Solid State Relays & Contactors

Solid State Relays & Contactors
The Global Expert in Solid State Switching Technology
About us
Crydom, a brand of Custom Sensors & Technologies (CST) and Global
Expert in Solid State Switching Technology, has a distinguished
record of providing high quality, world class Solid State Relay and
Control Products for a variety of heating, lighting and motion control
applications. Crydom products, coupled with unparalleled technical
support, timely delivery and competitive pricing, provide Crydom’s
clients with the innovative products and support necessary to succeed
in today’s competitive and fast paced global markets.
Crydom’s extensive selection of standard off-the-shelf products
is constantly being updated and expanded through its continuous
improvement and aggressive new product development programs.
Utilizing state of the art designs, materials and technology, Crydom
offers a wide range of AC and DC output SSRs in industry standard Panel
Mount, PCB Mount and DIN Rail packages, all meeting global safety
and standards agency requirements such as CE, RoHS, UL, IEC, etc.
Bolstered by four decades of Solid State Relay operations experience,
Crydom specializes adapted and fully custom-designed SSR
products for nearly any application where unique specifications and
optimized performance are critical for success.
Crydom’s modern purpose-built 100,000 square foot manufacturing
facility houses all aspects of its ISO certified operation including
Design and Development Engineering, Manufacturing Operations
and Quality Assurance, Customer Service, Finance, Marketing and
General Management, permitting close coordination of all aspects of
Crydom’s activities. Applications Engineering and Sales support are
both performed in the field to provide Crydom’s Customers with the
unparalleled technical and commercial support.
To learn more about Crydom Solid State Switching technology and
products visit www.crydom.com or contact your authorized Crydom
Distributor or Crydom Customer Service Representative today.
www.crydom.com
ACCESSORIES
Thermal Pads Large Puck
AC
Thermal Pads Hockey Puck
AC
Page 6
The following conditions are applicable to product families where specifically noted:
]
3.
8
[3
33
]
[1
04
.4
4.
1
1
2.
25
[5
7.
2
]
1.
AC
DC
AC
DC
Page 35
are either DIN Rail or Panel Mounted depending
All dimensions in drawings are in inches
upon model selected and are available with either
[millimeters] and are for reference only.
one, two or three pre-installed single, dual or 3
B Dimensional drawings shown are for illustrative
Part
no.: HSP-6 only. They do not represent the
Part no.: HSP-1
Part no.: HSP-3
phase SSR.
purposes
DIN Rail Mount
Thermal pad for mini-puck panel mount SSRs.
25 pack of non-adhesive thermal pads for standard
Thermal pad for large puck panel mount SSRs (4 x 2.9 in).
Installing
CN(2.25
Series
SSR
does
complete
variety
of products within each
Page 49
Includes
adhesive
on one side.
hockeyGpuck
package aSSRs
x 1.75
in). in a socket that
Part no.: HSP-5 (shown above)
not (shown
have matching
input/output
specifications
series. For complete dimensional drawings forPart
a no.: HSP-2
above)
Thermal pad for large puck panel mount SSRs (4 x 2.9 in).
A B Crydom
J
Notes:
may
result hockey
in non-operation
or damage
particular
product visit the CAD Drawings
Thermal pad
for standard
puck package SSRs
Includes to
adhesive on one side.
(2.25 x 1.75either
in). Includes
adhesive
on one
the SSR,
socket
orside.
both. See socket-relay
section in the Crydom website.
A B J
Notes:SSR
Plug-In Mount
compatibility table available in CN Series
C Part Number Nomenclature is color coded Notes:
as
A B J
Page 64
datasheet.
follows:
H In addition to the possible combinations shown
Required for valid part number
in the part number nomenclature, any standard
For options only and not required for valid part
2
Assemblies
Crydom PCB Mount SIP type SSR with similar pin.9 [73.7]
number
0.6
1.7
7 [1
5 [4
Page 69
6.9
4
centers
can
be
offered
as
an
assembly.
.
5
] number combinations are available.
D Not all part
]
Contact Crydom Sales Support for information J Listed agency approvals may not apply to all part
.00
0.0
numbers available 0within
a series. To consult
on the availability of a specific
part number.
[0. 3
0
0.0
1]
[0. 3
0
Accessories
T
1]
[0. 3
agency
approvals
for
a
specific
part number
h
k
T
E Safety agency approvals
1
.
hk for SSR/Heat Sink
Th ]
.
Page
71
k.
contact Crydom Technical Support.
Assemblies may vary depending of selected SSR.
Heat sinks do not require safety agency approval. K Required external heat sink for all ratings.
