Precision Sensors Selection Guide

SpecSensors.com
Application - Specific Solutions
Often, a 100% off-the-shelf sensor will not meet the unique measurement and environmental demands found
in many OEM applications. Our experienced engineering teams are ready to develop a custom solution that
meets your specific requirements. Whether modifying an existing sensor design or working from a “clean sheet”
approach, the resulting MS sensor will be tailored to your exact requirements and push the envelope
of product performance.
A World of Precision,
High Reliability Applications
Flexible & Low Cost
Manufacturing Centers
For applications that require exacting performance
and the ability to withstand demanding environmental
conditions, turn to Measurement Specialties. We design,
manufacture and test our sensors to meet a variety
of IP or NEMA ratings, military standards and other
high reliability requirements, as well as general
commercial applications.
In addition to our three manufacturing facilities
in St. Marys, PA, Grass Valley, CA and Akron, OH,
Measurement Specialties has low cost production
centers in Mexico and China. These highly efficient
plants provide additional capacity and flexibility,
allowing us to schedule production globally and
ramp up to meet fast-track delivery requirements.
Responsive Engineering
& Customer Service
World Class Quality
We understand the need for speed in today’s fast
paced product development world. Our talented
engineers can modify an existing sensor product or
design a completely new solution within a timeline
that meets your requirements. Following a production
release, our customer service group will work with you
for complete global logistic support, including schedule
sharing programs.
Measurement Specialties’ products are ISO 9001:2008
certified and adhere to world class manufacturing
techniques to ensure each customer receives the
reliability they demand. This commitment to quality
has produced a reputation for dependability and
resulted in preferred supplier status at many of
the world’s leading OEMs.
Precision Sensors
Precision Inertial
Products Operations
Precision Position
Sensors Operations
Advanced Thermal
Products Operations
Selection Guide
2236 N. Cleveland-Massillon Road
Akron, Ohio 44333
Phone: 330-659-3312
Fax:
330-659-3286
424 Crown Point Circle
Grass Valley, California 95945
Phone: 530-273-4608
Fax:
530-273-0769
1028 Graphite Road
St. Marys, Pennsylvania 15857
Phone: 814-834-1541
Fax:
814-834-1556
Precision Inertial Products • Precision Position Sensors & Input Controls
Precision Temperature Sensors & Heater Assemblies
Spectrum Sensors
Headquarters
Global Operations
CERTIFIED
EUROPE
Schwabach, Germany
8061 Avonia Road
Fairview, Pennsylvania 16415
Phone: 814-474-2484
Fax:
814-474-2485
(Position Sensors)
CHINA
Dong Guan City, Guang Dong Province
Measurement Specialties offers a diverse family of position, temperature and inertial
measurement sensors that can be custom designed or modified for your application
and delivered in the industry’s shortest lead times. Complementing our flexible approach
to finding the ideal sensing or heating solution for your design are our low cost
manufacturing facilities and global logistics … adding up to the most cost effective,
high performance sensors available today!
Precision Sensor Applications
Precision Inertial Products & Systems
API Technologies, a publicly traded company (NASDAQ: ATNY), designs, develops and
manufactures electronic systems, subsystems, RF and secure solutions for technically
demanding applications in the defense, aerospace and commercial industries.
www.apitech.com
An industry leader in precision sensors for position,
temperature and inertial measurement
CERTIFIED
MEXICO
Juarez, Mexico
About API Technologies Corporation:
CERTIFIED
Precision Sensors
• Military & Aerospace - weapons research/development and testing, stores separation and captive
carry testing, air refueling drogues, helicopter cockpit instrumentation, training metrics, HUMS for
aircraft PM
• Alternative Energy - wind turbine sway and safety systems, condition monitoring of wind turbines,
offshore platform movement
• Transportation - automobile dynamics, railway monitoring (vibration, braking and acceleration),
commercial shipping
• Off-Highway Equipment - compacting machine movement, pile driver hammer position
• Commercial/Industrial - machine vibration, robotic movements, pipeline inspection, building monitors,
bridge/dam structural analysis, seismic activity
Precision Position Sensors & Input Controls
RF Solutions (RFS)
Systems &
Subsystems
Solutions
• RF & Microwave Filters
• Microwave Components
• IMAs
• Frequency Sources
• Integrated Solutions
• Coaxial Filters & Interconnects
• Power Filters
• Film Capacitors
• Specialty Connectors
• Antennas
• Advanced Ceramics
• Sensors & Measurement
• Components & Subsystems
• MIL-STD-1553
• Custom Hybrids
• Engineered Systems
• Engineering Services
• Power Solutions
• AC-AC Converters
• DC-DC Converters
• Custom Power Supplies
Electronics
Manufacturing
Services (EMS)
• New Product Introduction
(NPI) & Rapid Prototyping
• Electronics Manufacturing
• Substrate Manufacturing
• Mechanical Production
• Design Engineering (DfM)
• Integration & Testing
• Inertial Systems
• Position Sensors
• Temperature Sensors
AHA
4/12
10M
27-0183-0002
©2012 API Technologies Corp.
Printed in U.S.A.
Secure Systems
& Information
Assurance
Solutions (SSIA)
• Encryption
• Secure Access
• Information Assurance
• TEMPEST & Emanation
Security
• Military & Aerospace - aircraft cockpit instruments, fuel and throttle controls, angle of attack controls,
missile fin actuators, weapons guidance controls, stall warning, remote piloted vehicle actuation, turret
and brake pedal vehicle controls, gun elevation and steering controls, vehicle joysticks
• Medical - robot joint feedback, imaging equipment, prosthetics, physical therapy equipment,
endoscopy controls
• Off-Highway Vehicles - actuator controls, joystick controls, steering systems, diesel engine throttles,
diesel emissions systems
• Commercial/Industrial - camera positioning devices, process control valves, automation controls,
wind direction devices
Precision Temperature Sensors & Heater Assemblies
• Military & Aerospace - cabin and air inlet, engine fluids, brake systems, transmission/gear fluid,
fuel systems, climate controls, hydraulic systems, de-icing systems, on-board electronics, missile
guidance and launch, satellites, radar systems, and electronics
• Medical - imaging equipment, diagnostic and lab equipment, blood analyzers, anesthesia delivery,
medical storage, dialysis equipment, incubators
• Off-Highway Vehicles - climate control, diesel engine fluids, fuel systems, brake systems,
emissions control systems
• Commercial/Industrial - power management, appliance motors, gas detection and analysis
• Refrigeration - supermarket refrigeration systems and controls, walk-in coolers, defrost controls
• HVAC - chillers, heat pumps, PTACs, boilers, furnace, air handlers, zone controls
• Food & Beverage - soda and coffee dispensers, POS refrigerators, display coolers, heating elements,
galley products
• Pool & Spa - water heaters and sensors
SpecSensors.com
Application - Specific Solutions
Often, a 100% off-the-shelf sensor will not meet the unique measurement and environmental demands found
in many OEM applications. Our experienced engineering teams are ready to develop a custom solution that
meets your specific requirements. Whether modifying an existing sensor design or working from a “clean sheet”
approach, the resulting MS sensor will be tailored to your exact requirements and push the envelope
of product performance.
A World of Precision,
High Reliability Applications
Flexible & Low Cost
Manufacturing Centers
For applications that require exacting performance
and the ability to withstand demanding environmental
conditions, turn to Measurement Specialties. We design,
manufacture and test our sensors to meet a variety
of IP or NEMA ratings, military standards and other
high reliability requirements, as well as general
commercial applications.
In addition to our three manufacturing facilities
in St. Marys, PA, Grass Valley, CA and Akron, OH,
Measurement Specialties has low cost production
centers in Mexico and China. These highly efficient
plants provide additional capacity and flexibility,
allowing us to schedule production globally and
ramp up to meet fast-track delivery requirements.
Responsive Engineering
& Customer Service
World Class Quality
We understand the need for speed in today’s fast
paced product development world. Our talented
engineers can modify an existing sensor product or
design a completely new solution within a timeline
that meets your requirements. Following a production
release, our customer service group will work with you
for complete global logistic support, including schedule
sharing programs.
Measurement Specialties’ products are ISO 9001:2008
certified and adhere to world class manufacturing
techniques to ensure each customer receives the
reliability they demand. This commitment to quality
has produced a reputation for dependability and
resulted in preferred supplier status at many of
the world’s leading OEMs.
Precision Sensors
Precision Inertial
Products Operations
Precision Position
Sensors Operations
Advanced Thermal
Products Operations
Selection Guide
2236 N. Cleveland-Massillon Road
Akron, Ohio 44333
Phone: 330-659-3312
Fax:
330-659-3286
424 Crown Point Circle
Grass Valley, California 95945
Phone: 530-273-4608
Fax:
530-273-0769
1028 Graphite Road
St. Marys, Pennsylvania 15857
Phone: 814-834-1541
Fax:
814-834-1556
Precision Inertial Products • Precision Position Sensors & Input Controls
Precision Temperature Sensors & Heater Assemblies
Spectrum Sensors
Headquarters
Global Operations
CERTIFIED
EUROPE
Schwabach, Germany
8061 Avonia Road
Fairview, Pennsylvania 16415
Phone: 814-474-2484
Fax:
814-474-2485
(Position Sensors)
CHINA
Dong Guan City, Guang Dong Province
Measurement Specialties offers a diverse family of position, temperature and inertial
measurement sensors that can be custom designed or modified for your application
and delivered in the industry’s shortest lead times. Complementing our flexible approach
to finding the ideal sensing or heating solution for your design are our low cost
manufacturing facilities and global logistics … adding up to the most cost effective,
high performance sensors available today!
Precision Sensor Applications
Precision Inertial Products & Systems
API Technologies, a publicly traded company (NASDAQ: ATNY), designs, develops and
manufactures electronic systems, subsystems, RF and secure solutions for technically
demanding applications in the defense, aerospace and commercial industries.
www.apitech.com
An industry leader in precision sensors for position,
temperature and inertial measurement
CERTIFIED
MEXICO
Juarez, Mexico
About API Technologies Corporation:
CERTIFIED
Precision Sensors
• Military & Aerospace - weapons research/development and testing, stores separation and captive
carry testing, air refueling drogues, helicopter cockpit instrumentation, training metrics, HUMS for
aircraft PM
• Alternative Energy - wind turbine sway and safety systems, condition monitoring of wind turbines,
offshore platform movement
• Transportation - automobile dynamics, railway monitoring (vibration, braking and acceleration),
commercial shipping
• Off-Highway Equipment - compacting machine movement, pile driver hammer position
• Commercial/Industrial - machine vibration, robotic movements, pipeline inspection, building monitors,
bridge/dam structural analysis, seismic activity
Precision Position Sensors & Input Controls
RF Solutions (RFS)
Systems &
Subsystems
Solutions
• RF & Microwave Filters
• Microwave Components
• IMAs
• Frequency Sources
• Integrated Solutions
• Coaxial Filters & Interconnects
• Power Filters
• Film Capacitors
• Specialty Connectors
• Antennas
• Advanced Ceramics
• Sensors & Measurement
• Components & Subsystems
• MIL-STD-1553
• Custom Hybrids
• Engineered Systems
• Engineering Services
• Power Solutions
• AC-AC Converters
• DC-DC Converters
• Custom Power Supplies
Electronics
Manufacturing
Services (EMS)
• New Product Introduction
(NPI) & Rapid Prototyping
• Electronics Manufacturing
• Substrate Manufacturing
• Mechanical Production
• Design Engineering (DfM)
• Integration & Testing
• Inertial Systems
• Position Sensors
• Temperature Sensors
AHA
4/12
10M
27-0183-0002
©2012 API Technologies Corp.
Printed in U.S.A.
