Buccaneer 7000 Series Waterproof Connector Thermoplastic Body Wiring and Assembly instructions GB IMPORTANT - PLEASE READ It is important that these instructions are fully complied with to ensure this product is completely watertight and electrically safe - IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN. Always wire socket insert to supply, wire plug insert to appliance. However plug/socket inserts can be fitted into any style of main body to give correct plug/socket combination for your application. Cable Glands To ensure the correct cable sealing pairs of cable glands and collets are available to accurately fit cable diameters from 5.0mm to 15.00mm. It is important to match the correct gland to the cable used, these are: Cable diameter Gland Colour 5.0-7.0mm 7.0-9.0mm 9.0-11.0mm 11.0-13.0mm 13.0-15.0mm IMPORTANT SAFETY NOTICE For your protection all mains (250V) equipment used out of doors, in damp or wet conditions should be supplied from a correctly fused source and protected by an approved R.C.D. to BS7071, BS7288, BS4293, BS EN 61008-1, BS EN 1008-2-2 IF IN DOUBT SEEK ADVICE Grey White Black Yellow Light Grey Ratings Poles: Current Rating: CCC, UL and VDE cUL Voltage Rating (ac/dc) CCC, VDE UL, cUL Conductor Accommodation (max) 2 3 6 10 32 25A 25A 25A 25A 10A 8A 10A 6A 3A 2A 600V 600V 600V 600V 500V 600V 277V 600V 200V 600V 6.0mm² 6.0mm² 1.0mm² 18AWG 22AWG bulgin a brand of Elektron Technology www.elektron-bulgin.com For full technical specification visit: www.elektron-bulgin.com 7000 Series – PXP7010 & PXP7011 1 5 2 6 3 4 7000 Series – PXP7012 1 5 6 2 3 4 7000 Series 15065/SP Contact carrier removal 14944-45 Contact pin/socket extraction Part no: 15095 Issue no: 1.3