FHS1350F PRE A-D ANTI-ALIASING FILTER The FHS1350F is a low cost solution for pre A-to-D anti-aliasing filtering of luminance, composite or Y/C signals. Interfacing to the system is simplified with high input and low output impedance opamp buffer stages. Filter Shape Lowpass Passband Shape Flat Gain - 0.2 dB + 0.2 dB +5.8 dB + 0.2 dB End Of Passband 5.5 MHz Passband Amplitude Ripple wrt 100 kHz + 0.2 dB max Loss at 8.0 MHz wrt 5.5 MHz 30 dB + 2 dB Start Of Stopband 9.0 MHz Stopband Attenuation wrt 5.5 MHz 40 dB min to 50 MHz Group Delay Ripple wrt 200 kHz + 25 ns max to 5.5 MHz Delay Time at 200 kHz 314 ns + 10 ns Supply Voltage + 5v to + 8v Typical Current 25 mA per rail at + 5v Input Impedance 10 MΩ typical Aqueous Washable Yes Package DR00032A with pin 6 open with pin 6 gnd © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA156d Page 1 of 2 Dec-99(A) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA156d Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Dec-99(A)