Secure Systems
& Information
Assurance
Solutions (SSIA)
• Encryption
• Secure Access
• Information Assurance
• TEMPEST & Emanation
Security
• Military & Aerospace - aircraft cockpit instruments, fuel and throttle controls, angle of attack controls,
missile fin actuators, weapons guidance controls, stall warning, remote piloted vehicle actuation, turret
and brake pedal vehicle controls, gun elevation and steering controls, vehicle joysticks
• Medical - robot joint feedback, imaging equipment, prosthetics, physical therapy equipment,
endoscopy controls
• Off-Highway Vehicles - actuator controls, joystick controls, steering systems, diesel engine throttles,
diesel emissions systems
• Commercial/Industrial - camera positioning devices, process control valves, automation controls,
wind direction devices
Precision Temperature Sensors & Heater Assemblies
• Military & Aerospace - cabin and air inlet, engine fluids, brake systems, transmission/gear fluid,
fuel systems, climate controls, hydraulic systems, de-icing systems, on-board electronics, missile
guidance and launch, satellites, radar systems, and electronics
• Medical - imaging equipment, diagnostic and lab equipment, blood analyzers, anesthesia delivery,
medical storage, dialysis equipment, incubators
• Off-Highway Vehicles - climate control, diesel engine fluids, fuel systems, brake systems,
emissions control systems
• Commercial/Industrial - power management, appliance motors, gas detection and analysis
• Refrigeration - supermarket refrigeration systems and controls, walk-in coolers, defrost controls
• HVAC - chillers, heat pumps, PTACs, boilers, furnace, air handlers, zone controls
• Food & Beverage - soda and coffee dispensers, POS refrigerators, display coolers, heating elements,
galley products
• Pool & Spa - water heaters and sensors
Application - Specific Solutions
Often, a 100% off-the-shelf sensor will not meet the unique measurement and environmental demands found
in many OEM applications. Our experienced engineering teams are ready to develop a custom solution that
meets your specific requirements. Whether modifying an existing sensor design or working from a “clean sheet”
approach, the resulting Measurement Specialties sensor will be tailored to your exact requirements and push the
envelope of product performance.
A World of Precision,
High Reliability Applications
Flexible & Low Cost
Manufacturing Centers
For applications that require exacting performance
and the ability to withstand demanding environmental
conditions, turn to Measurement Specialties. We design,
manufacture and test our sensors to meet a variety
of IP or NEMA ratings, military standards and other
high reliability requirements, as well as general
commercial applications.
Measurement Specialties operates three manufacturing
sensor facilities in St. Marys, PA, Grass Valley, CA and
Akron, OH. These highly efficient plants provide
additional capacity and flexibility, allowing us to
schedule production globally and ramp up to meet
fast-track delivery requirements.
Responsive Engineering
& Customer Service
We understand the need for speed in today’s fast
paced product development world. Our talented
engineers can modify an existing sensor product or
design a completely new solution within a timeline
that meets your requirements. Following a production
release, our customer service group will work with you
for complete global logistic support, including schedule
sharing programs.
Precision Sensors
Selection Guide
Precision Inertial Products • Precision Position Sensors & Input Controls
Precision Temperature Sensors & Heater Assemblies
World Class Quality
Precision Sensors
An industry leader in precision sensors for position,
temperature and inertial measurement
Measurement Specialties offers a diverse family of position, temperature and inertial
measurement sensors that can be custom designed or modified for your application
and delivered in the industry’s shortest lead times. Complementing our flexible approach
to finding the ideal sensing or heating solution for your design are our low cost
manufacturing facilities and global logistics … adding up to the most cost effective,
high performance sensors available today!
Precision Sensor Applications
Measurement Specialties’ products are ISO 9001:2008
certified and adhere to world class manufacturing
techniques to ensure each customer receives the
reliability they demand. This commitment to quality
has produced a reputation for dependability and
resulted in preferred supplier status at many of
the world’s leading OEMs.
Precision Inertial Products & Systems
• Military & Aerospace - weapons research/development and testing, stores separation and captive
carry testing, air refueling drogues, helicopter cockpit instrumentation, training metrics, HUMS for
aircraft PM
• Alternative Energy - wind turbine sway and safety systems, condition monitoring of wind turbines,
offshore platform movement
• Transportation - automobile dynamics, railway monitoring (vibration, braking and acceleration),
commercial shipping
• Off-Highway Equipment - compacting machine movement, pile driver hammer position
• Commercial/Industrial - machine vibration, robotic movements, pipeline inspection, building monitors,
bridge/dam structural analysis, seismic activity
CERTIFIED
Precision Position Sensors & Input Controls
• Military & Aerospace - aircraft cockpit instruments, fuel and throttle controls, angle of attack controls,
missile fin actuators, weapons guidance controls, stall warning, remote piloted vehicle actuation, turret
and brake pedal vehicle controls, gun elevation and steering controls, vehicle joysticks
• Medical - robot joint feedback, imaging equipment, prosthetics, physical therapy equipment,
endoscopy controls
• Off-Highway Vehicles - actuator controls, joystick controls, steering systems, diesel engine throttles,
diesel emissions systems
• Commercial/Industrial - camera positioning devices, process control valves, automation controls,
wind direction devices
meas-spec.com
Precision Temperature Sensors & Heater Assemblies
Inertial Sensor Products
Position Sensor Products
Temperature Sensor Products
2236 N. Cleveland-Massillon Road
Akron, Ohio 44333
Phone: 330-659-3312
Fax:
330-659-3286
424 Crown Point Circle
Grass Valley, California 95945
Phone: 530-273-4608
Fax:
530-273-0769
1028 Graphite Road
St. Marys, Pennsylvania 15857
Phone: 814-834-1541
Fax:
814-834-1556
AHA
8/13
©2013 Measurement Specialties
Printed in U.S.A.
• Military & Aerospace - cabin and air inlet, engine fluids, brake systems, transmission/gear fluid,
fuel systems, climate controls, hydraulic systems, de-icing systems, on-board electronics, missile
guidance and launch, satellites, radar systems, and electronics
• Medical - imaging equipment, diagnostic and lab equipment, blood analyzers, anesthesia delivery,
medical storage, dialysis equipment, incubators
• Off-Highway Vehicles - climate control, diesel engine fluids, fuel systems, brake systems,
emissions control systems
• Commercial/Industrial - power management, appliance motors, gas detection and analysis
• Refrigeration - supermarket refrigeration systems and controls, walk-in coolers, defrost controls
• HVAC - chillers, heat pumps, PTACs, boilers, furnace, air handlers, zone controls
• Food & Beverage - soda and coffee dispensers, POS refrigerators, display coolers, heating elements,
galley products
• Pool & Spa - water heaters and sensors
Analog
Accelerometers
Inertial
Measurement
Systems
Rate
Gyros
Digital
Accelerometers
Resistive Element
Segment & Wiper
Assemblies
Rotary Precision
Potentiometers
• User configurable settings
• RS485 serial and analog outputs
• High accuracy and linearity
over wide temperature range
• True DC response with
bandwidth to 10 kHz available
• Fully calibrated to NIST
traceable standards, with built-in
calibration data
• Suitable for harsh environments
• Three-year factory warranty
• Complete units; no external
amplifiers, signal conditioners,
or digitizers required
to more than ±500 g
• Measurement range: Less than ±1 g
to more than ±500 g
• High accuracy and linearity over
wide temperature range
• Fully calibrated to NIST traceable
standards, with data
• IdentiCal™ interchangeable
uniaxial model
• Small size
• Choice of cables and PCB
termination option
• Suitable for harsh environments
• Three-year warranty
• Bandwidth: DC to 10 kHz, 20 kHz optionally
• Sensitivity: 20 mV/g to 1 V/g, can be
• Sensitivity: User configurable
normalized
• Sensitivity drift: As low as 0.1% over
temperature
• Offset drift: As low as 2 mg over
temperature
• Sensitivity drift: As low as 0.3% over
temperature
• Offset drift: As low as 20 mg over
temperature
• Non-linearity: As low as 0.1%
• Non-linearity: As low as 0.1%
• Noise density: As low as 110 µg/√Hz
• Noise density: As low as 10 µg/√Hz
• Output (analog): 0-5 VDC unipolar,
• Output: 0-5 VDC unipolar,
bipolar to ±10 V
• Measurement range: Less than
±50°/sec to more than ±20,000°/sec
• Bandwidth: DC to 10 kHz, 20 kHz optionally
bipolar to ±10 V
• Power supply: 8-30 VDC typical
• Power supply: 8-30 VDC typical
• Completely self-contained;
no need for external power source
• Easy to use, install, and configure
• User-programmable settings
• Can be set up in 20 minutes or less
• IRIG-106 compliant wireless
telemetry transmitters available
• Free ICU software for instrument
configuration and TMATS file
generation
• Extended model (65210E)
accommodates external inputs
• Bandwidth: 50 Hz / 100 Hz standard to
2.5 kHz optionally
• Sensitivity: As high as 27.5 mV/°/sec,
can be normalized
• Sensitivity drift: As low as 1% over
Inertial measurement products combine
an analog accelerometer (linear motion)
and a triaxial rate gyro (rotation or angular
motion) to determine the Six Degrees of
Freedom (6-DOF).
Possible electrical specifications for an IMS
can be found in the Analog Accelerometers
and Rate Gyros columns to the left.
• Number of axes: 1 to 3
• Mass (min): 35 grams
• Mass (min): 78 grams
• Mass (min): 35 grams
• Cable options: Commercial & MIL
• Connector options: User selectable
• Operating temp: -40°C to +85°C typical
• Operating temp: -40°C to +85°C typical
• Operating temp: -40°C to +85°C typical
• Calibration: NIST, temperature
• Calibration: NIST, temperature
• Calibration: NIST, temperature
• Product testing: To rigorous internal
standards
• Shock survivability: 5,000 g
compensation
• Product testing: Rigorous internal
standards plus DO-160
• Shock survivability: 4,000 g
• Product testing: Rigorous internal
standards plus EMC, climatic, corrosive,
shock/vibration, lubricants, enclosure
• Shock survivability: 10,000 g
• Material: Rugged aluminum housing
•
•
•
•
•
•
•
•
Less space
Smooth motor operation
Greater reliability
Infinite resolution
No coupling
Longest life
With/without gear heads
Best output smoothness
•
•
•
•
Lead wires, lead lengths and terminations
HR370 high TG printed circuit board
JST and molex terminals/connectors
Special linearities, such as electrical
function and various angles
• Special shaft configurations (screwdriver,
slotted, thru-hole, and custom flats)
• Special flange mounting configurations
• Special gear and mounting frame
configurations
Specifications
• Resistance: 1, 2, 5, 10 & 20 KΩ, std. ±10%
• Electrical angle: 325° - 350°
• Electrical length: 0.500" - 4.000"
• Linearity: ±0.5%; special ±0.25%
• Linearity: ±0.5%; special ±0.1%
• Linearity: ±1.0%; special ±0.25%
• Electrical angle: 325° - 355°
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Linearity: ±0.5%; special ±0.1%
• Linearity: ±0.5%; special ±0.1%
• Linearity (dual output): ±0.2% absolute
• Resistance temperature coefficient:
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Resistance temperature coefficient:
• Resistance temperature
coefficient: ±400 PPM/°C max.
•
•
•
•
• Resistance temperature coefficient:
±400 PPM/°C max.
• Power rating @ 70°C: 1.0 to 2.0 Watts
• Resistance temperature coefficient:
±400 PPM/°C max.
• Power rating @ 70°C: 0.5 to 2.0 Watts
±500 PPM/°C max.
• Power rating @ 70°C: 1.0 Watt/stroke inch
• Resistance: 1, 2, 5, 10 & 20 KΩ,
std. ±10%
±400 PPM/°C max.
• Dielectric strength: 500 - 1000 VRMS
• Dielectric strength: 500 - 1000 VRMS
• Dielectric strength: 1000 VRMS
• Power rating @ 70°C: 0.5 to 2.0 Watts
• Insulation resistance: 100 MΩ min.
• Insulation resistance: 100 MΩ min.
• Insulation resistance: 100 MΩ min.
• Dielectric strength: 500 - 1000 VRMS
• Insulation resistance: 100 MΩ min.