DC
PCB Mount
A
F
DC
Panel Mount
Products included in this catalog are only part of the Crydom offer of Solid State Relays and Contactors. To
facilitate the use of this catalog, products have been categorized into 6 product groups mainly defined by
mounting type.
Accessories
Thermal
Pads
Mini-Puck
About
this
catalog...
The standard Crydom SSR/Heat Sink Assemblies
Complete specifications of these & other Crydom products available at: www.crydom.com
79
Applications
Although there are literally thousands of individual uses for Solid State Relays and Contactors, most can be
categorized into the following applications:
Heating Control
This encompasses the largest segment of solid state relay customers. Applications include, but are not limited
to: professional food equipment, plastic molding/extrusion machinery, HVAC&R and soldering equipment.
Benefits: Temperature accuracy, long life, no maintenance, safe product & easy to interface. Suitable for
heater, fan, blower and valve control.
Lighting Control
These applications are usually broken down into three categories: theatrical, warehouse and commercial.
Many of the products used in this segment are designed for the specific application.
Benefits: Dimming, silent operation, fast switching, long life, no maintenance, safe product, easy to interface
& reduced parts count.
Motion Control
Includes elevators, lifts, hoists, exercise equipment, conveyor systems, solar, fans, solenoid and valve control.
Benefits: Endurance, shock & vibration resistance, Soft Start, reversing, no arcing, fast switching, long life, no
maintenance, easy to interface & reduced parts count.
For technical assistance in selecting the Crydom product best suited for your application contact the nearest
Crydom Distributor, Representative, local Crydom sales office or contact Crydom Technical Support.
Solid State Relays versus Solid State Contactors
Crydom has been well known for over 40 years as a supplier of Solid
State Relays (SSRs). However, Crydom also designs, manufacturers and
markets Solid State Contactors (SSCs). What is the difference between
SSRs and SSCs?
Remarkably, there is very little actual difference. They use similar power
semiconductors and control circuits, and in some cases, even the same
housings. SSRs, being considered as components, are applied in a large
variety of applications and uses. SSCs, are generally applied in 3 phase AC
heater and motor control applications although the SSCs themselves can
be used successfully in almost any load control application. Why then are
they viewed and applied differently?
There are two main reasons: Tradition and Ratings.
Tradition is that for most AC power control applications utilizing 3 phase
AC power and some DC applications, traditional mechanical contactors
are employed. (Note: mechanical contactors rated to switch AC loads are
quite different from those rated for DC loads of similar currents due to the
arcing and contact degradation associated with making and breaking a DC
circuit). Therefore when the need arises to use solid state technology in
these type applications rather than EMRs, engineers immediately think of
Solid State “Contactors”, not Solid State “Relays”. So they are disposed to
consider SSCs rather than SSRs despite the fact that SSRs can perform
exactly the same switching function as a Contactor.
Ratings of contactors whether Solid State or Mechanical always include
allowed motor load ratings and allowed resistive load ratings. The reason
for this is again tradition in that for most mechanical contactors, the
switching capabilities and life expectancy vary significantly for each type
of load. Further, motor control requires consideration of such aspects as
Locked Rotor Rating, Full Load Current Ratings and Horse Power Rating,
while resistive load ratings must account for significant inrush current
that also degrades mechanical contacts. SSRs and SSCs don’t suffer
the same type degradation due to load characteristics as mechanical
contacts do and therefore the motor and resistive load ratings are not as
widely different. However the one significant differentiator is that to be
considered a contactor, the SSR or SSC must be evaluated to and
carry ratings appropriate for motor control.
So in summary, the major technical difference between an SSR and SSC
has to do with the mandatory motor ratings required to be defined as a
“Contactor”.
C1
B1
A1
ACT OR
SO LI D
A2
CO NT
STAT E
B2
C2
Panel Mount
Crydom Panel Mount Solid State Relays and Contactors are designed to
easily mount on panels or heat sinks for applications which require single,
dual or 3 phase output ratings in the range of 5 to 125 Amps at 24 to
660 VAC or 1 to 100 Amps at 1 to 1000 VDC. Available inputs include 24
to 280 VAC, 3 to 32 VDC or analog control depending upon model.
Offered in several configurations including three industry standard size
and mounting styles, Crydom Panel Mount SSRs and Contactors provide
both an easy means to mechanically secure them in equipment and
provide a reliable thermal path to dissipate thermal energy. Models and
options include screw termination, quick connections, optional
protective covers, input indicator LEDs and thermal interface pads,
as well as heat sinks and SSR/Heat Sink Assemblies.
See the product pages for a summary of available ratings,
features and Safety Agency approvals. Visit the SSR
Accessories and Assemblies sections of the catalog or the
Crydom website for additional information on Crydom
SSRs, Contactors and available accessories for
Panel Mount SSRs, Contactors and Assemblies.
