) 20 11 30 12 40 13 50 14 B 60 15 70 16 80 17 90 -2.5 85.38 B : LOSS (dB) A 18 +2.5 FREQUENCY (MHz) (2001. 1.) Surface Acoustic Wave Filter (SAW Filter) TQS-458F-7R Application Features IF filter for Cellular Phone CDMA system Miniature size : 11.4(W) x 5.0(D) x 1.40(H)mm Phase linearity improved model High selectivity Specifications Type TQS-458F-7R 110 MHz Nominal frequency [fo] fo ± 0.60 MHz min. 5dB Pass band (Relative to I.L. at fo) Insertion loss (at fo) 11.5 dB max. Ripple (peak to peak within fo ± 300 kHz) 0.7 dB max. Group delay distortion (within fo± 300 kHz) 500 ns max. Phase linearity (within fo ± 600 kHz) 1.5°RMS typ. Stop band attenuation (Referred to I.L. at fo) at fo ± 0.9 MHz at fo ± 1.70 MHz at fo ± 9.00 MHz 33 dB min. 33 dB min. 40 dB min. Balanced or Unbalanced : 770 Ω // -15 pF Balanced or Unbalanced : 1370 Ω // -12 pF Input Output Terminating impedance -20 °C to +75 °C Operating temperature range Package Outlines [Dimensions in mm] 1.40 ±0.2 2.54 ±0.15 11.4 ±0.2 5.0 ±0.2 Footprint [Dimensions in mm] 2.54 2.54 (G) or (I/0) 2.6 (G) (G) (G) 1.6 (I/0) 0.8 ±0.2 (I/0) (G) 12.2 (G) or (I/0) (G) 1 ±0.2 (G) 1.2 2.54±0.15 2.4 1.8 ±0.2 2.54 Marking (2001.11.) Surface Acoustic Wave Filter (SAW Filter) IF Filter (Phase linearity improved model) for Cellular Phone CDMA system TQS-458F-7R 110 MHz Electrical Data -20 9 -10 10 0 11 B A 12 20 13 30 14 40 15 50 16 60 17 70 18 80 A: –2.5 B: –1 110 B : LOSS (dB) A : LOSS (dB) 10 19 +2.5 +1 FREQUENCY (MHz) (2001.11.) Surface Acoustic Wave Filter (SAW Filter) TQS-459C-7R Features Application IF filter for W-CDMA Miniature size : 5.0(W) x 3.2(D) x 1.05(H)mm High selectivity Specifications Type TQS-459C-7R 190 MHz Nominal frequency [fo] fo ±1.92 MHz min. 3dB Pass band (Relative to I.L. at fo) Ripple (peak to peak within fo ± 1.92 MHz) 1.5 dB max. Insertion loss (at fo) 8.0 dB max. 130 ns max. Group delay distortion (within fo ± 1.92 MHz) Note.1) Effective Attenuation (Referred to I.L. at fo) at fo ± 5 MHz± 1.92 MHz at fo ± 10 MHz± 1.92 MHz at fo ± 20 MHz± 1.92 MHz 23 dB min. 40 dB min. 40 dB min. Input Output Terminating impedance Balanced or unbalanced : 325Ω// -16pF Balanced or unbalanced : 276Ω// -12pF Operating temperature range -20 °C to +70 °C Note1.) The definition of Effective Attenuation The Effective Attenuation is defined as logarithm of the root mean square of S21 absolute value, and is calculated with the equation below. { } 1 n 2 2 Re(S 21 ) + Im(S 21 ) ∑ 10 n k =1 10 log k (n : number of point) Package Outlines [Dimensions in mm] 1.05±0.15 5.0±0.2 3.2±0.2 Footprint [Dimensions in mm] Marking 1.95 1.95 (G) (I/0) (0.90) (I/0) (0.10) 1.25 1.25 1.50 3.3 (0.10) (1.20) 1.80 (0.58) (I/0) (G) (0.80) 1.90 1.20 (I/0) (1.30) (2001.11.) Surface Acoustic Wave Filter (SAW Filter) TQS-459C-7R IF Filter for Cellular Phone W-CDMA system (Rx) 190 MHz Electrical Data -30 5 -20 6 -10 7 A 8 B 10 9 20 10 30 11 40 12 50 13 60 14 70 A: –2.5 B: –5 190 B : LOSS (dB) A : LOSS (dB) 0 15 +2.5 +5 FREQUENCY (MHz) (2001.11.) Surface Acoustic Wave Filter (SAW Filter) TQS-460A-7R Application Features Miniature size : 5.0(W) x 3.2(D) x 1.05(H)mm High selectivity Balanced I/O or Unbalanced I/O IF filter for W-CDMA Specifications Type TQS-460A-7R 380 MHz Nominal frequency [fo] 3dB Pass band (Relative to I.L. at fo) 4.20 MHz min. Insertion loss (at fo) 12.0 dB max. Passband ripple (within fo±1.50 MHz) 1.5 dB max. Group delay distortion (within fo±1.50 MHz) 160 ns max. Stop band attenuation (Referred to I.L. at fo) fo + 5 MHz fo – 5 MHz fo ± 10 MHz 25 dB min. 30 dB min. 40 dB min. Balanced or Unbalanced : 520 Ω // -4 pF Input Output Terminating impedance Balanced or Unbalanced : 360 Ω // -6 pF Operating temperature range -20 °C to +70 °C Package Outlines [Dimensions in mm] 1.05±0.15 5.0±0.2 3.2±0.2 Footprint [Dimensions in mm] Marking 1.95 1.95 1.50 (I/0) (0.90) (I/0) or (G) (G) (0.10) (1.20) 3.3 (0.10) (0.80) (I/0) (G) 1.25 1.25 1.80 (0.58) 1.90 1.20 (1.30) (I/0) or (G) (2001. 4.) Surface Acoustic Wave Filter (SAW Filter) TQS-460A-7R IF Filter for Cellular Phone W-CDMA system (Rx) 380 MHz Electrical Data 9 10 A: LOSS (dB) 0 B 11 10 12 20 13 30 14 40 15 50 16 60 17 70 18 80 A:–25 B: –4 380 B: LOSS (dB) A 19 +25 +4 FREQUENCY (MHz) (2001. 4.) Surface Acoustic Wave Filter (SAW Filter) TQS-461E-7R Features Application Miniature size : 7.0(W) x 5.0(D) x 1.5 max.(H)mm High attenuation High selectivity IF filter for Cellular Phone CDMA system Specifications Type TQS-461E-7R Nominal frequency [fo] 110 MHz 5dB Pass band (Relative to I.L. at fo) fo ± 600 kHz min. Insertion loss (at fo) 11.0 dB max. Passband deviation (within fo±300 kHz) 1.5 dB max. Group delay distortion (within fo±300 kHz) 500 ns max. Typical 3.4°RMS Phase linearity (within fo ± 615 kHz) Stop band attenuation (Referred to I.L. at fo) at fo ± 0.9 MHz at fo ± 1.70 MHz at fo ± 9.00 MHz 33 dB min. 33 dB min. 40 dB min. Balanced or Unbalanced : 2.9k Ω // -7.4 pF Balanced or Unbalanced : 2.2k Ω // -6.0 pF Input Output -25 °C to +75 °C Operating temperature range Package Outlines [Dimensions in mm] 1.5 max. 2.54 ±0.15 7.0 ±0.2 1.27 1.27 ±0.15 (G) (G) (G) 1.95 1.5 ±0.2 2.54 Marking 7.8 1.27 1.45 5.0 ±0.2 Footprint [Dimensions in mm] 2.9 Terminating impedance (I/O) (I/O) 0.7 (I/O) 0.6 ±0.2 (I/O) (G) (G) (G) 1.0 ±0.2 (2002. 