Suntan® Su® TSL

SMD TYPE LED
Suntan
®
TSL-0805UR000MTH
FEATU R E S
APPLI CAT I O N S
‧ Wide Viewing Angle 120
o
‧ Optical indicator
‧ Reflow Solderable
‧ Indoor display
‧ High Luminous Intensity and Low Power Dissipation
‧ Backlighting in dashboard and switch
‧ Good Reliability and Long Life
‧ Flat Backlighting for LCD, symbol and display
‧ Complied With RoHS Directive
‧ General use
T E C H N I CAL DATA S H E E T
This product is generally used as indicator and luminary for electronic equipment such as household appliance, communication
equipment and dashboard.
Notes:
1.
All dimension units are millimeters.
All dimension tolerance is ±0.2mm unless otherwise noted.
2.
Selection Guide
Dice
Lens Type
Red
(AIGaInP)
Water Clear
Min
Luminous intensity (mcd) @ 20mA
Typ
Max
Viewing Angle
2Ø1/2
50
120
300
120
Note:
1.
1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.
The above luminous intensity measurement allowance tolerance ±10%
Electrical / Optical Characteristics at Ta=25℃
Parameter
Forward Voltage
Reverse Current
Dominate Wavelength
Symbol
VF
IR
λd
Min.
1.8
-620
Typ.
2.0
---
Max
2.4
10
635
Units
V
uA
nm
Test conditions
IF=20mA
VR=5V
IF=20mA
Absolute Maximum Ratings at Ta=25℃
Parameter
Symbol
Power Dissipation
Pd
DC Forward Current
IF
Peak Forward Current 【1】
IFP
Reverse Voltage
VR
Electrostatic Discharge (HBM)
ESD
Operating Temperature
Topr
Storage Temperature
Tstg
Note:
1.
1/10 Dut cycle, 0.1ms pulse width.
2.
The above forward voltage measure ment allowance tolerance ±0.1V.
Suntan® Technology Company Limited
Website: www.suntan.com.hk
Rating
100
25
100
5
±2000
-30~+85
-40~+100
Email: [email protected]
Units
mW
mA
mA
V
V
℃
℃
Tel: (852) 8202 8782
Fax: (852) 8208 6246
SMD TYPE LED
Suntan
®
TSL-0805UR000MTH
Typical Optical Characteristics Curves
Ambient Temperature VS. Forward Current
Suntan® Technology Company Limited
Website: www.suntan.com.hk
Email: [email protected]
Tel: (852) 8202 8782
Fax: (852) 8208 6246
SMD TYPE LED
Suntan
®
TSL-0805UR000MTH
Carrier Tape
All dimensions in mm, tolerances unless mentioned is ±0.1mm.
Details Of Carrier Tape
Moisture Resistant Packaging
Note: Specification are subject to change without notice. For more detail and update, please visit our website.
Suntan® Technology Company Limited
Website: www.suntan.com.hk
Email: [email protected]
Tel: (852) 8202 8782
Fax: (852) 8208 6246