AC Output
Page Series
Description
7
8
9
10
11
12
13
14
Series 1
HA/HD
Series H1
CW
CSW
CL
EL
EZ
280 V
15
16
17
18
19
20
21
22
MCBC
MCPC
MCTC
MCS
PCV
LPCV
RPC
SMR-6
Burst Ctrl
5
Rating Amps
10 12 15 18 20 25 40 50 75 90 110 125
Solid State Relays
530 V
660 V
HD 660 V
HD 280 V
Econ 280 V
Mini 280 V
Low Pro 660 V
Control Solid State Relays
Phase Ctrl
Temp Ctrl
Soft Start/Stop
V in Phase Ctrl
Linear Ph Ctrl
R in Phase Ctrl
Monitoring
Solid State Dual Relays
23 Evolution Duals
24 Series 1 Duals
Screw Term
25 53TP
26 53RV
3 Phase
Quick Connect
Solid State Contactors
Reversing
DC Output
Page Series
27
28
29
30
31
32
33
DC60
DC
1-DC
D06D
EL
SSC
LVD
Description
3
5
7
Rating Amps
10 12 20 25 40 60 80 100
Solid State Relays
1 - 60 V
1 - 500 V
1 - 400 V
Econ 1 - 60 V
Mini 1 - 100 V
1 - 1000 V
Disconnect
Solid State Contactors
34 DP
Reversing
PANEL MOUNT • AC Output • Relays
Panel Mount
Panel Mount
AC
10-125 Amps
PCB Mount
•  Crydom’s Signature family of Solid State Relays
•  Ratings from 10 to 125 Amps @ 24-280 VAC and from 12 to 90 Amps @ 80-530 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Flexible 3-32 VDC, 18-36 VAC or 90-280 VAC Control Voltage
12
10
E
F
P
G
Page 69
Thermal Pad
Blank: Not Included
H: Included
H
-10
Compatible
Accessories
Page 71
Output Type
-B: Normally Closed
(Not available with -10 option)
-B
Output Frecuency
Blank: 47-63 Hz
4: 400 Hz
(12 & 24 suffix only)
Operating
Voltage
12: 24-140 VAC
24: 24-280 VAC
48: 80-530 VAC
Rated Load Current
Termination
10: 10 Amps
(12 & 24 suffix only)
(12 & 24 suffix only)
Blank: Screw
25: 25 Amps
F: Quick Connect
40: 40 Amps
(Up to 50 Amps only)
50: 50 Amps
75: 75 Amps
90: 90 Amps
110: 110 Amps (24 suffix only)
125: 125 Amps (24 suffix only)
Complete specifications of these & other Crydom products available at: www.crydom.com
Input Status LED
(12 & 24 suffix only)
Blank: Not Included
G: Included
Assemblies
1.
78
A
Assemblies
Plug-In Mount
Overvoltage Protection
(12 & 24 suffix only)
Blank: Not Included
P: Included
Control Voltage
A: 90-280 VAC
D: 3-32 VDC
AxxxxE: 18-36 VAC
4
K
.2
]
J
[4
5
D
]
C
[2
6
B
1.
02
Notes: A
DIN Rail Mount
•  “Ultra-low” input current draw (2-4 mAmps DC typical)
•  Includes standard output R-C Snubber
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection
•  A pre-attached Thermal Pad can be ordered to eliminate the need for thermal grease using the “H” suffix
•  Optional Normally Closed output (“-B” suffix option)
•  UL 508 overload endurance rated
Switching Type
Blank: Zero Voltage
Turn-On
-10: Random Turn-On
2.3
1[
58
.7]
Accessories
Series 1
7
PANEL MOUNT • AC Output • Relays
HA/HD Series
12-125 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Solid State Relay with ratings from 12 to 125 Amps @ 48-660 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Flexible 3-32 VDC, 18-36 VAC or 90-280 VAC Control Voltage
•  “Ultra-low” input current draw (2-4 mAmps DC typical)
•  R-C Snubber network for additional dv/dt attenuation (for HA48/HD48 models only)
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection
•  A pre-attached Thermal Pad can be ordered to eliminate the need for thermal grease using the “H” suffix
DIN Rail Mount
Notes: A
B
C
D
J
K
Assemblies
Plug-In Mount
Page 69
Assemblies
Accessories
8
Compatible
Accessories
Series
H
A
48
25
Operating
Voltage
48: 48-530 VAC
60: 48-660 VAC
E
F
P
G
H
Rated Load Current
Termination
Input Status LED
12: 12 Amps (48 suffix only) Blank: Screw
Blank: Not Included
25: 25 Amps
F: Quick Connect
G: Included
50: 50 Amps
(Up to 50 Amps models)
75: 75 Amps (48 suffix only)
90: 90 Amps
110: 110 Amps (48 suffix only)
125: 125 Amps
8
Thermal Pad
Blank: Not Included
H: Included
1.
