Crane Aerospace & Electronics Microwave Solutions ARC SERIES – VARIABLE ATTENUATORS, MANUAL TECHNICAL FEATURE FEATURES GENERAL SPECIFICATIONS DC to 400 MHz Resetability (Granularity): 0.2 dB typ. 0 to 20 dB range Average power: Broadband Weight, nominal: Panel Mountable Operating Temperature: -55° to +85°C BNC & SMA 0.5 Watts max. 2 oz. (56 g) PERFORMANCE DESCRIPTION The ARC series consists of continuously variable attenuators utilizing compnesaed Bridged Tee newtorks to vary signal power. These constant impedance, very broadband attentuators are designd to cover frequencies from DC to 400 MHz. Similar units are available with electronic control of attenuation in the ARE and ARES series. All Merrimac attenuators are designed for high reliability in accordance with applicable paragraphs of MIL-A-24215 and can be supplied screened to meet specific military and space applications. Crane Aerospace & Electronics Microwave Solutions – Merrimac Industries 41 Fairfield Place, West Caldwell, NJ 07006 + 1.973.575.1300 ext. 1309 [email protected] www.craneae.com/mw Page 1 of 2 Crane Aerospace & Electronics Microwave Solutions ARC SERIES – VARIABLE ATTENUATORS, MANUAL PACKAGE OUTLINE ARC.doc. This revision supersedes all previous releases. All technical information is believed to be accurate, but no responsibility is assumed for errors. We reserve the right to make changes in products or specifications without notice. Copyright © 2012 Crane Electronics, Inc. All rights reserved. Page 2 of 2