1.) Surface Acoustic Wave Filter (SAW Filter) TQS-461E-7R IF Filter for Cellular Phone CDMA system 110 MHz Electrical Data -20 9 -10 10 0 11 10 12 20 A 13 30 14 40 15 50 16 60 17 70 18 80 A: –2.5 B: –1 110 B : LOSS (dB) A : LOSS (dB) B 19 +2.5 +1 FREQUENCY (MHz) (2002. 1.) Surface Acoustic Wave Filter (SAW Filter) TQS-461F-7R Features Application Miniature size : 7.0(W) x 5.0(D) x 1.5 max.(H)mm High attenuation High selectivity IF filter for Cellular Phone CDMA system Specifications Type TQS-461F-7R Nominal frequency [fo] 183.6 MHz 5dB Pass band (Relative to I.L. at fo) fo ± 625 kHz min. Insertion loss (at fo) 10.0 dB max. Passband deviation (within fo±300 kHz) 1.5 dB max. Passband ripple (within fo±300 kHz) 0.8 dB max. Group delay distortion (within fo±300 kHz) 600 ns max. Typical 2.5°RMS Phase linearity (within fo ± 615 kHz) Stop band attenuation (Referred to I.L. at fo) at fo ± 0.9 MHz at fo ± 1.25 MHz at fo ± 1.70 MHz at fo ± 2.05 MHz 10MHz to fo-9MHz fo+9MHz to fo+50MHz 33 dB min. 33 dB min. 35 dB min. 35 dB min. 45 dB min. 40 dB min. T.B.D. Terminating impedance -30 °C to +85 °C Operating temperature range Package Outlines [Dimensions in mm] 1.5 max. 2.54 ±0.15 7.0 ±0.2 1.27 (G) (G) (G) 1.45 1.27 ±0.15 1.95 1.5 ±0.2 2.54 Marking 7.8 1.27 2.9 5.0 ±0.2 Footprint [Dimensions in mm] (I/O) (I/O) 0.7 (I/O) 0.6 ±0.2 (I/O) (G) (G) (G) 1.0 ±0.2 (2002. 2.) Surface Acoustic Wave Filter (SAW Filter) TQS-461F-7R IF Filter for Cellular Phone CDMA system 183.6 MHz 9 80 10 70 11 60 12 50 13 A 40 14 30 15 20 16 10 B : Phase ( °) A : LOSS (dB) Electrical Data B 17 0 18 -10 19 –1.0 -20 +1.0 183.6 FREQUENCY (MHz) 0 Offset 9.0dB 10 C 20 A,B : LOSS (dB) 30 40 50 60 70 80 90 100 C: –2.5 D: –50 D 183.6 FREQUENCY (MHz) +2.5 +50 (2002. 2.) Surface Acoustic Wave Filter (SAW Filter) TQS-461G-7R Features Application Miniature size : 7.0(W) x 5.0(D) x 1.5 max.(H)mm High attenuation High selectivity IF filter for Cellular Phone CDMA system Specifications Type TQS-461G-7R Nominal frequency [fo] 183.6 MHz 5dB Pass band (Relative to I.L. at fo) fo ± 615 kHz min. 11.0 dB max. Including losses in matching circuit. Matching inductor size is 0603(inch). Insertion loss (at fo) Passband deviation (within fo±300 kHz) 1.2 dB max. Passband ripple (within fo±300 kHz) 1.2 dB max. Phase linearity (within fo ± 615 kHz) Typical 2.2°RMS Stop band attenuation (Referred to I.L. at fo) 10MHz to fo-9MHz fo-9MHz to fo-0.9MHz fo+0.9MHz to fo+9MHz fo+9MHz to fo+25MHz fo+25MHz to fo+100MHz at fo ± 0.9 MHz at fo ±1.25 MHz, ±1.70 MHz, ±2.05 MHz Input 360 Ω // -11.4 pF Output 260 Ω // -17.3 pF -30 °C to +85 °C Operating temperature range Package Outlines [Dimensions in mm] 1.5 max. 2.54 ±0.15 7.0 ±0.2 1.27 1.27 ±0.15 (G) (G) (G) 1.95 1.5 ±0.2 2.54 Marking 7.8 1.27 1.45 5.0 ±0.2 Footprint [Dimensions in mm] 2.9 Terminating impedance 45 dB min. 33 dB min. 33 dB min. 40 dB min. 45 dB min. 33 dB min. 35 dB min. (I/O) (I/O) 0.7 (I/O) 0.6 ±0.2 (I/O) (G) (G) (G) 1.0 ±0.2 (2002. 6.) Surface Acoustic Wave Filter (SAW Filter) TQS-461G-7R IF Filter for Cellular Phone CDMA system 183.6 MHz Electrical Data 9 80 10 70 A 60 12 50 13 40 14 30 15 20 16 10 B 17 0 18 19 –1.0 B : Phase ( °) A : LOSS (dB) 11 -10 -20 +1.0 183.6 FREQUENCY (MHz) 0 Offset 9.4dB 10 C 20 C,D : LOSS (dB) 30 40 50 60 70 80 D 90 100 C: –2.5 D: –50 183.6 FREQUENCY (MHz) +2.5 +50 (2002. 6.) Surface Acoustic Wave Filter (SAW Filter) TQS-462A-7R Application Features IF filter for Cellular Phone CDMA system Miniature size : 9.1(W) x 4.8(D) x 1.55(H)mm High attenuation High selectivity Specifications Type TQS-462A-7R Nominal frequency [fo] 183.6 MHz 5dB Pass band (Relative to I.L. at fo) fo ± 0.62 MHz min. Insertion loss (at fo) 9.0 dB max. Ripple (peak to peak within fo ± 300 kHz) 0.7 dB max. Group delay distortion (within fo± 300 kHz) 0.6 µs max. Phase linearity (within fo ± 600 kHz) 4.0°RMS max. Stop band attenuation (Referred to I.L. at fo) at fo ± 0.9 MHz at fo ± 1.25 MHz at fo ± 1.70 MHz at fo ± 2.05 MHz at fo ± 9.00 MHz 33 dB min. 33 dB min. 33 dB min. 33 dB min. 40 dB min. Balanced or Unbalanced : 500 Ω // -16 pF Balanced or Unbalanced : 380 Ω // -14 pF Input Output Terminating impedance -30 °C to +85 °C Operating temperature range Package Outlines [Dimensions in mm] Footprint [Dimensions in mm] 2.54±0.15 4.8 ±0.2 9.1±0.2 Marking 9.9 2.54 2.54 (G) 0.8±0.2 (I/O) (G) 1.45 (I/O) 1.0±0.2 (G)or (I/O) 0.9 (G) 1.8±0.2 (G) 2.54±0.1 2.25 2.54±0.1 5.6 2.54 1.55±0.2 (G) (G)or (I/O) (G) (2001.11.) Surface Acoustic Wave Filter (SAW Filter) TQS-462A-7R IF Filter for Cellular Phone CDMA system 183.6 MHz Electrical Data 9 A : LOSS (dB) -20 B 10 -10 11 0 12 10 13 20 A 14 30 15 40 16 50 17 60 18 70 A: –2.5 B: –1 183.6 B : LOSS (dB) -30 19 +2.5 +1 FREQUENCY (MHz) (2001.11.) Surface Acoustic Wave Filter (SAW Filter) TQS-462B-7R Application Features IF filter for Cellular Phone CDMA system Miniature size : 9.1(W) x 4.8(D) x 1.55(H)mm High attenuation High selectivity Specifications Type TQS-462B-7R Nominal frequency [fo] 183.6 MHz 5dB Pass band (Relative to I.L. at fo) fo ± 610 kHz min. Insertion loss (at fo) 11.0 dB max. Passband deviation (within fo±300 kHz) 0.8 dB max. 3.2°RMS max. Phase