Thick Film Chip Resistors Tin Lead Termination HOW TO ORDER CR S 10- 1003 F M Packaging M = 7” Reel V = 13” Reel O = Cutting Tape K = Sample Kit Tolerance (%) J = +5 F = +1 G = +0.5 D = +0.1 EIA Resistance Value Standard Decade Values Size 00 = 01005 20 = 0201 05 = 0402 16 = 0603 10 = 0805 18 = 1206 14 = 1210 12 = 2010 FEATURES 01 = 2512 01P = 2512-P Excellent stability over a wide range of environmental conditions Operating temperature -55°C ~ +125°C Termination Material S = Tin Lead Series CJ = Jumper ISO/TS 16949:2009 Certified CR = Resistor SCHEMATIC Wrap Around Terminal CRS, CJS, CRPS, CJPS type Overcoat Conductor Wrap Around Termination Material: SnPb Ceramic Substrate Resistive Element DIMENSIONS (mm) Size Code L W c d t 01005 Size 00 0.40 + 0.02 0.20 + 0.02 0.08 + 0.03 0.10 + 0.03 0.12 + 0.02 0201 20 0.60 + 0.03 0.30 + 0.03 0.10 + 0.05 0.15 + 0.05 0.25 + 0.05 0402 05 1.00 + 0.05 0.5+0.1-0.05 0.20 + 0.10 0.25+0.05-0.10 0.35 + 0.05 0603 16 1.60 + 0.10 0.80 + 0.10 0.20 + 0.10 0.30+0.20-0.10 0.50 + 0.10 0805 10 2.00 + 0.15 1.25 + 0.15 0.40 + 0.25 0.30+0.20-0.10 0.50 + 0.15 1206 18 3.20 + 0.15 1.60 + 0.15 0.45 + 0.25 0.40+0.20-0.10 0.60 + 0.15 1210 14 3.20 + 0.20 2.60 + 0.20 0.50 + 0.30 0.40+0.20-0.10 0.60 + 0.10 2010 12 5.00 + 0.20 2.50 + 0.20 0.50 + 0.30 0.50+0.20-0.10 0.60 + 0.10 2512 01 6.30 + 0.20 3.10 + 0.20 0.50 + 0.30 0.50+0.20-0.10 0.60 + 0.15 01P 6.50 + 0.30 3.20 + 0.20 0.60 + 0.30 1.50 + 0.30 0.60 + 0.10 2512-P ELECTRICAL SPECIFICATIONS for CHIP RESISTORS Size 0201 0402 0603 1/20W 1/16W 1/10W 1/8W 25V 50V 50V 150V Overload Voltage 50V 100V 100V 300V Operating Temp. 70°C 70°C 70°C 70°C 2512 Power Rating (EIA 575) Working Voltage* Size 0805 1206 1210 2010 Power Rating (EIA 575) 1/4W 1/3W 1/2W 1W Working Voltage* 200V 200V 200V 200V Overload Voltage 400V 400V 400V 400V Operating Temp. 70°C 70°C 70°C 70°C American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected] 1 Thick Film Chip Resistors Tin Lead Termination Tolerance (%) and Resistance Size TCR (ppm/°°C) 0201 ±200 +600 -200 D(±0.1%) & E-96 & E-24 G(±0.5%) & E-96 & E-24 100Ω-10KΩ 100Ω-4.99KΩ 10Ω≤R≤100Ω ±100 1Ω-9.1Ω 1Ω-9.1Ω 10Ω≤R100Ω 1MΩ≤R≤10MΩ +500 -200 ±400 ±100 ±200 0603 J(±5%) & E-24 10Ω-10MΩ 100Ω-1MΩ ±200 0402 F(±1%) & E-96 & E-24 10Ω-2MΩ 1Ω-9.1Ω 10Ω-560kΩ 10Ω-1MΩ 10Ω-1MΩ 1M≤R≤10MΩ 1Ω-9.1Ω ±100 ±200 10Ω-560kΩ 10Ω-1MΩ 10Ω-1MΩ 1M≤R≤10MΩ ±400 1Ω-9.1Ω ±100 ±200 1206 10Ω-560kΩ 10Ω-1MΩ 10Ω-1MΩ 1M≤R≤10MΩ ±400 1Ω-9.1Ω ±100 ±200 1210 10Ω-560kΩ 10Ω-1MΩ 10Ω-1MΩ 1M≤R≤10MΩ ±400 1Ω-9.1Ω ±100 ±200 2010 10Ω-560kΩ 10Ω-1MΩ 10Ω-1MΩ 1M≤R≤10MΩ ±400 1Ω-9.1Ω ±100 ±200 2512 1Ω-9.1Ω 10MΩ≤R≤20MΩ ±400 0805 10Ω-10MΩ 10Ω-560kΩ 10Ω-1MΩ 10Ω-1MΩ 1M≤R≤10MΩ ±400 1Ω-9.1Ω 10Ω-10MΩ 1Ω-9.1Ω 10MΩ≤R≤20MΩ 10Ω-10MΩ 1Ω-9.1Ω 10MΩ≤R≤20MΩ 10Ω-10MΩ 1Ω-9.1Ω 10MΩ≤R≤20MΩ 10Ω-10MΩ 1Ω-9.1Ω 10MΩ≤R≤20MΩ 10Ω-10MΩ 1Ω-9.1Ω 10MΩ≤R≤20MΩ 10Ω-10MΩ 1Ω-9.1Ω 10MΩ≤R≤20MΩ * Rated Voltage: √PxR ELECTRICAL SPECIFICATIONS for ZERO OHM JUMPERS Series Rated Current CJS20 (0201) 0.5A (70°C) CJS05 (0402) 1A (70°C) CJS06 (0603) 1A (70°C) CJS10 (0805) 2A (70°C) CJS18 (1206) 2A (70°C) CJS14 (1210) 2A (70°C) CJS12 (2010) 2A (70°C) CJS01 (2512) 2A (70°C) 50 m Ω 50 m Ω 50 m Ω 50 m Ω 50 m Ω 50 m Ω 50 m Ω 50 m Ω 2.5A 2.5A 5A 5A 5A 5A 5A -55°C ~ +125°C -55°C ~ +125°C -55°C ~ +125°C -55°C ~ +125°C -55°C ~ +125°C -55°C ~ +125°C -55°C ~ +125°C Resistance (Max) Max. Overload Current Working Temp. 1A -55°C ~ +125°C * Rated Voltage: √PxR American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected] 2 Thick Film Chip Resistors Tin Lead Termination DERATING CURVE For resistors operated at ambient temperature over 70°, power rating shall be derated in accordance with figure 1. Figure 1 The rated voltage is calculated by the following formula: E=Rated Voltage(V), P=Rated Power(W), E= √P * R R=Resistance Value(Ω) RELIABILITY TESTS Reference standard Test Items Condition of Test Test Limits ∆R Temperature Coefficient of Resistance IEC60115-1-4.8 JIS-C5201-1-4.8 -55~+125 °C Refer 5.0 Short Time Overload IEC60115-1-4.8 JIS-C5201-1-4.13 2.5 X rate voltage for 5 sec ±(1% + 0.05Ω) Remarks: 0201 : ±(3% + 0.1Ω) 0Ω : 50mΩ or less Intermittent Overload IEC60115-1-4.39 JIS-C5201-1-4.39 3.0 X rated voltage or Max Overloading voltage, 1sec “ON”, 25sec “OFF”, 10000 cycles Remarks: 0201-NA, 0402 2.5 X RCWV*) Endurance (Load Life) IEC60115-1-4.25.1 JIS-C5201-14.25.1 1000 hours at rated voltage, 70°C, 1.5hours “ON”, 0.5hour “OFF” Load Life with Humidity IEC60115-1-4.24 JIS-C5201-1-4.24 1000 hours at rated voltage, 40±2°C, 90~95% RH 1.5hours “ON”, 0.5hour “OFF” Rapid Change of Temperature IEC60115-1-4.19 JIS-C5201-1-4.19 -55°C (30 min.) / +155°C (30 min.) 5 cycles Solderability IEC60115-1-4.17 JIS-C5201-1-4.17 245±5°C solder, 2±0.5 sec dwell. Solder: Sn96.5 / Ag3.0 / Cu0.5 Robustness of Termination (Bending) IEC60115-1-4.33 JIS-C5201-1-4.33 3mm deflection 2mm deflection (RM20,25) IEC60115-1-4.7 