• Resistance: 1, 2, 5, 10 & 20 KΩ,
std. ±10%
• Electrical angle: 1° - 359°/Dead Zone: 1° - 359°
• Linearity (single output): ±0.1% absolute
• Power rating @ 70°C: 0.5 to
2.0 Watts
• Dielectric strength: 500 - 1000 VRMS
• Material: Rugged aluminum housing
• Heavy duty & lightweight designs
• Custom solutions for specific
measurement or protection
requirements
• Surface, immersion, and air
temperature sensing
• Utilize variety of sensing elements:
NTC & PTC thermistors, RTDs, ICs
& digital sensors
• Quick response & excellent
thermal tracking
• Wide operating temperature
ranges -80°C to +500°C
• Testing to 10,000 freeze/thaw cycles
at 25°C; ±0.3% over full temperature range
• Electrical angle: 325° - 350°
Mechanical Specifications
• Element O.D.: 0.702", 0.888", 1.252",
1.805" dia.
• Element I.D.: 0.186", 0.435" dia.
at 25°C; ±0.4% over full temperature range
Tracking (dual output): ±0.3%
Power rating @ 25°C: 0.080 W, max.
Resolution: 12 bit/14 bit serial
Sampling rate: 600 μs standard; 200 μs
digital high speed
• Nominal supply voltage (Vdd): 4.5 - 5.5V
• Nominal supply voltage (Idd): 8.5 mA 11 mA standard; 13.5 mA - 16 mA digital
• Housing: 0.500", 0.625", 0.875",
1.062", 1.437" (dia)
• Shaft diameter: 0.125" - 0.250"
Output Options
• Housing: 0.312, 0.500" (dia)
• Housing: 0.875", 1.062", 1.437" (dia)
• Shaft diameter: 0.078" - 0.125"
• Shaft diameter: Specify (ID/flat/other)
• Torque, actuation force: 20g, nominal
• Torque, start: 0.20 - 0.50 oz-in
• Torque start: 0.20 - 0.50 oz-in
• Housing: 0.625", 0.875", 1.062",
1.437" (dia)
• Shaft diameter: Specify
•
•
•
•
a total of 16 measurement channels
Axis alignment: Precision
Size (min): Per customer
requirements
Cable options: Wireless or
commercial & MIL standard
Connector options: User selectable
• Torque, running: 0.15 - 0.40 oz-in
• Aerospace - sealed: <2.0 oz-in.
• Commercial - unsealed: < 0.05 oz-in.
• Rotational life: > 100 million revolutions (std.
Environmental Specifications
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -55°C to +125°C
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 10 million stroke, min.
Material Specifications
• Operating temp: Specified by battery
• Calibration: NIST, temperature
compensation
• Product testing: To rigorous internal
standards
• Shock survivability: Specified by
transmitter
• Element: Co-molded conductive plastic
flush circuit
• Element: Co-molded conductive
plastic flush circuit
plastic flush circuit
• Element: Co-molded conductive
plastic flush circuit
• Element: Co-molded conductive
plastic flush circuit
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 8" length, min
• Lead wires: 28 AWG Teflon® -
• Mounting options: Epoxy O.D.
• Cover & Housing: Anodized aluminum
• Housing & Shaft: Stainless steel
• Housing: Anodized aluminum/thermo plastic
• Shaft: Stainless steel
• Solder terminals: Gold plated
• Material: Rugged aluminum housing
• Element: Co-molded conductive
• Mounting options: Servo/bushing
• Mounting options: T-clamps; custom options
• Analog - Ratiometric: Rail to rail/ 4-20mA
• Digital - PWM: 500 Hz (100 - 1,000 Hz available)
• Digital - Serial: 3 wire protocol (14 bit resolution)
Torque - Starting/Running
• Torque, running: 0.15 - 0.40 oz-in
• Number of axes: 6 internal with
Material Specifications
• Material: Rugged aluminum housing
Less space (flat pak)
Smooth motor installation
Infinite resolution
Longest life
No wiper installation/phasing
Best output smoothness
With/without connectors
Three section redundancy available
Heavy Duty Hi-Rel
Temperature Probes
& Assemblies
NTC
Thermistors
PTC
Thermistors
PTC Sensing
Elements
Heater
Assemblies
8" length, min
• Cover & Shaft: Stainless steel/thermo plastic
• Housing: Anodized aluminum
• Mounting options: Custom
• Shaft: Stainless steel
• Mounting options: Custom
bearing life, custom available)
• Electrical life: > 2,500 hours at 150°C
• Operating temp: -40°C to +125°C (150°C opt.) *
• Mechanical shock: Sawtooth 20G peak
• Vibration: High frequency, swept 3 - 2,000 Hz,
30G peak
• Magnetic field emission: At 30 CM,
less than 1° effect on compass
• EMI immunity: 120 A-m magnetic field and
5,400 V-m electric field
• RF emissions: Zero emission, swept 0.15 MHz 6,000 MHz
• Bearings: Precision miniature ball
• Mechanical OD: 0.500"/0.875"
• Shaft diameter: 0.125"
* Exposure to maximum rated conditions for
extended periods may affect device reliability
• Ideal for military, aerospace,
and medical applications
• Wide variety of precision NTC thermistor
curves available
• High stability, high accuracy 100Ω
and 1,000Ω platinum
• RTDs available
• Precision machined housing of stainless
steel, brass, aluminum, inconel and
other materials
• Operating temperatures from -50°C
to +500°C
• Special moisture and freeze/thaw
resistant designs available
• Customized to meet your exact sensing
requirements
• Various thermistor styles & surge
current limiters
• Rugged design & construction
• Very fast response times to
1.38MΩ for sensing thermistors
• Resistance values from 0.5Ω to
220Ω for Surge-Gard thermistors
• Operation from -50°C to +300°C
• High sensitivity to changes in
temperature
• High temperature stability
• Excellent long-term stability
• Platinum & nickel RTD elements
• -60°C to +250°C operation
for nickel
• -200°C to +600°C operation
for platinum
• Values from 100Ω to 1,000Ω
• Small size, fast response time
• Resistant to vibration and
thermal shock
• Available in standard DIN class
accuracies
• Ceramic PTC thermistors
• Over-current protection, motor
protection sensor & heater
applications
• No thermostat needed
• Virtually unlimited life
• Fast switching
• Rugged designs available
• Efficient operation
• Rapid response to changes
in temperature
• Custom designs and value
added assemblies
• Precision heating for a variety
of applications and markets
• Variety of heating elements
• Custom designs for a range
of temperatures
• Wide range of sizes, wattages
and styles
• Can be packaged with integral
sensors and other options
Styles
Heating Elements
Product Specifications
Sensors
NTC thermistors
RTDs, Pt100, Pt1000
Silicon PTC
IC temperature sensors
Digital temperature sensors
Ceramic PTC thermistors
standard, PVC and Teflon
compensation
•
•
•
•
•
•
•
•
• Insulation resistance: 100 MΩ min.
Environmental Specifications
compensation
Less space (0.312” & 0.500" dia. sizes)
Best output smoothness
Greater reliability
Various stroke lengths
Infinite resolution
Various mounting options
Longest life
Various shaft-end options
• Resistance: 1, 2, 5, 10 & 20 KΩ, std. ±10%
• Torque, running: 0.15 - 0.40 oz-in
• Size (min): Less than one cubic inch
standard, PVC and Teflon
•
•
•
•
•
•
•
•
• Electrical angle: 325° - 350°
• Output: 0-5 VDC unipolar, bipolar to ±10 V
• Size (min): Less than one cubic inch
• Connector options: User selectable
Special linearities option
Greater reliability
Mechanical stops option
Infinite resolution
Longest life
Best output smoothness
Various non-linear tapers, taps,
multi-sections, electrical angles,
special total resistance
• Resistance: 1, 2, 5, 10 & 20 KΩ, std.
• Torque, start: 0.20 - 0.50 oz-in
• Size (min): Less than one cubic inch
standard, PVC and Teflon
Temperature Sensing
Probes & Assemblies
Features
Electrical Specifications
• Noise density: As low as 0.01°/s/√Hz
• Axis alignment: Standard
• Connector options: User selectable
•
•
•
•
•
•
•
• Non-linearity: ±0.1% FSR
• Axis alignment: Standard or precision
• Cable options: Commercial & MIL
Hall Effect
Position Sensors
temperature
• Axis alignment: Standard or precision
• Cable options: Commercial & MIL
DIY kits
Best output smoothness
Less space (0.702" dia. sizes)
0.187" working height
Greater reliability
Linear elements available
Infinite resolution
Longest life
• Offset drift: As low as 0.5°/sec over
• Power supply: 8-30 VDC typical
• Number of axes: 1 to 3
•
•
•
•
•
•
•
•
temperature
Mechanical Specifications
• Number of axes: 1 to 3
Motorized
Potentiometers
Features
Electrical Specifications
• Measurement range: Less than ±1 g
Hollow Shaft
Precision
Potentiometers
Linear Precision
Potentiometers
Features
• Rugged, reliable performance
• High accuracy and linearity over
wide temperature range
• Precision alignment on most
triaxial models
• Calibration certificate
• Self-test on digital command
• Built-in power supply regulation
• Suitable for harsh environments
• Wide bandwidth available
• IdentiCal™ interchangeable
uniaxial analog accelerometer
• Three-year warranty
Precision Temperature Sensors & Heater Assemblies
Precision Position Sensors & Input Controls
Precision Inertial Products & Systems
Styles
Immersion – threaded stainless, copper,
brass, plastic
Surface – ring terminal, rectangular,
with mounting holes, clip-ons
Air/general purpose – flange mount, various
materials, molded, plastic
Other Specifications
Special designs for moisture resistance/
freeze-thaw applications
Serving a wide range of markets and
applications
Broad range of wire types and styles
Various connector systems
Sensors
NTC thermistors, interchangeable
accuracies to ±0.1°C
RTDs, Pt100, Pt1000
Silicon PTC
IC temperature sensors
Digital temperature sensors
Ceramic PTC thermistors
Styles
Immersion – threaded stainless, copper,
brass, plastic
Surface – ring terminal, rectangular,
with mounting holes, clip-ons
Air/general purpose – flange mount,
various materials, molded, plastic
Other Specifications
Special test capabilities for RCA DO-160D,
MIL-T-23648
Styles
Silicon PTC elements
Epoxy coated disc or chip
PTC motor protection sensors
Precision interchangeables
PTC over-temperature protectors
Axial glass encapsulated (DO-35 pkg)
RTD elements
Radial glass encapsulated
SMD (1206 / 0805 palladium silver) –
(0603 / 0805 nickel barrier)
Electrical
Steady state currents up to 36 amps
Resistance values from 0.5Ω
to 1.38MΩ
Beta values from 3000 to 4850
Resistance tolerances from 20% to 1%
Accuracies of ±1.0°C to ±0.1°C or better
Mechanical
Sizes from .051" max diameter over 1.25"
Design and application assistance from
an experienced engineering group
Time constant down to 6 sec
Broad range of wire types and styles
Inside and outside kink configurations
for Surge-Gard line
Various connector systems
Types
Surge-Gard (in rush current limiter)
Custom configurations available
Silicon PTC Elements
DO7 glass encapsulation
Molded epoxy encapsulation
Radial and axial leads and SMD
MIL approved series
Glass/hermetically sealed, MIL-T-23648/19
Molded type, MIL-T-23648/9
Motor Temperature Series
Disc, chip, rectangular, cylindrical
and other shapes
Coated or uncoated
Switchpoints from 50°C to 180°C
Voltage ratings from 5V to 400V
Applications
Self-regulating heating elements
Overcurrent protectors
Over-temperature protection
Motor protection sensors
Motor starting
Constant current
Rugged designs with Teflon insulated leads
Liquid level/air flow
Switch temperatures from 50ºC to 150ºC
Other Specifications
Custom designs
Over-temperature Protectors
Self-regulating PTC thermistor elements –
range of voltage ratings, switch
temperatures and wattages
Cartridge heating elements
Kapton, silicone rubber and mica heaters
Flexible thermofoil heaters
Integral Sensors
NTC thermistor elements with a range
of values and curves
Platinum and nickel RTD elements
Bimetal thermostats
Integrated thermal fuse
Other Specifications
Size and shape of assembly
With extension leads and connectors
Insulation materials and isolation
specifications
Packaged heating elements
Electrical terminations
Power transistors, heat sinks, chassis, etc
Aluminum mounting tab, hole for #6 stud
Switch temperatures from 40ºC to 120ºC
RTD Elements
Platinum and nickel elements
Wide operating temperature ranges
meas-spec.com
Analog
Accelerometers
Inertial
Measurement
Systems
Rate
Gyros
Digital
Accelerometers
Resistive Element
Segment & Wiper
Assemblies
Rotary Precision
Potentiometers
• User configurable settings
• RS485 serial and analog outputs
• High accuracy and linearity
over wide temperature range
• True DC response with
bandwidth to 10 kHz available
• Fully calibrated to NIST
traceable standards, with built-in
calibration data
• Suitable for harsh environments
• Three-year factory warranty
• Complete units; no external
amplifiers, signal conditioners,
or digitizers required
to more than ±500 g
• Measurement range: Less than ±1 g
to more than ±500 g
• High accuracy and linearity over
wide temperature range
• Fully calibrated to NIST traceable
standards, with data
• IdentiCal™ interchangeable
uniaxial model
• Small size
• Choice of cables and PCB
termination option
• Suitable for harsh environments
• Three-year warranty
• Bandwidth: DC to 10 kHz, 20 kHz optionally
• Sensitivity: 20 mV/g to 1 V/g, can be
• Sensitivity: User configurable
normalized
• Sensitivity drift: As low as 0.1% over
temperature
• Offset drift: As low as 2 mg over
temperature
• Sensitivity drift: As low as 0.3% over
temperature
• Offset drift: As low as 20 mg over
temperature
• Non-linearity: As low as 0.1%
• Non-linearity: As low as 0.1%
• Noise density: As low as 110 µg/√Hz
• Noise density: As low as 10 µg/√Hz
• Output (analog): 0-5 VDC unipolar,
• Output: 0-5 VDC unipolar,
bipolar to ±10 V
• Measurement range: Less than
±50°/sec to more than ±20,000°/sec
• Bandwidth: DC to 10 kHz, 20 kHz optionally
bipolar to ±10 V
• Power supply: 8-30 VDC typical
• Power supply: 8-30 VDC typical
• Completely self-contained;
no need for external power source
• Easy to use, install, and configure
• User-programmable settings
• Can be set up in 20 minutes or less
• IRIG-106 compliant wireless
telemetry transmitters available
• Free ICU software for instrument
configuration and TMATS file
generation
• Extended model (65210E)
accommodates external inputs
• Bandwidth: 50 Hz / 100 Hz standard to
2.5 kHz optionally
• Sensitivity: As high as 27.5 mV/°/sec,
can be normalized
• Sensitivity drift: As low as 1% over
Inertial measurement products combine
an analog accelerometer (linear motion)
and a triaxial rate gyro (rotation or angular
motion) to determine the Six Degrees of
Freedom (6-DOF).