linearity (within fo ± 615 kHz) Stop band attenuation (Referred to I.L. at fo) at fo ± 0.9 MHz at fo ± 1.25 MHz at fo ± 1.70 MHz at fo ± 2.05 MHz f < fo-9.00 MHz or f > fo+9.00 MHz 33 dB min. 35 dB min. 35 dB min. 35 dB min. 40 dB min. Balanced or Unbalanced : 660 Ω // -12 7 pF Balanced or Unbalanced : 720 Ω // -13.8 pF Input Output Terminating impedance -30 °C to +85 °C Operating temperature range Package Outlines [Dimensions in mm] Footprint [Dimensions in mm] 2.54±0.15 4.8 ±0.2 9.1±0.2 Marking 9.9 2.54 2.54 (G) 0.8±0.2 (I/O) (G) 1.45 (I/O) 1.0±0.2 (G)or (I/O) 0.9 (G) 1.8±0.2 (G) 2.54±0.1 2.25 2.54±0.1 5.6 2.54 1.55±0.2 (G) (G)or (I/O) (G) (2001.11.) Surface Acoustic Wave Filter (SAW Filter) TQS-462B-7R IF Filter for Cellular Phone CDMA system 183.6 MHz Electrical Data -30 9 -20 10 B 11 0 12 10 13 20 14 A 30 15 40 16 50 17 60 18 70 A: –2.5 B: –1 183.6 B : LOSS (dB) A : LOSS (dB) -10 19 +2.5 +1 FREQUENCY (MHz) (2001.11.) Surface Acoustic Wave Filter (SAW Filter) TQS-465AA-7R Application Features Miniature size : 6.0(W) x 3.5(D) x 1.15(H)mm High attenuation High selectivity IF filter for Cellular Phone CDMA system Specifications Type typ. TQS-465AA-7R Nominal frequency [fo] 183.6 MHz 5dB Pass band (Relative to I.L. at fo) fo ± 615 kHz min. 11.0 dB max. Insertion loss (at fo) Including losses in matchng circuit fo ± 663 kHz (1) Matching inductor size is 1008 (inch) (2) Matching inductor size is 0603 (inch) 8.0 dB (1) 9.0 dB (2) Passband deviation (within fo±300 kHz) 1.2 dB max. 0.4 dB Pass band ripple (within fo±300 kHz) 1.2 dB max. 0.4 dB Phase linearity (within fo ± 615 kHz) 3.2°RMS max. 1.9°RMS 33 dB min. 33 dB min. 33 dB min. 33 dB min. 40 dB min. 35 dB min. 45 dB min. 40 dB 41 dB 43 dB 38 dB 45 dB 41 dB 50 dB Stop band attenuation (Referred to I.L. at fo) at fo ± 0.9 MHz at fo ± 1.25 MHz at fo ± 1.70 MHz at fo ± 2.05 MHz 10MHz ≤ f ≤ fo-9.0 MHz fo+9.0MHz ≤ f ≤ fo+15.0 MHz fo+15.0MHz < f ≤ fo+100 MHz Balanced or Unbalanced : 1020 Ω // -2.5 pF Balanced or Unbalanced : 810 Ω // -4.4 pF Input Output Terminating impedance -30 °C to +85 °C Operating temperature range Package Outlines [Dimensions in mm] Footprint [Dimensions in mm] 3.5 ±0.13 1.27±0.2 6.0±0.13 6.8 Marking 2.54 (0.6) (G) 1.27 1.45 (G) (G) (Input) (Output) 2.2 (0.9) (1.75) 2.54±0.2 0.7 4.3 1.15±0.2 (Output) (Input) (G) (G) (G) (2002.12.) Surface Acoustic Wave Filter (SAW Filter) TQS-465AA-7R IF Filter for Cellular Phone CDMA system 183.6 MHz Electrical Data 0 7 10 8 A 20 9 A : LOSS (dB) 10 40 11 50 12 60 13 70 14 80 15 90 16 100 A: –2.5 B: –1 183.6 B : LOSS (dB) B 30 17 +2.5 +1 FREQUENCY (MHz) (2002.12.)