Hebei I.T. (Shanghai) Co., Ltd. Color Wave L ength Temperature （nm） （K） STRIP SPECIFICATION Brightness （lm） Power （W/M） 2Ø1/2 Half intensity angle( °) IP Rank Order No. Size (mm) STRF4-3528-R60-12V L5000*W8*H3 --- 620-630 44-54 4.8W/M 120° IP64 STRF4-3528-G60-12V L5000*W8*H3 --- 585-595 44-54 4.8W/M 120° IP64 STRF4-3528-B60-12V L5000*W8*H3 --- 455-470 30-36 4.8W/M 120° IP64 STRF4-3528-Y60-12V L5000*W8*H3 --- 510-525 76-96 4.8W/M 120° IP64 STRF4-3528-W3-12V L5000*W8*H3 2700-3300K --- 180-200 4.8W/M 120° IP64 STRF4-3528-W6-12V L5000*W8*H3 5500-6500K --- 180-220 4.8W/M 120° IP64 STRF5-5050-R30-12V L5000*W10*H3 --- 620-630 200-240 7.2w/m 120° IP64 STRF5-5050-G30-12V L5000*W10*H3 --- 585-595 200-240 7.2w/m 120° IP64 STRF5-5050-B30-12V L5000*W10*H3 --- 455-470 150-190 7.2w/m 120° IP64 STRF5-5050-Y30-12V L5000*W10*H3 --- 510-525 220-260 7.2w/m 120° IP64 STRF5-5050-W3-12V L5000*W10*H3 2700-3300K --- 200-230 7.2w/m 120° IP64 STRF5-5050-W6-12V L5000*W10*H3 5500-6500K --- 300-320 7.2w/m 120° IP64 STRF4-3528-R60-12V-WP-T L5000*W10*H5 --- 620-630 44-54 4.8W/M 120° IP66 STRF4-3528-G60-12V-WP-T L5000*W10*H5 --- 585-595 44-54 4.8W/M 120° IP66 STRF4-3528-B60-12V-WP-T L5000*W10*H5 --- 455-470 30-36 4.8W/M 120° IP66 STRF4-3528-Y60-12V-WP-T L5000*W10*H5 --- 510-525 76-96 4.8W/M 120° IP66 STRF4-3528-W3-12V-WP-T L5000*W10*H5 2700-3300K --- 180-200 4.8W/M 120° IP66 STRF4-3528-W6-12V-WP-T L5000*W10*H5 5500-6500K --- 180-220 4.8W/M 120° IP66 STRF5-5050-R30-12V-WP-T L5000*W12*H5 --- 620-630 200-240 7.2w/m 120° IP66 STRF5-5050-G30-12V-WP-T L5000*W12*H5 --- 585-595 200-240 7.2w/m 120° IP66 STRF5-5050-B30-12V-WP-T L5000*W12*H5 --- 455-470 150-190 7.2w/m 120° IP66 STRF5-5050-Y30-12V-WP-T L5000*W12*H5 --- 510-525 220-260 7.2w/m 120° IP66 STRF5-5050-W3-12V-WP-T L5000*W12*H5 2700-3300K --- 200-230 7.2w/m 120° IP66 STRF5-5050-W6-12V-WP-T L5000*W12*H5 5500-6500K --- 300-320 7.2w/m 120° IP66 Picture Hebei I.T. (Shanghai) Co., Ltd. STRIP SPECIFICATION Red 620-630 STRF5-5050-RGB-12V L5000*W12*H5 Green 585-590 7.2w/m 120° IP64 7.2w/m 120° IP66 Blue 455-470 Red 620-630 STRF5-5050-RGB-12V-WP-T L5000*W12*H5 Green 585-590 Blue 455-470 Installation guide and flow chart: Cut the length to required size Connection between strips Check connections Select the appropriate driving power Power on Cut the length to required size In order to get required length, you should cut strip according to the dotted line. Connection between strips Each strip (cropped included) is marked with two pads “+”、”-” on its head and tail. If strip A need to be connected with strip B, you should connect two “+” with red wire and two “-” with black wire. Check connections You should check connections carefully, and test “+” and ”-” of the strip with multimeter to make sure it has the right connections. Select the appropriate driving power Strip with 12VDC power supply. The electric current of power is related to the total length of strip and calculated as following formula: Power (W) >= Total length (M) * Power of per meter Power on After about 1 minute, touch the surface temperature of driving power by hand, if you feel very hot, you should replace the driving power.