Possible electrical specifications for an IMS
can be found in the Analog Accelerometers
and Rate Gyros columns to the left.
• Number of axes: 1 to 3
• Mass (min): 35 grams
• Mass (min): 78 grams
• Mass (min): 35 grams
• Cable options: Commercial & MIL
• Connector options: User selectable
• Operating temp: -40°C to +85°C typical
• Operating temp: -40°C to +85°C typical
• Operating temp: -40°C to +85°C typical
• Calibration: NIST, temperature
• Calibration: NIST, temperature
• Calibration: NIST, temperature
• Product testing: To rigorous internal
standards
• Shock survivability: 5,000 g
compensation
• Product testing: Rigorous internal
standards plus DO-160
• Shock survivability: 4,000 g
• Product testing: Rigorous internal
standards plus EMC, climatic, corrosive,
shock/vibration, lubricants, enclosure
• Shock survivability: 10,000 g
• Material: Rugged aluminum housing
•
•
•
•
•
•
•
•
Less space
Smooth motor operation
Greater reliability
Infinite resolution
No coupling
Longest life
With/without gear heads
Best output smoothness
•
•
•
•
Lead wires, lead lengths and terminations
HR370 high TG printed circuit board
JST and molex terminals/connectors
Special linearities, such as electrical
function and various angles
• Special shaft configurations (screwdriver,
slotted, thru-hole, and custom flats)
• Special flange mounting configurations
• Special gear and mounting frame
configurations
Specifications
• Resistance: 1, 2, 5, 10 & 20 KΩ, std. ±10%
• Electrical angle: 325° - 350°
• Electrical length: 0.500" - 4.000"
• Linearity: ±0.5%; special ±0.25%
• Linearity: ±0.5%; special ±0.1%
• Linearity: ±1.0%; special ±0.25%
• Electrical angle: 325° - 355°
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Linearity: ±0.5%; special ±0.1%
• Linearity: ±0.5%; special ±0.1%
• Linearity (dual output): ±0.2% absolute
• Resistance temperature coefficient:
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Resistance temperature coefficient:
• Resistance temperature
coefficient: ±400 PPM/°C max.
•
•
•
•
• Resistance temperature coefficient:
±400 PPM/°C max.
• Power rating @ 70°C: 1.0 to 2.0 Watts
• Resistance temperature coefficient:
±400 PPM/°C max.
• Power rating @ 70°C: 0.5 to 2.0 Watts
±500 PPM/°C max.
• Power rating @ 70°C: 1.0 Watt/stroke inch
• Resistance: 1, 2, 5, 10 & 20 KΩ,
std. ±10%
±400 PPM/°C max.
• Dielectric strength: 500 - 1000 VRMS
• Dielectric strength: 500 - 1000 VRMS
• Dielectric strength: 1000 VRMS
• Power rating @ 70°C: 0.5 to 2.0 Watts
• Insulation resistance: 100 MΩ min.
• Insulation resistance: 100 MΩ min.
• Insulation resistance: 100 MΩ min.
• Dielectric strength: 500 - 1000 VRMS
• Insulation resistance: 100 MΩ min.
• Resistance: 1, 2, 5, 10 & 20 KΩ,
std. ±10%
• Electrical angle: 1° - 359°/Dead Zone: 1° - 359°
• Linearity (single output): ±0.1% absolute
• Power rating @ 70°C: 0.5 to
2.0 Watts
• Dielectric strength: 500 - 1000 VRMS
• Material: Rugged aluminum housing
• Heavy duty & lightweight designs
• Custom solutions for specific
measurement or protection
requirements
• Surface, immersion, and air
temperature sensing
• Utilize variety of sensing elements:
NTC & PTC thermistors, RTDs, ICs
& digital sensors
• Quick response & excellent
thermal tracking
• Wide operating temperature
ranges -80°C to +500°C
• Testing to 10,000 freeze/thaw cycles
at 25°C; ±0.3% over full temperature range
• Electrical angle: 325° - 350°
Mechanical Specifications
• Element O.D.: 0.702", 0.888", 1.252",
1.805" dia.
• Element I.D.: 0.186", 0.435" dia.
at 25°C; ±0.4% over full temperature range
Tracking (dual output): ±0.3%
Power rating @ 25°C: 0.080 W, max.
Resolution: 12 bit/14 bit serial
Sampling rate: 600 μs standard; 200 μs
digital high speed
• Nominal supply voltage (Vdd): 4.5 - 5.5V
• Nominal supply voltage (Idd): 8.5 mA 11 mA standard; 13.5 mA - 16 mA digital
• Housing: 0.500", 0.625", 0.875",
1.062", 1.437" (dia)
• Shaft diameter: 0.125" - 0.250"
Output Options
• Housing: 0.312, 0.500" (dia)
• Housing: 0.875", 1.062", 1.437" (dia)
• Shaft diameter: 0.078" - 0.125"
• Shaft diameter: Specify (ID/flat/other)
• Torque, actuation force: 20g, nominal
• Torque, start: 0.20 - 0.50 oz-in
• Torque start: 0.20 - 0.50 oz-in
• Housing: 0.625", 0.875", 1.062",
1.437" (dia)
• Shaft diameter: Specify
•
•
•
•
a total of 16 measurement channels
Axis alignment: Precision
Size (min): Per customer
requirements
Cable options: Wireless or
commercial & MIL standard
Connector options: User selectable
• Torque, running: 0.15 - 0.40 oz-in
• Aerospace - sealed: <2.0 oz-in.
• Commercial - unsealed: < 0.05 oz-in.
• Rotational life: > 100 million revolutions (std.
Environmental Specifications
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -55°C to +125°C
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 10 million stroke, min.
Material Specifications
• Operating temp: Specified by battery
• Calibration: NIST, temperature
compensation
• Product testing: To rigorous internal
standards
• Shock survivability: Specified by
transmitter
• Element: Co-molded conductive plastic
flush circuit
• Element: Co-molded conductive
plastic flush circuit
plastic flush circuit
• Element: Co-molded conductive
plastic flush circuit
• Element: Co-molded conductive
plastic flush circuit
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 8" length, min
• Lead wires: 28 AWG Teflon® -
• Mounting options: Epoxy O.D.
• Cover & Housing: Anodized aluminum
• Housing & Shaft: Stainless steel
• Housing: Anodized aluminum/thermo plastic
• Shaft: Stainless steel
• Solder terminals: Gold plated
• Material: Rugged aluminum housing
• Element: Co-molded conductive
• Mounting options: Servo/bushing
• Mounting options: T-clamps; custom options
• Analog - Ratiometric: Rail to rail/ 4-20mA
• Digital - PWM: 500 Hz (100 - 1,000 Hz available)
• Digital - Serial: 3 wire protocol (14 bit resolution)
Torque - Starting/Running
• Torque, running: 0.15 - 0.40 oz-in
• Number of axes: 6 internal with
Material Specifications
• Material: Rugged aluminum housing
Less space (flat pak)
Smooth motor installation
Infinite resolution
Longest life
No wiper installation/phasing
Best output smoothness
With/without connectors
Three section redundancy available
Heavy Duty Hi-Rel
Temperature Probes
& Assemblies
NTC
Thermistors
PTC
Thermistors
PTC Sensing
Elements
Heater
Assemblies
8" length, min
• Cover & Shaft: Stainless steel/thermo plastic
• Housing: Anodized aluminum
• Mounting options: Custom
• Shaft: Stainless steel
• Mounting options: Custom
bearing life, custom available)
• Electrical life: > 2,500 hours at 150°C
• Operating temp: -40°C to +125°C (150°C opt.) *
• Mechanical shock: Sawtooth 20G peak
• Vibration: High frequency, swept 3 - 2,000 Hz,
30G peak
• Magnetic field emission: At 30 CM,
less than 1° effect on compass
• EMI immunity: 120 A-m magnetic field and
5,400 V-m electric field
• RF emissions: Zero emission, swept 0.15 MHz 6,000 MHz
• Bearings: Precision miniature ball
• Mechanical OD: 0.500"/0.875"
• Shaft diameter: 0.125"
* Exposure to maximum rated conditions for
extended periods may affect device reliability
• Ideal for military, aerospace,
and medical applications
• Wide variety of precision NTC thermistor
curves available
• High stability, high accuracy 100Ω
and 1,000Ω platinum
• RTDs available
• Precision machined housing of stainless
steel, brass, aluminum, inconel and
other materials
• Operating temperatures from -50°C
to +500°C
• Special moisture and freeze/thaw
resistant designs available
• Customized to meet your exact sensing
requirements
• Various thermistor styles & surge
current limiters
• Rugged design & construction
• Very fast response times to
1.38MΩ for sensing thermistors
• Resistance values from 0.5Ω to
220Ω for Surge-Gard thermistors
• Operation from -50°C to +300°C
• High sensitivity to changes in
temperature
• High temperature stability
• Excellent long-term stability
• Platinum & nickel RTD elements
• -60°C to +250°C operation
for nickel
• -200°C to +600°C operation
for platinum
• Values from 100Ω to 1,000Ω
• Small size, fast response time
• Resistant to vibration and
thermal shock
• Available in standard DIN class
accuracies
• Ceramic PTC thermistors
• Over-current protection, motor
protection sensor & heater
applications
• No thermostat needed
• Virtually unlimited life
• Fast switching
• Rugged designs available
• Efficient operation
• Rapid response to changes
in temperature
• Custom designs and value
added assemblies
• Precision heating for a variety
of applications and markets
• Variety of heating elements
• Custom designs for a range
of temperatures
• Wide range of sizes, wattages
and styles
• Can be packaged with integral
sensors and other options
Styles
Heating Elements
Product Specifications
Sensors
NTC thermistors
RTDs, Pt100, Pt1000
Silicon PTC
IC temperature sensors
Digital temperature sensors
Ceramic PTC thermistors
standard, PVC and Teflon
compensation
•
•
•
•
•
•
•
•
• Insulation resistance: 100 MΩ min.