JIS-C5201-1-4.7 Applying voltage: 0201: 50V, 0402 & 0603: 300V The other 500V for a minute No abnormalities such as flashover, burning dielectric breakdown shall appear Applying voltage 100V for 1 minute. Remark: 0201 50V ≥ 1GΩ Dielectric Withstanding Voltage (Voltage Proof) Insulation Resistance Resistance to Dry Heat Resistance to Solder Heat IEC60115-1-4.6 JIS-C5201-1-4.6 IEC60115-1-4.23.2 JIS-C5201-14.23.2 IEC60115-1-4.18 JIS-C5201-1-4.18 155±5°C for 96±4hours Remark: 0201 125±5°C 270±5°C solder, 10±1 sec dwell. 0402 : ±(2% + 0.1Ω) ±(5.0% + 0.1Ω) 0Ω : 50mΩ or less 0.1%, 0.5%, 1% : ±(1.0% + 0.05Ω) 2%, 5% : ±(3.0%+ 0.1Ω) Remarks: 0201 : ±(5% + 0.1Ω) 0402 : ±(3% + 0.1Ω) 0Ω : 100mΩ or less 0.1%, 0.5%, 1% : ±(1.0% + 0.05Ω) 2%, 5% : ±(3.0%+ 0.1Ω) Remarks: 0201 : ±(5% + 0.1Ω) 0402 : ±(3% + 0.1Ω) 0Ω : 100mΩ or less 0.1%, 0.5%, 1% : ±(0.5% + 0.05Ω) 2%, 5% : ±(1.0%+0.05Ω) Remarks: 0201 : ±(3% + 0.1Ω) 0Ω : 50mΩ or less At least 95% of surface area of electrode shall be covered with new solder 0.1%, 0.5%, 1% : ±(0.5% + 0.05Ω) 2%, 5% : ±(1.0%+0.05Ω) Remarks: 0201 : ±(1.0% + 0.1Ω) 0Ω : 50mΩ or less 0.1%, 0.5%, 1% : ±(1.0% + 0.05Ω) 2%, 5% : ±(2.0% + 0.1Ω) Remarks: 0201 : ±(2.0% + 0.1Ω) 0Ω : 50mΩ or less 0.1%, 0.5%, 1% : ±(0.5% + 0.05Ω) 2%, 5% : ±(1.0% + 0.05Ω) Remarks: 0201 : ±(3.0% + 0.1Ω) 0Ω : 50mΩ or less Note: RCWV: Rated continuous working voltage American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected] 3 Thick Film Chip Resistors Tin Lead Termination EIA Standard Values 1.0 1.8 3.3 5.6 Decade Values in the EIA Standard E-24 Series: 1.1 1.2 1.3 1.5 1.6 2.0 2.2 2.4 2.7 3.0 3.6 3.9 4.3 4.7 5.1 6.2 6.8 7.5 8.2 9.1 Decade Values in the EIA Standard E-96 Series: 1.00 1.02 1.05 1.07 1.10 1.13 1.15 1.18 1.21 1.24 1.27 1.30 1.33 1.37 1.40 1.43 1.47 1.50 1.54 1.58 1.62 1.65 1.69 1.74 1.78 1.80 1.82 1.87 1.91 1.96 2.00 2.05 2.10 2.15 2.20 2.21 2.26 2.32 2.37 2.43 2.49 2.56 2.61 2.67 2.74 2.80 2.87 2.94 3.00 3.01 3.09 3.16 3.24 3.32 3.40 3.48 3.57 3.65 3.74 3.83 3.90 3.92 4.02 4.12 4.22 4.32 4.42 4.53 4.64 4.70 4.75 4.87 4.99 5.11 5.23 5.36 5.49 5.60 5.62 5.76 5.90 6.04 6.19 6.20 6.34 6.49 6.65 6.80 6.81 6.98 7.15 7.35 7.50 7.68 7.87 8.06 0603, 0805, 1206, 1210, 2010, 2512 Sizes EIA 3 Digit Code of 10K ohm resistor E-24 Values, E-96 Values 103 8.25 8.45 8.56 8.87 9.09 9.31 9.53 9.76 10.0 10.2 10.5 10.7 11.0 11.3 11.5 11.8 12.0 12.1 12.4 12.7 13.0 13.3 13.7 14.0 14.3 14.7 15.0 15.4 15.8 16.0 