Buccaneer 6000 Series Waterproof Connector For Power - Metal Body Wiring and Assembly instructions GB IMPORTANT - PLEASE READ It is important that these instructions are fully complied with to ensure this product is completely watertight and electrically safe - IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN. Always wire socket insert to supply, wire plug insert to appliance. However plug/socket inserts can be fitted into any style of main body to give correct plug/socket combination for your application. Do not twist bodies when unmating connector, ensure a linear pull is applied. Cable Glands To ensure the correct cable sealing pairs of cable glands and collets are available to accurately fit cable diameters from 4.0mm up to 10.0mm. It is important to match the correct gland to the cable used, these are: Cable diameter Gland Colour 4.0-5.0mm 5.0-7.0mm 7.0-9.0mm 9.0-10.0mm Dark Grey White Yellow Light Grey Ratings Poles: Current Rating: Voltage Rating: Conductor accommodation: metric equivalents: 2 16A 277V 3 12A 277V 8 10A 277V 16 3A 60V 22 3A 60V 14-18 AWG 14-18 AWG 18-20 AWG 22-26 AWG 22-26 AWG 2.0-0.75mm2 2.0-0.75mm2 0.75-0.5mm2 0.33-0.14mm2 0.33-0.14mm2 bulgin a brand of Elektron Technology www.elektron-bulgin.com For full technical specification visit: www.elektron-bulgin.com 6000 Series - PXM0610 & PXM0611 1 3 2 4 2a PXM/xxxx/xx/x/xx/xxxx/SN 5 2b PXM/xxxx/xx/x/xx/xxxx/SN 6 2c PXM/xxxx/xx/x/xx/xxxx/SN 6000 Series - PXM0612 1 5 6 2 3 4 6000 Series 14917/SP Contact carrier removal 14944-45-46 Contact pin/socket extraction Part no: 15055 Issue no: 1.1