Environmental Specifications
compensation
Less space (0.312” & 0.500" dia. sizes)
Best output smoothness
Greater reliability
Various stroke lengths
Infinite resolution
Various mounting options
Longest life
Various shaft-end options
• Resistance: 1, 2, 5, 10 & 20 KΩ, std. ±10%
• Torque, running: 0.15 - 0.40 oz-in
• Size (min): Less than one cubic inch
standard, PVC and Teflon
•
•
•
•
•
•
•
•
• Electrical angle: 325° - 350°
• Output: 0-5 VDC unipolar, bipolar to ±10 V
• Size (min): Less than one cubic inch
• Connector options: User selectable
Special linearities option
Greater reliability
Mechanical stops option
Infinite resolution
Longest life
Best output smoothness
Various non-linear tapers, taps,
multi-sections, electrical angles,
special total resistance
• Resistance: 1, 2, 5, 10 & 20 KΩ, std.
• Torque, start: 0.20 - 0.50 oz-in
• Size (min): Less than one cubic inch
standard, PVC and Teflon
Temperature Sensing
Probes & Assemblies
Features
Electrical Specifications
• Noise density: As low as 0.01°/s/√Hz
• Axis alignment: Standard
• Connector options: User selectable
•
•
•
•
•
•
•
• Non-linearity: ±0.1% FSR
• Axis alignment: Standard or precision
• Cable options: Commercial & MIL
Hall Effect
Position Sensors
temperature
• Axis alignment: Standard or precision
• Cable options: Commercial & MIL
DIY kits
Best output smoothness
Less space (0.702" dia. sizes)
0.187" working height
Greater reliability
Linear elements available
Infinite resolution
Longest life
• Offset drift: As low as 0.5°/sec over
• Power supply: 8-30 VDC typical
• Number of axes: 1 to 3
•
•
•
•
•
•
•
•
temperature
Mechanical Specifications
• Number of axes: 1 to 3
Motorized
Potentiometers
Features
Electrical Specifications
• Measurement range: Less than ±1 g
Hollow Shaft
Precision
Potentiometers
Linear Precision
Potentiometers
Features
• Rugged, reliable performance
• High accuracy and linearity over
wide temperature range
• Precision alignment on most
triaxial models
• Calibration certificate
• Self-test on digital command
• Built-in power supply regulation
• Suitable for harsh environments
• Wide bandwidth available
• IdentiCal™ interchangeable
uniaxial analog accelerometer
• Three-year warranty
Precision Temperature Sensors & Heater Assemblies
Precision Position Sensors & Input Controls
Precision Inertial Products & Systems
Styles
Immersion – threaded stainless, copper,
brass, plastic
Surface – ring terminal, rectangular,
with mounting holes, clip-ons
Air/general purpose – flange mount, various
materials, molded, plastic
Other Specifications
Special designs for moisture resistance/
freeze-thaw applications
Serving a wide range of markets and
applications
Broad range of wire types and styles
Various connector systems
Sensors
NTC thermistors, interchangeable
accuracies to ±0.1°C
RTDs, Pt100, Pt1000
Silicon PTC
IC temperature sensors
Digital temperature sensors
Ceramic PTC thermistors
Styles
Immersion – threaded stainless, copper,
brass, plastic
Surface – ring terminal, rectangular,
with mounting holes, clip-ons
Air/general purpose – flange mount,
various materials, molded, plastic
Other Specifications
Special test capabilities for RCA DO-160D,
MIL-T-23648
Styles
Silicon PTC elements
Epoxy coated disc or chip
PTC motor protection sensors
Precision interchangeables
PTC over-temperature protectors
Axial glass encapsulated (DO-35 pkg)
RTD elements
Radial glass encapsulated
SMD (1206 / 0805 palladium silver) –
(0603 / 0805 nickel barrier)
Electrical
Steady state currents up to 36 amps
Resistance values from 0.5Ω
to 1.38MΩ
Beta values from 3000 to 4850
Resistance tolerances from 20% to 1%
Accuracies of ±1.0°C to ±0.1°C or better
Mechanical
Sizes from .051" max diameter over 1.25"
Design and application assistance from
an experienced engineering group
Time constant down to 6 sec
Broad range of wire types and styles
Inside and outside kink configurations
for Surge-Gard line
Various connector systems
Types
Surge-Gard (in rush current limiter)
Custom configurations available
Silicon PTC Elements
DO7 glass encapsulation
Molded epoxy encapsulation
Radial and axial leads and SMD
MIL approved series
Glass/hermetically sealed, MIL-T-23648/19
Molded type, MIL-T-23648/9
Motor Temperature Series
Disc, chip, rectangular, cylindrical
and other shapes
Coated or uncoated
Switchpoints from 50°C to 180°C
Voltage ratings from 5V to 400V
Applications
Self-regulating heating elements
Overcurrent protectors
Over-temperature protection
Motor protection sensors
Motor starting
Constant current
Rugged designs with Teflon insulated leads
Liquid level/air flow
Switch temperatures from 50ºC to 150ºC
Other Specifications
Custom designs
Over-temperature Protectors
Self-regulating PTC thermistor elements –
range of voltage ratings, switch
temperatures and wattages
Cartridge heating elements
Kapton, silicone rubber and mica heaters
Flexible thermofoil heaters
Integral Sensors
NTC thermistor elements with a range
of values and curves
Platinum and nickel RTD elements
Bimetal thermostats
Integrated thermal fuse
Other Specifications
Size and shape of assembly
With extension leads and connectors
Insulation materials and isolation
specifications
Packaged heating elements
Electrical terminations
Power transistors, heat sinks, chassis, etc
Aluminum mounting tab, hole for #6 stud
Switch temperatures from 40ºC to 120ºC
RTD Elements
Platinum and nickel elements
Wide operating temperature ranges
meas-spec.com
Analog
Accelerometers
Inertial
Measurement
Systems
Rate
Gyros
Digital
Accelerometers
Resistive Element
Segment & Wiper
Assemblies
Rotary Precision
Potentiometers
• User configurable settings
• RS485 serial and analog outputs
• High accuracy and linearity
over wide temperature range
• True DC response with
bandwidth to 10 kHz available
• Fully calibrated to NIST
traceable standards, with built-in
calibration data
• Suitable for harsh environments
• Three-year factory warranty
• Complete units; no external
amplifiers, signal conditioners,
or digitizers required
to more than ±500 g
• Measurement range: Less than ±1 g
to more than ±500 g
• High accuracy and linearity over
wide temperature range
• Fully calibrated to NIST traceable
standards, with data
• IdentiCal™ interchangeable
uniaxial model
• Small size
• Choice of cables and PCB
termination option
• Suitable for harsh environments
• Three-year warranty
• Bandwidth: DC to 10 kHz, 20 kHz optionally
• Sensitivity: 20 mV/g to 1 V/g, can be
• Sensitivity: User configurable
normalized
• Sensitivity drift: As low as 0.1% over
temperature
• Offset drift: As low as 2 mg over
temperature
• Sensitivity drift: As low as 0.3% over
temperature
• Offset drift: As low as 20 mg over
temperature
• Non-linearity: As low as 0.1%
• Non-linearity: As low as 0.1%
• Noise density: As low as 110 µg/√Hz
• Noise density: As low as 10 µg/√Hz
• Output (analog): 0-5 VDC unipolar,
• Output: 0-5 VDC unipolar,
bipolar to ±10 V
• Measurement range: Less than
±50°/sec to more than ±20,000°/sec
• Bandwidth: DC to 10 kHz, 20 kHz optionally
bipolar to ±10 V
• Power supply: 8-30 VDC typical
• Power supply: 8-30 VDC typical
• Completely self-contained;
no need for external power source
• Easy to use, install, and configure
• User-programmable settings
• Can be set up in 20 minutes or less
• IRIG-106 compliant wireless
telemetry transmitters available
• Free ICU software for instrument
configuration and TMATS file
generation
• Extended model (65210E)
accommodates external inputs
• Bandwidth: 50 Hz / 100 Hz standard to
2.5 kHz optionally
• Sensitivity: As high as 27.5 mV/°/sec,
can be normalized
• Sensitivity drift: As low as 1% over
Inertial measurement products combine
an analog accelerometer (linear motion)
and a triaxial rate gyro (rotation or angular
motion) to determine the Six Degrees of
Freedom (6-DOF).
Possible electrical specifications for an IMS
can be found in the Analog Accelerometers
and Rate Gyros columns to the left.
• Number of axes: 1 to 3
• Mass (min): 35 grams
• Mass (min): 78 grams
• Mass (min): 35 grams
• Cable options: Commercial & MIL
• Connector options: User selectable
• Operating temp: -40°C to +85°C typical
• Operating temp: -40°C to +85°C typical
• Operating temp: -40°C to +85°C typical
• Calibration: NIST, temperature
• Calibration: NIST, temperature
• Calibration: NIST, temperature
• Product testing: To rigorous internal
standards
• Shock survivability: 5,000 g
compensation
• Product testing: Rigorous internal
standards plus DO-160
• Shock survivability: 4,000 g
• Product testing: Rigorous internal
standards plus EMC, climatic, corrosive,
shock/vibration, lubricants, enclosure
• Shock survivability: 10,000 g
• Material: Rugged aluminum housing
•
•
•
•
•
•
•
•
Less space
Smooth motor operation
Greater reliability
Infinite resolution
No coupling
Longest life
With/without gear heads
Best output smoothness
•
•
•
•
Lead wires, lead lengths and terminations
HR370 high TG printed circuit board
JST and molex terminals/connectors
Special linearities, such as electrical
function and various angles
• Special shaft configurations (screwdriver,
slotted, thru-hole, and custom flats)
• Special flange mounting configurations
• Special gear and mounting frame
configurations
Specifications
• Resistance: 1, 2, 5, 10 & 20 KΩ, std. ±10%
• Electrical angle: 325° - 350°
• Electrical length: 0.500" - 4.000"
• Linearity: ±0.5%; special ±0.25%
• Linearity: ±0.5%; special ±0.1%
• Linearity: ±1.0%; special ±0.25%
• Electrical angle: 325° - 355°
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Linearity: ±0.5%; special ±0.1%
• Linearity: ±0.5%; special ±0.1%
• Linearity (dual output): ±0.2% absolute
• Resistance temperature coefficient:
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Resistance temperature coefficient:
• Resistance temperature
coefficient: ±400 PPM/°C max.
•
•
•
•
• Resistance temperature coefficient:
±400 PPM/°C max.
• Power rating @ 70°C: 1.0 to 2.0 Watts
• Resistance temperature coefficient:
±400 PPM/°C max.
• Power rating @ 70°C: 0.5 to 2.0 Watts
±500 PPM/°C max.
• Power rating @ 70°C: 1.0 Watt/stroke inch
• Resistance: 1, 2, 5, 10 & 20 KΩ,
std. ±10%
±400 PPM/°C max.
• Dielectric strength: 500 - 1000 VRMS
• Dielectric strength: 500 - 1000 VRMS
• Dielectric strength: 1000 VRMS
• Power rating @ 70°C: 0.5 to 2.0 Watts
• Insulation resistance: 100 MΩ min.
• Insulation resistance: 100 MΩ min.
• Insulation resistance: 100 MΩ min.