16.2 16.5 16.9 17.4 17.8 18.0 18.2 18.7 19.1 19.6 20.0 20.5 21.0 21.5 22.0 22.1 22.6 23.2 23.7 24.0 24.3 24.9 25.5 26.1 26.7 27.0 27.4 28.0 28.7 29.4 30.0 30.1 30.9 31.6 32.4 33.0 33.2 34.0 34.8 35.7 36.0 36.5 37.4 38.3 39.0 39.2 40.2 41.2 42.2 43.0 43.2 44.2 45.3 46.4 47.0 47.5 48.7 49.9 51.0 51.1 52.3 53.6 54.9 56.0 56.2 57.6 0805, 1206, 1210, 2010, 2512 Sizes EIA 4 Digit Code of 121K ohm resistor E-96 Values 1213 0603 MARKING CODE for E96 VALUES 59.0 60.4 61.9 62.0 63.4 64.9 65.5 68.0 68.1 69.8 71.5 73.2 75.0 76.8 78.7 80.6 82.0 82.5 84.5 86.6 88.7 90.9 91.0 93.1 95.3 97.6 Those items in a shaded box are also E-24 values and will be marked with the EIA 3 Digit Code. By combining a specific two digit number and a letter code, you have a series of numeric/alpha digits that give you the complete (E96) resistance value codes for 0603 size part marking. Value Code Value Code Value Code Value Code 10.0 10.2 10.5 10.7 11.0 11.3 11.5 11.8 12.1 12.4 12.7 13.0 13.3 13.7 14.0 14.3 14.7 15.0 15.4 15.8 16.2 16.5 16.9 17.4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 17.8 18.2 18.7 19.1 19.6 20.0 20.5 21.0 21.5 22.1 22.6 23.3 23.7 24.3 24.9 25.5 26.1 26.7 27.4 28.0 28.7 29.4 30.1 30.9 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 31.6 32.4 33.2 34.0 34.8 35.7 36.5 37.4 38.3 39.2 40.2 41.2 42.2 43.2 44.2 45.3 46.4 47.5 48.7 49.9 51.1 52.3 53.6 54.9 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 56.2 57.6 59.0 60.4 61.9 63.4 64.9 66.5 68.1 69.8 71.5 73.2 75.0 76.8 78.7 80.6 82.5 84.5 86.6 88.7 90.9 93.1 95.3 97.6 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Letter Multiplier Cross Reference A =10 C = 1,000 E = 100,000 B = 100 D = 10,000 F = 1,000,000 0603 Code 01B 25C 93D Explanation 01 = 10.0 & B = 100 25 = 17.8 & C = 1,000 93 = 90.9 & D = 10,000 VALUE MARKING For those parts ordered with an E-24 value, the product will be marked with a 3 digit code. For those products ordered with an E-96 value, the product will be marked with a 4 digit code. For those parts which fall under E-96 and E-24 values (e.g. 1K ohm is both an E-96 and E-24 value), the part will be marked with a 3 digit code; 4 digit markings for this type is available upon special request. 