Hydroloks® and Control Cables - Crane Aerospace & Electronics

Hydroloks® and Control Cables
HL
HV
AL
The Standard for Seat Recline & Control
History of Excellence
The industry-standard Hydrolok delivers an infinite
range of adjustment options, with the longest lifespan,
for the lowest total cost of ownership.
Compact AA Hydrolok® – Completely interchangeable
with most gas lock applications, the compact AA
design is comparable to gas locks in size, weight,
and cost yet boasts up to three times the reliability.
AA Hydroloks require virtually no maintenance.
• Infinite adjustment capability – Can go on any
seat in the aircraft regardless of allowable recline;
allows changes during a cabin reconfiguration or
seat refurbishment
AL Hydrolok® – Certified drop-in replacement for HV,
HL and UL10 locks. Infinite adjustment of the lock for
multiple seat pitch settings.
• Longest service life – Designed and tested for
250,000+ cycles for maximum reliability, with the
longest standard warranty in the industry
• Lowest total cost of ownership – Lifetime savings
on labor, repair and replacement costs over both gas
and other hydraulic locks
• Quick and easy installation – Drop-in replacement
for almost all recline locks in service saves time and
labor
• Industry-standard Control Cables – Dependable
push-button Control Cables offer low friction with
minimal stretch and low button force for ease of
operation
• More miles flown – Over 500,000 Hydroloks and
more than 1 million AC/MC Series Control Cables sold
AC71
AC21
Hydroloks® and Control Cables
AL Hydrolok® Series
HL & HV Hydrolok® Series
AL Standard Features
• Aluminum impact extruded cylinder
• Integral clevis attachment end
• 4130 steel chrome plated piston
• Proprietary hydraulic seal technology
• Anodized protective finish
• Continuous fluid compensation
• Tamper proof stroke adjustment
• Lockout setting
• Rigid locking at any position
Mounting length
6.1-9.8 in. (155-249 mm)
Optional Features
• Blade attachment end
• Custom attachment ends/lengths
Output force extended*
65-80 lbs. (289-356 N)
65-85 lbs. (289-378 N)
70-80 lbs. (311-356 N)
75-80 lbs. (334-356 N)
Performance Specifications
Override force...........70 lbs. (311 N)
Button force..............4 lbs. (14 N)
Compression load.....3000 lbs. (13.3 kN)
Tensile load...............3000 lbs. (13.3 kN)
Proof load.................1500 lbs. (6.6 kN)
Nominal weight........9 oz. (255 g)
Speed to extend........ 4 sec. nominal
Operational life.........250,000 cycles
3/8-24 UNF-3A THD
Available stroke
0-1.380 in. (0-35.05 mm)
Output force compressed*
95-120 lbs. (423-534 N)
105-140 lbs. (467-623 N)
135-145 lbs. (600-645 N)
AL Hydrolok®
Performance Specifications
Override force........... 70 lbs. (311 N)
Button force.............. 4 lbs. (14 N)
Compression load......3000 lbs. (13.3 kN)
Tensile load................3000 lbs. (13.3 kN)
Proof load................. 1500 lbs. (6.6 kN)
Nominal weight........ 9 oz. (255 g)
Speed to extend........ 4 sec. nominal
Operational life......... 250,000 cycles
.250
3/8-24 UNF-3A THD
1.230
Mounting length
6.1-9.8 in. (155-249 mm)
Available stroke
0-3.19 in. (0-35.30 mm)
Output force compressed*
95-120 lbs. (423-534 N)
105-140 lbs. (467-623 N)
135-145 lbs. (600-645 N)
Output force extended*
65-80 lbs. (289-356 N)
65-85 lbs. (289-378 N)
70-80 lbs. (311-356 N)
75-80 lbs. (334-356 N)
Optional Features
• Blade attachment end
• Custom attachment ends/lengths
* Varies with mounting length
* Varies with mounting length
HV/HL Hydrolok®
.252
1.115
.750
1.33
HL & HV Series
Standard Features
• Machined aluminum cylinder
• Machined clevis attachment end
• 4130 steel chrome plated piston
• Proprietary hydraulic seal technology
• Anodized protective finish
• Automatic fluid replenishment
• Tamper proof stroke adjustment
• Lockout setting
• Rigid locking at any position
MOUNTING LENGTH
.750
1.25
.750 DIA
MOUNTING LENGTH
.750
BLADE
.280
CLEVIS
AC71 Control
BLADE
.719
Die cast aluminum output with
quick release clip. Injection molded
button with low installation height
.750
.280
.195
.280
CLEVIS
AC21 Control
.255
.719
Die cast aluminum output with
quick release clip. Rugged injection
molded button housing
.955
AC Control Standard Features
• Kink-resistant, non-stretch cable
• Spring steel anti-abrasion conduit
• Anodized finish button and bezel
• FAA 14 CFR 25.853 compliant
Crane Aerospace & Electronics
•
Crane Aerospace & Electronics
www.craneae.com
•
Hydrolok and Control Cables 4 2015
.281
phone 818.526.2600
.276
.160
1.390