• Dielectric strength: 500 - 1000 VRMS
• Insulation resistance: 100 MΩ min.
• Resistance: 1, 2, 5, 10 & 20 KΩ,
std. ±10%
• Electrical angle: 1° - 359°/Dead Zone: 1° - 359°
• Linearity (single output): ±0.1% absolute
• Power rating @ 70°C: 0.5 to
2.0 Watts
• Dielectric strength: 500 - 1000 VRMS
• Material: Rugged aluminum housing
• Heavy duty & lightweight designs
• Custom solutions for specific
measurement or protection
requirements
• Surface, immersion, and air
temperature sensing
• Utilize variety of sensing elements:
NTC & PTC thermistors, RTDs, ICs
& digital sensors
• Quick response & excellent
thermal tracking
• Wide operating temperature
ranges -80°C to +500°C
• Testing to 10,000 freeze/thaw cycles
at 25°C; ±0.3% over full temperature range
• Electrical angle: 325° - 350°
Mechanical Specifications
• Element O.D.: 0.702", 0.888", 1.252",
1.805" dia.
• Element I.D.: 0.186", 0.435" dia.
at 25°C; ±0.4% over full temperature range
Tracking (dual output): ±0.3%
Power rating @ 25°C: 0.080 W, max.
Resolution: 12 bit/14 bit serial
Sampling rate: 600 μs standard; 200 μs
digital high speed
• Nominal supply voltage (Vdd): 4.5 - 5.5V
• Nominal supply voltage (Idd): 8.5 mA 11 mA standard; 13.5 mA - 16 mA digital
• Housing: 0.500", 0.625", 0.875",
1.062", 1.437" (dia)
• Shaft diameter: 0.125" - 0.250"
Output Options
• Housing: 0.312, 0.500" (dia)
• Housing: 0.875", 1.062", 1.437" (dia)
• Shaft diameter: 0.078" - 0.125"
• Shaft diameter: Specify (ID/flat/other)
• Torque, actuation force: 20g, nominal
• Torque, start: 0.20 - 0.50 oz-in
• Torque start: 0.20 - 0.50 oz-in
• Housing: 0.625", 0.875", 1.062",
1.437" (dia)
• Shaft diameter: Specify
•
•
•
•
a total of 16 measurement channels
Axis alignment: Precision
Size (min): Per customer
requirements
Cable options: Wireless or
commercial & MIL standard
Connector options: User selectable
• Torque, running: 0.15 - 0.40 oz-in
• Aerospace - sealed: <2.0 oz-in.
• Commercial - unsealed: < 0.05 oz-in.
• Rotational life: > 100 million revolutions (std.
Environmental Specifications
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -55°C to +125°C
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 10 million stroke, min.
Material Specifications
• Operating temp: Specified by battery
• Calibration: NIST, temperature
compensation
• Product testing: To rigorous internal
standards
• Shock survivability: Specified by
transmitter
• Element: Co-molded conductive plastic
flush circuit
• Element: Co-molded conductive
plastic flush circuit
plastic flush circuit
• Element: Co-molded conductive
plastic flush circuit
• Element: Co-molded conductive
plastic flush circuit
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 8" length, min
• Lead wires: 28 AWG Teflon® -
• Mounting options: Epoxy O.D.
• Cover & Housing: Anodized aluminum
• Housing & Shaft: Stainless steel
• Housing: Anodized aluminum/thermo plastic
• Shaft: Stainless steel
• Solder terminals: Gold plated
• Material: Rugged aluminum housing
• Element: Co-molded conductive
• Mounting options: Servo/bushing
• Mounting options: T-clamps; custom options
• Analog - Ratiometric: Rail to rail/ 4-20mA
• Digital - PWM: 500 Hz (100 - 1,000 Hz available)
• Digital - Serial: 3 wire protocol (14 bit resolution)
Torque - Starting/Running
• Torque, running: 0.15 - 0.40 oz-in
• Number of axes: 6 internal with
Material Specifications
• Material: Rugged aluminum housing
Less space (flat pak)
Smooth motor installation
Infinite resolution
Longest life
No wiper installation/phasing
Best output smoothness
With/without connectors
Three section redundancy available
Heavy Duty Hi-Rel
Temperature Probes
& Assemblies
NTC
Thermistors
PTC
Thermistors
PTC Sensing
Elements
Heater
Assemblies
8" length, min
• Cover & Shaft: Stainless steel/thermo plastic
• Housing: Anodized aluminum
• Mounting options: Custom
• Shaft: Stainless steel
• Mounting options: Custom
bearing life, custom available)
• Electrical life: > 2,500 hours at 150°C
• Operating temp: -40°C to +125°C (150°C opt.) *
• Mechanical shock: Sawtooth 20G peak
• Vibration: High frequency, swept 3 - 2,000 Hz,
30G peak
• Magnetic field emission: At 30 CM,
less than 1° effect on compass
• EMI immunity: 120 A-m magnetic field and
5,400 V-m electric field
• RF emissions: Zero emission, swept 0.15 MHz 6,000 MHz
• Bearings: Precision miniature ball
• Mechanical OD: 0.500"/0.875"
• Shaft diameter: 0.125"
* Exposure to maximum rated conditions for
extended periods may affect device reliability
• Ideal for military, aerospace,
and medical applications
• Wide variety of precision NTC thermistor
curves available
• High stability, high accuracy 100Ω
and 1,000Ω platinum
• RTDs available
• Precision machined housing of stainless
steel, brass, aluminum, inconel and
other materials
• Operating temperatures from -50°C
to +500°C
• Special moisture and freeze/thaw
resistant designs available
• Customized to meet your exact sensing
requirements
• Various thermistor styles & surge
current limiters
• Rugged design & construction
• Very fast response times to
1.38MΩ for sensing thermistors
• Resistance values from 0.5Ω to
220Ω for Surge-Gard thermistors
• Operation from -50°C to +300°C
• High sensitivity to changes in
temperature
• High temperature stability
• Excellent long-term stability
• Platinum & nickel RTD elements
• -60°C to +250°C operation
for nickel
• -200°C to +600°C operation
for platinum
• Values from 100Ω to 1,000Ω
• Small size, fast response time
• Resistant to vibration and
thermal shock
• Available in standard DIN class
accuracies
• Ceramic PTC thermistors
• Over-current protection, motor
protection sensor & heater
applications
• No thermostat needed
• Virtually unlimited life
• Fast switching
• Rugged designs available
• Efficient operation
• Rapid response to changes
in temperature
• Custom designs and value
added assemblies
• Precision heating for a variety
of applications and markets
• Variety of heating elements
• Custom designs for a range
of temperatures
• Wide range of sizes, wattages
and styles
• Can be packaged with integral
sensors and other options
Styles
Heating Elements
Product Specifications
Sensors
NTC thermistors
RTDs, Pt100, Pt1000
Silicon PTC
IC temperature sensors
Digital temperature sensors
Ceramic PTC thermistors
standard, PVC and Teflon
compensation
•
•
•
•
•
•
•
•
• Insulation resistance: 100 MΩ min.
Environmental Specifications
compensation
Less space (0.312” & 0.500" dia. sizes)
Best output smoothness
Greater reliability
Various stroke lengths
Infinite resolution
Various mounting options
Longest life
Various shaft-end options
• Resistance: 1, 2, 5, 10 & 20 KΩ, std. ±10%
• Torque, running: 0.15 - 0.40 oz-in
• Size (min): Less than one cubic inch
standard, PVC and Teflon
•
•
•
•
•
•
•
•
• Electrical angle: 325° - 350°
• Output: 0-5 VDC unipolar, bipolar to ±10 V
• Size (min): Less than one cubic inch
• Connector options: User selectable
Special linearities option
Greater reliability
Mechanical stops option
Infinite resolution
Longest life
Best output smoothness
Various non-linear tapers, taps,
multi-sections, electrical angles,
special total resistance
• Resistance: 1, 2, 5, 10 & 20 KΩ, std.
• Torque, start: 0.20 - 0.50 oz-in
• Size (min): Less than one cubic inch
standard, PVC and Teflon
Temperature Sensing
Probes & Assemblies
Features
Electrical Specifications
• Noise density: As low as 0.01°/s/√Hz
• Axis alignment: Standard
• Connector options: User selectable
•
•
•
•
•
•
•
• Non-linearity: ±0.1% FSR
• Axis alignment: Standard or precision
• Cable options: Commercial & MIL
Hall Effect
Position Sensors
temperature
• Axis alignment: Standard or precision
• Cable options: Commercial & MIL
DIY kits
Best output smoothness
Less space (0.702" dia. sizes)
0.187" working height
Greater reliability
Linear elements available
Infinite resolution
Longest life
• Offset drift: As low as 0.5°/sec over
• Power supply: 8-30 VDC typical
• Number of axes: 1 to 3
•
•
•
•
•
•
•
•
temperature
Mechanical Specifications
• Number of axes: 1 to 3
Motorized
Potentiometers
Features
Electrical Specifications
• Measurement range: Less than ±1 g
Hollow Shaft
Precision
Potentiometers
Linear Precision
Potentiometers
Features
• Rugged, reliable performance
• High accuracy and linearity over
wide temperature range
• Precision alignment on most
triaxial models
• Calibration certificate
• Self-test on digital command
• Built-in power supply regulation
• Suitable for harsh environments
• Wide bandwidth available
• IdentiCal™ interchangeable
uniaxial analog accelerometer
• Three-year warranty
Precision Temperature Sensors & Heater Assemblies
Precision Position Sensors & Input Controls
Precision Inertial Products & Systems
Styles
Immersion – threaded stainless, copper,
brass, plastic
Surface – ring terminal, rectangular,
with mounting holes, clip-ons
Air/general purpose – flange mount, various
materials, molded, plastic
Other Specifications
Special designs for moisture resistance/
freeze-thaw applications
Serving a wide range of markets and
applications
Broad range of wire types and styles
Various connector systems
Sensors
NTC thermistors, interchangeable
accuracies to ±0.1°C
RTDs, Pt100, Pt1000
Silicon PTC
IC temperature sensors
Digital temperature sensors
Ceramic PTC thermistors
Styles
Immersion – threaded stainless, copper,
brass, plastic
Surface – ring terminal, rectangular,
with mounting holes, clip-ons
Air/general purpose – flange mount,
various materials, molded, plastic
Other Specifications
Special test capabilities for RCA DO-160D,
MIL-T-23648
Styles
Silicon PTC elements
Epoxy coated disc or chip
PTC motor protection sensors
Precision interchangeables
PTC over-temperature protectors
Axial glass encapsulated (DO-35 pkg)
RTD elements
Radial glass encapsulated
SMD (1206 / 0805 palladium silver) –
(0603 / 0805 nickel barrier)
Electrical
Steady state currents up to 36 amps
Resistance values from 0.5Ω
to 1.38MΩ
Beta values from 3000 to 4850
Resistance tolerances from 20% to 1%
Accuracies of ±1.0°C to ±0.1°C or better
Mechanical
Sizes from .051" max diameter over 1.25"
Design and application assistance from
an experienced engineering group
Time constant down to 6 sec
Broad range of wire types and styles
Inside and outside kink configurations
for Surge-Gard line
Various connector systems
Types
Surge-Gard (in rush current limiter)
Custom configurations available
Silicon PTC Elements
DO7 glass encapsulation
Molded epoxy encapsulation
Radial and axial leads and SMD
MIL approved series
Glass/hermetically sealed, MIL-T-23648/19
Molded type, MIL-T-23648/9
Motor Temperature Series
Disc, chip, rectangular, cylindrical
and other shapes
Coated or uncoated
Switchpoints from 50°C to 180°C
Voltage ratings from 5V to 400V
Applications
Self-regulating heating elements
Overcurrent protectors
Over-temperature protection
Motor protection sensors
Motor starting
Constant current
Rugged designs with Teflon insulated leads
Liquid level/air flow
Switch temperatures from 50ºC to 150ºC
Other Specifications
Custom designs
Over-temperature Protectors
Self-regulating PTC thermistor elements –
range of voltage ratings, switch
temperatures and wattages
Cartridge heating elements
Kapton, silicone rubber and mica heaters
Flexible thermofoil heaters
Integral Sensors
NTC thermistor elements with a range
of values and curves
Platinum and nickel RTD elements
Bimetal thermostats
Integrated thermal fuse
Other Specifications
Size and shape of assembly
With extension leads and connectors
Insulation materials and isolation
specifications
Packaged heating elements
Electrical terminations
Power transistors, heat sinks, chassis, etc
Aluminum mounting tab, hole for #6 stud
Switch temperatures from 40ºC to 120ºC
RTD Elements
Platinum and nickel elements
Wide operating temperature ranges
meas-spec.com
Analog
Accelerometers
Inertial
Measurement
Systems
Rate
Gyros
Digital
Accelerometers
Resistive Element
Segment & Wiper
Assemblies
Rotary Precision
Potentiometers
• User configurable settings
• RS485 serial and analog outputs
• High accuracy and linearity
over wide temperature range
• True DC response with
bandwidth to 10 kHz available
• Fully calibrated to NIST
traceable standards, with built-in
calibration data
• Suitable for harsh environments
• Three-year factory warranty
• Complete units; no external
amplifiers, signal conditioners,
or digitizers required
to more than ±500 g
• Measurement range: Less than ±1 g
to more than ±500 g
• High accuracy and linearity over
wide temperature range
• Fully calibrated to NIST traceable
standards, with data
• IdentiCal™ interchangeable
uniaxial model
• Small size
• Choice of cables and PCB
termination option
• Suitable for harsh environments
• Three-year warranty
• Bandwidth: DC to 10 kHz, 20 kHz optionally
• Sensitivity: 20 mV/g to 1 V/g, can be
• Sensitivity: User configurable
normalized
• Sensitivity drift: As low as 0.1% over
temperature
• Offset drift: As low as 2 mg over
temperature
• Sensitivity drift: As low as 0.3% over
temperature
• Offset drift: As low as 20 mg over
temperature
• Non-linearity: As low as 0.1%
• Non-linearity: As low as 0.1%
• Noise density: As low as 110 µg/√Hz
• Noise density: As low as 10 µg/√Hz
• Output (analog): 0-5 VDC unipolar,
• Output: 0-5 VDC unipolar,
bipolar to ±10 V
• Measurement range: Less than
±50°/sec to more than ±20,000°/sec
• Bandwidth: DC to 10 kHz, 20 kHz optionally
bipolar to ±10 V
• Power supply: 8-30 VDC typical
• Power supply: 8-30 VDC typical
• Completely self-contained;
no need for external power source
• Easy to use, install, and configure
• User-programmable settings
• Can be set up in 20 minutes or less
• IRIG-106 compliant wireless
telemetry transmitters available
• Free ICU software for instrument
configuration and TMATS file
generation
• Extended model (65210E)
accommodates external inputs
• Bandwidth: 50 Hz / 100 Hz standard to
2.5 kHz optionally
• Sensitivity: As high as 27.5 mV/°/sec,
can be normalized
• Sensitivity drift: As low as 1% over
Inertial measurement products combine
an analog accelerometer (linear motion)
and a triaxial rate gyro (rotation or angular
motion) to determine the Six Degrees of
Freedom (6-DOF).