01005, 0201, and 0402 Size No marking E-24 & E-96 Values 51B 0603 Size EIA 96 Digit Code of 3.32K ohm E-96 Values X=1 Y = 0.1 Value 10.0x100 = 1K Ω 17.8x1,000 = 17.8K Ω 90.9 x 10,000 = 909K Ω PACKAGE QUANTITY Type B M V Type B M V 01005 0201 0402 15,000 10,000 40,000 10,000 40,000 1206 5,000 5,000 20,000 0603 25,000 5,000 20,000 0805 10,000 5,000 20,000 1210 2010 2512 5,000 20,000 4,000 20,000 4,000 20,000 TAPE SCHEMATIC American Accurate Components, Inc. 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected] 4 Thick Film Chip Resistors Tin Lead Termination Rect. Punching Carrier Paper Tape Plastic (Embossed Tape) 0201, 0402, 0603, 0805, 1206, 1210 2010 & 2512 REEL DRAWINGS 01005 Size A 0.38±0.02 P1 2.0±0.05 B 0.68±0.02 P0 4.0±0.10 W 8.0±0.10 D0 1.55±0.03 F 3.5±0.05 t1 0.42±0.05 E 1.75±0.05 t2 0.5 7” Reel (M) K 0.27±0.02 13” Reel (V) PACKAGE DIMENSIONS (mm) 7” Reel (M) 180 ± 3.0 1.20 13.0 ± 0.2 9.0 ± 0.3 60 ± 1.0 11.4 ± 1.0 M H C G E F 13” Reel (V) 330±2.5 2.3± 0.5 13.0 ± 0.2 9.5 ± 0.5 80.0 ± 1.0 14.4 BULK CASE SCHEMATIC 0201 ~ 2512 Size TAPE DIMENSIONS (mm) A B W E F P1 T Tp A B W E F P1 T Tp 0201 0.41±0.1 0.71±0.1 8.0±0.2 1.75±0.10 3.5±0.05 2.0±0.05 0.5max 0.4+0.05 1206 2.0±0.15 3.6±0.15 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 0.90±0.1 0.75±0.1 0402 0.65±0.1 1.15±0.1 8.0±0.2 1.75±0.10 3.5±0.05 2.0±0.05 0.55±0.1 0.40±0.05 1210 2.9±0.1 3.5±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 0.90±0.1 0.75±0.1 0603 1.1±0.2 1.9±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 0.70±0.1 0.60±0.1 2010 2.9±0.1 5.3±0.1 12.0±0.2 1.75±0.1 5.5±0.05 4.0±0.1 1.0±0.1 0.25±0.1 TAPE Type Press Pocket Carrier Tape American Accurate Components, Inc. Resistor Size 01005 0805 1.65±0.2 2.4±0.2 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 0.90±0.1 0.75±0.1 2512 3.4±0.1 6.6±0.1 12.0±0.2 1.75±0.1 5.5±0.05 4.0±0.1 1.0±0.1 0.25±0.1 BULK CASE DIMENSIONS (mm) A B C D E 110. 0± 0.7 36.0 ± 0.2 12.0 ± 0.1 31.5 ±0.2 36.0 ±0.2 F 6.8 ±0.1 G H I 8.8 ±0.1 12.0 ± 0.1 1.5 ± 0.1 J K 2.0± 0.1 4.7± 0.1 LABEL DESCRIPTION One side surface of a reel is marked with a label with the following items of information. 1. Chip Resistor 2. Part Number 3. Tolerance 4. Quantity 5. Lot number for production month/year/suffix L* 6. Manufacturer’s name or symbol . 188 Technology Drive Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected] 5 Thick Film Chip Resistors Tin Lead Termination CRS-KITS Series, Thick Film Chip Resistor Engineering Kits This engineering and design kit is a great sales tool, allowing for application testing before ordering minimum quantities. AAC offers a wide assortment of popular chip resistors