FL626 HYBRID LUMINANCE PRE-FILTER Filter Shape Lowpass Passband Shape Flat Sampling Frequency 13.5 MHz Insertion Gain at 100 kHz 0 dB, 6 dB ± 0.2 dB End Of Passband 5.5 MHz Passband Amplitude Ripple < 0.3 dB Loss at ½ S.F. wrt 100 kHz 12 dB ± 3 dB Start Of Stopband 8 MHz Stopband Attenuation wrt 100 kHz > 40 dB to 20 MHz > 35 dB to 200 MHz Group Delay Ripple < 15 ns to 5.0 MHz Delay Time at 200 kHz 300 ns nominal Return Loss 75 ohm termination >40 dB 2T Pulse And Bar K - Rating < 0.5 % typ, 1 % max. S/N ratio -75 dB to 5.5 MHz Differential Phase (swept over ± 0.5v) 0.150 typ. Differential Gain 0.1% typ. Supply Voltage ± 5v to ± 12v Typical Current 28 mA per rail Input Impedance 10 MΩ typical Output Impedance < 1Ω typical Temperature Range 0°C to 40°C Package DR00219A Note – Differential phase and gain improve at higher supply voltages, however this results in increased operating temperature. © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA101.DOC Page 1 of 2 Jun-99(A) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA101.DOC Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Jun-99(A)