Possible electrical specifications for an IMS
can be found in the Analog Accelerometers
and Rate Gyros columns to the left.
• Number of axes: 1 to 3
• Mass (min): 35 grams
• Mass (min): 78 grams
• Mass (min): 35 grams
• Cable options: Commercial & MIL
• Connector options: User selectable
• Operating temp: -40°C to +85°C typical
• Operating temp: -40°C to +85°C typical
• Operating temp: -40°C to +85°C typical
• Calibration: NIST, temperature
• Calibration: NIST, temperature
• Calibration: NIST, temperature
• Product testing: To rigorous internal
standards
• Shock survivability: 5,000 g
compensation
• Product testing: Rigorous internal
standards plus DO-160
• Shock survivability: 4,000 g
• Product testing: Rigorous internal
standards plus EMC, climatic, corrosive,
shock/vibration, lubricants, enclosure
• Shock survivability: 10,000 g
• Material: Rugged aluminum housing
•
•
•
•
•
•
•
•
Less space
Smooth motor operation
Greater reliability
Infinite resolution
No coupling
Longest life
With/without gear heads
Best output smoothness
•
•
•
•
Lead wires, lead lengths and terminations
HR370 high TG printed circuit board
JST and molex terminals/connectors
Special linearities, such as electrical
function and various angles
• Special shaft configurations (screwdriver,
slotted, thru-hole, and custom flats)
• Special flange mounting configurations
• Special gear and mounting frame
configurations
Specifications
• Resistance: 1, 2, 5, 10 & 20 KΩ, std. ±10%
• Electrical angle: 325° - 350°
• Electrical length: 0.500" - 4.000"
• Linearity: ±0.5%; special ±0.25%
• Linearity: ±0.5%; special ±0.1%
• Linearity: ±1.0%; special ±0.25%
• Electrical angle: 325° - 355°
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Linearity: ±0.5%; special ±0.1%
• Linearity: ±0.5%; special ±0.1%
• Linearity (dual output): ±0.2% absolute
• Resistance temperature coefficient:
• Output smoothness: 0.1% max.
• Output smoothness: 0.1% max.
• Resistance temperature coefficient:
• Resistance temperature
coefficient: ±400 PPM/°C max.
•
•
•
•
• Resistance temperature coefficient:
±400 PPM/°C max.
• Power rating @ 70°C: 1.0 to 2.0 Watts
• Resistance temperature coefficient:
±400 PPM/°C max.
• Power rating @ 70°C: 0.5 to 2.0 Watts
±500 PPM/°C max.
• Power rating @ 70°C: 1.0 Watt/stroke inch
• Resistance: 1, 2, 5, 10 & 20 KΩ,
std. ±10%
±400 PPM/°C max.
• Dielectric strength: 500 - 1000 VRMS
• Dielectric strength: 500 - 1000 VRMS
• Dielectric strength: 1000 VRMS
• Power rating @ 70°C: 0.5 to 2.0 Watts
• Insulation resistance: 100 MΩ min.
• Insulation resistance: 100 MΩ min.
• Insulation resistance: 100 MΩ min.
• Dielectric strength: 500 - 1000 VRMS
• Insulation resistance: 100 MΩ min.
• Resistance: 1, 2, 5, 10 & 20 KΩ,
std. ±10%
• Electrical angle: 1° - 359°/Dead Zone: 1° - 359°
• Linearity (single output): ±0.1% absolute
• Power rating @ 70°C: 0.5 to
2.0 Watts
• Dielectric strength: 500 - 1000 VRMS
• Material: Rugged aluminum housing
• Heavy duty & lightweight designs
• Custom solutions for specific
measurement or protection
requirements
• Surface, immersion, and air
temperature sensing
• Utilize variety of sensing elements:
NTC & PTC thermistors, RTDs, ICs
& digital sensors
• Quick response & excellent
thermal tracking
• Wide operating temperature
ranges -80°C to +500°C
• Testing to 10,000 freeze/thaw cycles
at 25°C; ±0.3% over full temperature range
• Electrical angle: 325° - 350°
Mechanical Specifications
• Element O.D.: 0.702", 0.888", 1.252",
1.805" dia.
• Element I.D.: 0.186", 0.435" dia.
at 25°C; ±0.4% over full temperature range
Tracking (dual output): ±0.3%
Power rating @ 25°C: 0.080 W, max.
Resolution: 12 bit/14 bit serial
Sampling rate: 600 μs standard; 200 μs
digital high speed
• Nominal supply voltage (Vdd): 4.5 - 5.5V
• Nominal supply voltage (Idd): 8.5 mA 11 mA standard; 13.5 mA - 16 mA digital
• Housing: 0.500", 0.625", 0.875",
1.062", 1.437" (dia)
• Shaft diameter: 0.125" - 0.250"
Output Options
• Housing: 0.312, 0.500" (dia)
• Housing: 0.875", 1.062", 1.437" (dia)
• Shaft diameter: 0.078" - 0.125"
• Shaft diameter: Specify (ID/flat/other)
• Torque, actuation force: 20g, nominal
• Torque, start: 0.20 - 0.50 oz-in
• Torque start: 0.20 - 0.50 oz-in
• Housing: 0.625", 0.875", 1.062",
1.437" (dia)
• Shaft diameter: Specify
•
•
•
•
a total of 16 measurement channels
Axis alignment: Precision
Size (min): Per customer
requirements
Cable options: Wireless or
commercial & MIL standard
Connector options: User selectable
• Torque, running: 0.15 - 0.40 oz-in
• Aerospace - sealed: <2.0 oz-in.
• Commercial - unsealed: < 0.05 oz-in.
• Rotational life: > 100 million revolutions (std.
Environmental Specifications
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -65°C to +125°C
• Operating temp: -55°C to +125°C
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Meets MIL-PRF-39023
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 50 million, min.
• Cycle life: 10 million stroke, min.
Material Specifications
• Operating temp: Specified by battery
• Calibration: NIST, temperature
compensation
• Product testing: To rigorous internal
standards
• Shock survivability: Specified by
transmitter
• Element: Co-molded conductive plastic
flush circuit
• Element: Co-molded conductive
plastic flush circuit
plastic flush circuit
• Element: Co-molded conductive
plastic flush circuit
• Element: Co-molded conductive
plastic flush circuit
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Contacts: Multifinger precious metal
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Insulator: Thermo plastic
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 6" length, min
• Lead wires: 30 AWG Teflon® - 8" length, min
• Lead wires: 28 AWG Teflon® -
• Mounting options: Epoxy O.D.
• Cover & Housing: Anodized aluminum
• Housing & Shaft: Stainless steel
• Housing: Anodized aluminum/thermo plastic
• Shaft: Stainless steel
• Solder terminals: Gold plated
• Material: Rugged aluminum housing
• Element: Co-molded conductive
• Mounting options: Servo/bushing
• Mounting options: T-clamps; custom options
• Analog - Ratiometric: Rail to rail/ 4-20mA
• Digital - PWM: 500 Hz (100 - 1,000 Hz available)
• Digital - Serial: 3 wire protocol (14 bit resolution)
Torque - Starting/Running
• Torque, running: 0.15 - 0.40 oz-in
• Number of axes: 6 internal with
Material Specifications
• Material: Rugged aluminum housing
Less space (flat pak)
Smooth motor installation
Infinite resolution
Longest life
No wiper installation/phasing
Best output smoothness
With/without connectors
Three section redundancy available
Heavy Duty Hi-Rel
Temperature Probes
& Assemblies
NTC
Thermistors
PTC
Thermistors
PTC Sensing
Elements
Heater
Assemblies
8" length, min
• Cover & Shaft: Stainless steel/thermo plastic
• Housing: Anodized aluminum
• Mounting options: Custom
• Shaft: Stainless steel
• Mounting options: Custom
bearing life, custom available)
• Electrical life: > 2,500 hours at 150°C
• Operating temp: -40°C to +125°C (150°C opt.) *
• Mechanical shock: Sawtooth 20G peak
• Vibration: High frequency, swept 3 - 2,000 Hz,
30G peak
• Magnetic field emission: At 30 CM,
less than 1° effect on compass
• EMI immunity: 120 A-m magnetic field and
5,400 V-m electric field
• RF emissions: Zero emission, swept 0.15 MHz 6,000 MHz
• Bearings: Precision miniature ball
• Mechanical OD: 0.500"/0.875"
• Shaft diameter: 0.125"
* Exposure to maximum rated conditions for
extended periods may affect device reliability
• Ideal for military, aerospace,
and medical applications
• Wide variety of precision NTC thermistor
curves available
• High stability, high accuracy 100Ω
and 1,000Ω platinum
• RTDs available
• Precision machined housing of stainless
steel, brass, aluminum, inconel and
other materials
• Operating temperatures from -50°C
to +500°C
• Special moisture and freeze/thaw
resistant designs available
• Customized to meet your exact sensing
requirements
• Various thermistor styles & surge
current limiters
• Rugged design & construction
• Very fast response times to
1.38MΩ for sensing thermistors
• Resistance values from 0.5Ω to
220Ω for Surge-Gard thermistors
• Operation from -50°C to +300°C
• High sensitivity to changes in
temperature
• High temperature stability
• Excellent long-term stability
• Platinum & nickel RTD elements
• -60°C to +250°C operation
for nickel
• -200°C to +600°C operation
for platinum
• Values from 100Ω to 1,000Ω
• Small size, fast response time
• Resistant to vibration and
thermal shock
• Available in standard DIN class
accuracies
• Ceramic PTC thermistors
• Over-current protection, motor
protection sensor & heater
applications
• No thermostat needed
• Virtually unlimited life
• Fast switching
• Rugged designs available
• Efficient operation
• Rapid response to changes
in temperature
• Custom designs and value
added assemblies
• Precision heating for a variety
of applications and markets
• Variety of heating elements
• Custom designs for a range
of temperatures
• Wide range of sizes, wattages
and styles
• Can be packaged with integral
sensors and other options
Styles
Heating Elements
Product Specifications
Sensors
NTC thermistors
RTDs, Pt100, Pt1000
Silicon PTC
IC temperature sensors
Digital temperature sensors
Ceramic PTC thermistors
standard, PVC and Teflon
compensation
•
•
•
•
•
•
•
•
• Insulation resistance: 100 MΩ min.