sizes and tolerances, in addition to a large quantity of each value. The kits are convenient with easy-to-use packaging. PACKAGE CONSTRUCTION E-24 KIT VALUES 3 Ring Binder Case Holder Plastic pages with slip holders for each value Each value is individually identified in a slip holder Resistors are packaged on paper tape strips 2.2 10 47 180 560 1.8K 5.6K 18K 56K 270K 2.7 18 68 220 680 2.2K 6.8K 3.9 22 75 270 850 2.7K 8.2K 22K 82K 390K 27K 100K 470K 4.7 27 100 330 1.0K 3.3K 6.8 33 120 390 1.2K 3.9K 10K 33K 120K 560K 12K 39K 150K 1.0M 8.2 39 150 470 1.5K 4.7K 15K 47K 220K 2.2M E-96 KIT VALUES 10.0 24.3 56.2 133 301 681 1.62K 4.22K 10.0K 23.7K 60.4K 150K 332K 649K 11.3 26.1 61.9 150 332 750 1.82K 4.75K 11.0K 27.4K 68.1K 162K 365K 681K 12.1 28.7 68.1 162 348 825 2.00K 5.11K 12.1K 30.1K 75.0K 178K 392K 732K 13.3 33.2 75.0 174 383 909 2.21K 5.62K 13.0K 33.2K 82.5K 200K 422K 750K 15.0 35.7 82.5 200 422 1.00K 2.37K 6.19K 15.0K 39.2K 90.9K 221K 464K 825K 16.5 39.2 90.9 215 475 1.10K 2.67K 6.81K 16.2K 41.2K 100K 237K 511K 866K 18.2 42.2 100 237 511 1.21K 3.01K 7.50K 18.2K 47.5K 110K 255K 536K 909K 20.0 46.4 107 261 549 1.33K 3.32K 8.25K 20.0K 49.9K 121K 274K 562K 953K 22.1 51.1 118 287 604 1.50K 3.92K 9.09K 22.1K 56.2K 130K 301K 619K 1.0M Engineering Kits J Type Engineering Kits F Type FEATURES FEATURES EIA Standard E-24 Values EIA Standard E-24 Values Full range from 1 Ω ~ 1M Ω Full range from 10 Ω ~ 1M Ω Resistance Tolerance of +5% Resistance Tolerance of +1% 3,000 Pieces: 50 pieces of 60 different values 3,150 Pieces: 25 pieces of 126 different values ISO 9002 Quality Certified products ISO 9002 Quality Certified products Part Number for +5% Sample Kit Part Number for +1% Sample Kit Part Number Description Part Number Description CRS05-J-KITS 0402, 1/16w, 5%, E-24 values (1Ω through 2.2M Ω) CRS05-F-KITS 0402, 1/16w, 1%, E-96 values (10 Ω through 1M Ω) CRS16-J-KITS 0603, 1/16w, 5%, E-24 values (1Ω through 2.2M Ω) CRS16-F-KITS 0603, 1/16w, 1%, E-96 values (10 Ω through 1M Ω) CRS10-J-KITS 0805, 1/10w, 5%, E-24 values (1Ω through 2.2M Ω) CRS10-F-KITS 0805, 1/10w, 1%, E-96 values (10 Ω through 1M Ω) CRS18-J-KITS 1206, 1/8w, 5%, E-24 values (1Ω through 2.2M Ω) CRS18-F-KITS 1206, 1/8w, 1%, E-96 values (10 Ω through 1M Ω) The content may change without notification 5/15/2015. American Accurate Components, Inc. 188 Technology Drive, Unit H, Irvine, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889