ARC Series VARIABLE ATTENUATORS, MANUAL DC to 400 MHz / 0 to 20 dB Range / Broadband / Panel Mountable / 50 & 75 / BNC & SMA PRINCIPAL SPECIFICATIONS Frequency Performance Attenuation Flatness, Model Range, Band, Range, Pk-Pk, Number MHz MHz dB, Min. dB, Typ. Insertion Loss, VSWR, dB, Max. Max. Impedance, Nom. ARC-1 DC - 400 DC - 50 DC - 200 DC - 400 0 - 20 0 - 13 0-8 (See Graph Below) 1.0 1.5 2.5 1.5:1 1.8:1 2.2:1 50 Ω ARC-2 DC - 400 DC - 50 DC - 200 DC - 400 0 - 20 0 - 13 0-8 (See Graph Below) 1.0 1.5 2.5 1.5:1 1.8:1 2.2:1 50 Ω ARC-3 DC - 400 DC - 50 DC - 200 DC - 400 0 - 20 0 - 13 0- 8 (See Graph Below) 1.0 1.5 2.5 1.5:1 1.8:1 2.2:1 50 Ω ARC-4 DC - 400 DC - 50 DC - 200 DC - 400 0 - 20 0 - 13 0- 8 (See Graph Below) 1.0 1.5 2.5 1.5:1 1.8:1 2.2:1 50 Ω Typical Performance Mechanical Configuration & Connector Panel-Screw Drive/SMA Panel-Screw Drive/SMA w/Knob Panel-Screw Drive/BNC Panel-Screw Drive/BNC w/Knob GENERAL SPECIFICATIONS Resetability (Granularity): Average Power: Weight, nominal: Operating Temperature: 0.2 dB typ. 0.5 Watts max. 2 oz. (56 g) -- 55° to +85°C General Notes: 1. The ARC series consists of continuously variable attenuators utilizing compensated Bridged Tee Networks to vary signal power. These constant impedance, very broadband attenuators are designed to cover frequencies from DC to 400 MHz. Similar units are available with electronic control of attenuation in the ARE and ARES series. 2. All Merrimac Attenuators are designed for high reliability in accordance with applicable paragraphs of MIL-A-24215 and can be supplied screened to meet specific military and space applications. 28Jun02 For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531 ARC Series VARIABLE ATTENUATORS, MANUAL DC to 400 MHz / 0 to 20 dB Range / Broadband / Panel Mountable / 50 & 75 / BNC & SMA ARC-1 (& ARC-3) Package Outline NOTES: 1. Tolerance on 3 place decimals ±0.020(.51) except as noted. 2. Dimensions in inches over millimeters. 3. ARC-3 as ARC-1 but with BNC connectors ARC-2 (& ARC-4, ARC-7) Package Outlines NOTES: 1. Tolerance on 3 place decimals ±0.020 (0.51) except as noted. 2. Dimensions in inches over millimeters. 3. Knob is shipped to customer loose. 4. Secure knob with (2) #4 screws supplied with knob. 5. ARC-4 and ARC-7 as ARC-2 but with BNC connectors. 26Feb96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531