Environmental Specifications
compensation
Less space (0.312” & 0.500" dia. sizes)
Best output smoothness
Greater reliability
Various stroke lengths
Infinite resolution
Various mounting options
Longest life
Various shaft-end options
• Resistance: 1, 2, 5, 10 & 20 KΩ, std. ±10%
• Torque, running: 0.15 - 0.40 oz-in
• Size (min): Less than one cubic inch
standard, PVC and Teflon
•
•
•
•
•
•
•
•
• Electrical angle: 325° - 350°
• Output: 0-5 VDC unipolar, bipolar to ±10 V
• Size (min): Less than one cubic inch
• Connector options: User selectable
Special linearities option
Greater reliability
Mechanical stops option
Infinite resolution
Longest life
Best output smoothness
Various non-linear tapers, taps,
multi-sections, electrical angles,
special total resistance
• Resistance: 1, 2, 5, 10 & 20 KΩ, std.
• Torque, start: 0.20 - 0.50 oz-in
• Size (min): Less than one cubic inch
standard, PVC and Teflon
Temperature Sensing
Probes & Assemblies
Features
Electrical Specifications
• Noise density: As low as 0.01°/s/√Hz
• Axis alignment: Standard
• Connector options: User selectable
•
•
•
•
•
•
•
• Non-linearity: ±0.1% FSR
• Axis alignment: Standard or precision
• Cable options: Commercial & MIL
Hall Effect
Position Sensors
temperature
• Axis alignment: Standard or precision
• Cable options: Commercial & MIL
DIY kits
Best output smoothness
Less space (0.702" dia. sizes)
0.187" working height
Greater reliability
Linear elements available
Infinite resolution
Longest life
• Offset drift: As low as 0.5°/sec over
• Power supply: 8-30 VDC typical
• Number of axes: 1 to 3
•
•
•
•
•
•
•
•
temperature
Mechanical Specifications
• Number of axes: 1 to 3
Motorized
Potentiometers
Features
Electrical Specifications
• Measurement range: Less than ±1 g
Hollow Shaft
Precision
Potentiometers
Linear Precision
Potentiometers
Features
• Rugged, reliable performance
• High accuracy and linearity over
wide temperature range
• Precision alignment on most
triaxial models
• Calibration certificate
• Self-test on digital command
• Built-in power supply regulation
• Suitable for harsh environments
• Wide bandwidth available
• IdentiCal™ interchangeable
uniaxial analog accelerometer
• Three-year warranty
Precision Temperature Sensors & Heater Assemblies
Precision Position Sensors & Input Controls
Precision Inertial Products & Systems
Styles
Immersion – threaded stainless, copper,
brass, plastic
Surface – ring terminal, rectangular,
with mounting holes, clip-ons
Air/general purpose – flange mount, various
materials, molded, plastic
Other Specifications
Special designs for moisture resistance/
freeze-thaw applications
Serving a wide range of markets and
applications
Broad range of wire types and styles
Various connector systems
Sensors
NTC thermistors, interchangeable
accuracies to ±0.1°C
RTDs, Pt100, Pt1000
Silicon PTC
IC temperature sensors
Digital temperature sensors
Ceramic PTC thermistors
Styles
Immersion – threaded stainless, copper,
brass, plastic
Surface – ring terminal, rectangular,
with mounting holes, clip-ons
Air/general purpose – flange mount,
various materials, molded, plastic
Other Specifications
Special test capabilities for RCA DO-160D,
MIL-T-23648
Styles
Silicon PTC elements
Epoxy coated disc or chip
PTC motor protection sensors
Precision interchangeables
PTC over-temperature protectors
Axial glass encapsulated (DO-35 pkg)
RTD elements
Radial glass encapsulated
SMD (1206 / 0805 palladium silver) –
(0603 / 0805 nickel barrier)
Electrical
Steady state currents up to 36 amps
Resistance values from 0.5Ω
to 1.38MΩ
Beta values from 3000 to 4850
Resistance tolerances from 20% to 1%
Accuracies of ±1.0°C to ±0.1°C or better
Mechanical
Sizes from .051" max diameter over 1.25"
Design and application assistance from
an experienced engineering group
Time constant down to 6 sec
Broad range of wire types and styles
Inside and outside kink configurations
for Surge-Gard line
Various connector systems
Types
Surge-Gard (in rush current limiter)
Custom configurations available
Silicon PTC Elements
DO7 glass encapsulation
Molded epoxy encapsulation
Radial and axial leads and SMD
MIL approved series
Glass/hermetically sealed, MIL-T-23648/19
Molded type, MIL-T-23648/9
Motor Temperature Series
Disc, chip, rectangular, cylindrical
and other shapes
Coated or uncoated
Switchpoints from 50°C to 180°C
Voltage ratings from 5V to 400V
Applications
Self-regulating heating elements
Overcurrent protectors
Over-temperature protection
Motor protection sensors
Motor starting
Constant current
Rugged designs with Teflon insulated leads
Liquid level/air flow
Switch temperatures from 50ºC to 150ºC
Other Specifications
Custom designs
Over-temperature Protectors
Self-regulating PTC thermistor elements –
range of voltage ratings, switch
temperatures and wattages
Cartridge heating elements
Kapton, silicone rubber and mica heaters
Flexible thermofoil heaters
Integral Sensors
NTC thermistor elements with a range
of values and curves
Platinum and nickel RTD elements
Bimetal thermostats
Integrated thermal fuse
Other Specifications
Size and shape of assembly
With extension leads and connectors
Insulation materials and isolation
specifications
Packaged heating elements
Electrical terminations
Power transistors, heat sinks, chassis, etc
Aluminum mounting tab, hole for #6 stud
Switch temperatures from 40ºC to 120ºC
RTD Elements
Platinum and nickel elements
Wide operating temperature ranges
meas-spec.com
Application - Specific Solutions
Often, a 100% off-the-shelf sensor will not meet the unique measurement and environmental demands found
in many OEM applications. Our experienced engineering teams are ready to develop a custom solution that
meets your specific requirements. Whether modifying an existing sensor design or working from a “clean sheet”
approach, the resulting Measurement Specialties sensor will be tailored to your exact requirements and push the
envelope
of product performance.
A World of Precision,
High Reliability Applications
Flexible & Low Cost
Manufacturing Centers
For applications that require exacting performance
and the ability to withstand demanding environmental
conditions, turn to Measurement Specialties. We design,
manufacture and test our sensors to meet a variety
of IP or NEMA ratings, military standards and other
high reliability requirements, as well as general
commercial applications.
Measurement Specialties operates three sensor
manufacturing facilities in St. Marys, PA, Grass Valley, CA
and Akron, OH. These highly efficient plants provide
additional capacity and flexibility, allowing us to
schedule production globally and ramp up to meet
fast-track delivery requirements.
Responsive Engineering
& Customer Service
We understand the need for speed in today’s fast
paced product development world. Our talented
engineers can modify an existing sensor product or
design a completely new solution within a timeline
that meets your requirements. Following a production
release, our customer service group will work with you
for complete global logistic support, including schedule
sharing programs.
Precision Sensors
Selection Guide
Precision Inertial Products • Precision Position Sensors & Input Controls
Precision Temperature Sensors & Heater Assemblies
World Class Quality
Precision Sensors
An industry leader in precision sensors for position,
temperature and inertial measurement
Measurement Specialties offers a diverse family of position, temperature and inertial
measurement sensors that can be custom designed or modified for your application
and delivered in the industry’s shortest lead times. Complementing our flexible approach
to finding the ideal sensing or heating solution for your design are our low cost
manufacturing facilities and global logistics … adding up to the most cost effective,
high performance sensors available today!
Precision Sensor Applications
Measurement Specialties’ products are ISO 9001:2008
certified and adhere to world class manufacturing
techniques to ensure each customer receives the
reliability they demand. This commitment to quality
has produced a reputation for dependability and
resulted in preferred supplier status at many of
the world’s leading OEMs.
Precision Inertial Products & Systems
• Military & Aerospace - weapons research/development and testing, stores separation and captive
carry testing, air refueling drogues, helicopter cockpit instrumentation, training metrics, HUMS for
aircraft PM
• Alternative Energy - wind turbine sway and safety systems, condition monitoring of wind turbines,
offshore platform movement
• Transportation - automobile dynamics, railway monitoring (vibration, braking and acceleration),
commercial shipping
• Off-Highway Equipment - compacting machine movement, pile driver hammer position
• Commercial/Industrial - machine vibration, robotic movements, pipeline inspection, building monitors,
bridge/dam structural analysis, seismic activity
CERTIFIED
Precision Position Sensors & Input Controls
• Military & Aerospace - aircraft cockpit instruments, fuel and throttle controls, angle of attack controls,
missile fin actuators, weapons guidance controls, stall warning, remote piloted vehicle actuation, turret
and brake pedal vehicle controls, gun elevation and steering controls, vehicle joysticks
• Medical - robot joint feedback, imaging equipment, prosthetics, physical therapy equipment,
endoscopy controls
• Off-Highway Vehicles - actuator controls, joystick controls, steering systems, diesel engine throttles,
diesel emissions systems
• Commercial/Industrial - camera positioning devices, process control valves, automation controls,
wind direction devices
meas-spec.com
Precision Temperature Sensors & Heater Assemblies
Inertial Sensor Products
Position Sensor Products
Temperature Sensor Products
2236 N. Cleveland-Massillon Road
Akron, Ohio 44333
Phone: 330-659-3312
Fax:
330-659-3286
424 Crown Point Circle
Grass Valley, California 95945
Phone: 530-273-4608
Fax:
530-273-0769
1028 Graphite Road
St. Marys, Pennsylvania 15857
Phone: 814-834-1541
Fax:
814-834-1556
AHA
8/13
©2013 Measurement Specialties
Printed in U.S.A.
• Military & Aerospace - cabin and air inlet, engine fluids, brake systems, transmission/gear fluid,
fuel systems, climate controls, hydraulic systems, de-icing systems, on-board electronics, missile
guidance and launch, satellites, radar systems, and electronics
• Medical - imaging equipment, diagnostic and lab equipment, blood analyzers, anesthesia delivery,
medical storage, dialysis equipment, incubators
• Off-Highway Vehicles - climate control, diesel engine fluids, fuel systems, brake systems,
emissions control systems
• Commercial/Industrial - power management, appliance motors, gas detection and analysis
• Refrigeration - supermarket refrigeration systems and controls, walk-in coolers, defrost controls
• HVAC - chillers, heat pumps, PTACs, boilers, furnace, air handlers, zone controls
• Food & Beverage - soda and coffee dispensers, POS refrigerators, display coolers, heating elements,
galley products
• Pool & Spa - water heaters and sensors