7
Overvoltage Protection
Blank: Not Included
P: Included
[4
5.
1.
02
Control Voltage
A: 90-280 VAC
D: 3-32 VDC
AxxxxE: 18-36 VAC
2]
[2
6
]
Page 71
-10
Switching Type
Blank: Zero Voltage
Turn-On
-10: Random Turn-On
2.3
1[
58
.7]
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Relays
Panel Mount
Panel Mount
AC
25-125 Amps
PCB Mount
•  Solid State Relay with ratings from 25 to 125 Amps @ 48-660 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Flexible 4-32 VDC Control Voltage
•  Low output off-state leakage current
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection
•  A pre-attached Thermal Pad can be ordered to eliminate the need for thermal grease using the “H” suffix
•  UL 508 overload endurance rated
K
DIN Rail Mount
J
Assemblies
Page 69
Series
H1
2WD
48
25
Operating Voltage
48: 48-530 VAC
(2D suffix only)
48-660 VAC
(2WD suffix only)
60: 48-660 VAC
(6WD suffix only)
F
02
[2
6]
Page 71
1.
Rated Load Current
25: 25 Amps
50: 50 Amps
75: 75 Amps
Transient Overvoltage
90: 90 Amps
2D: 1200 Vpk (with Snubber)
2WD: 1200 Vpk (without Snubber) 125: 125 Amps
(2D & 2WD suffixes only)
6WD: 1600 Vpk (without Snubber)
Overvoltage Protection
(2D & 2WD suffixes only) Thermal Pad
Blank: Not Included
Blank: Not Included
P: Included
H: Included
P
G
H
Termination
Input Status LED
Blank: Screw
Blank: Not Included
F: Quick Connect
G: Included
(Up to 50 Amps models)
Complete specifications of these & other Crydom products available at: www.crydom.com
Compatible
Accessories
Plug-In Mount
D
Assemblies
C
[4
5.
2]
B
1.
78
Notes: A
-10
Switching Type
Blank: Zero Voltage Turn-On
-10: Random Turn-On
2.3
1[
58
.7]
Accessories
Series H1
9
PANEL MOUNT • AC Output • Relays
CW Series
10-125 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Heavy duty Solid State Relay with ratings from 10 to 125 Amps @ 12-280 VAC or 48-660 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments
•  Flexible 3-32 VDC, 18-36 VAC or 90-280 VAC Control Voltage
DIN Rail Mount
•  LED indicator for easy identification of control status
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  IP20 “touch safe” Cover provides additional user protection
•  Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection
•  A pre-attached Thermal Pad can be ordered to eliminate the need for thermal grease using the “H” suffix
•  UL 508 overload endurance rated
Notes: A
C
D
J
K
Assemblies
Plug-In Mount
Page 69
Compatible
Accessories
24
1.
10
Accessories
Operating
Voltage
24: 24-280 VAC
48: 48-660 VAC
E
Rated Load Current
10: 10 Amps
25: 25 Amps
50: 50 Amps
90: 90 Amps
125: 125 Amps
P
H
-10
Overvoltage Protection
Blank: Not Included
P: Included
Switching Type
Blank: Zero Voltage Turn-On
-10: Random Turn-On
2.3
.3]
[58
5]
D
Thermal Pad
Blank: Not Included
H: Included
[4
4.
CW
Control Voltage
D: 4-32 VDC
A: 90-280 VAC
AxxxxE: 18-36 VAC
5
Series
29
[3
2.
9
]
Page 71
1.
7
Assemblies
10
B
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Relays
Panel Mount
Panel Mount
AC
10-90 Amps
PCB Mount
•  Heavy duty Solid State Relay with ratings from 10 to 90 Amps @ 12-280 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments
•  Flexible 3-32 VDC Control Voltage
B
C
D
J
K
Assemblies
Page 69
Compatible
Accessories
Plug-In Mount
Notes: A
DIN Rail Mount
•  Low output off-state leakage current
•  Elective R-C Snubber network for additional dv/dt attenuation
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase-control or inductive loads) output
•  Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection
•  A pre-attached Thermal Pad can be ordered to eliminate the need for thermal grease using the “H” suffix
•  UL 508 overload endurance rated
CSW
24
10
F
Rated Load Current
10: 10 Amps
25: 25 Amps
50: 50 Amps
75: 75 Amps
90: 90 Amps
P
G
Overvoltage Protection
Blank: Not Included
P: Included
Complete specifications of these & other Crydom products available at: www.crydom.com
S
H
Snubber
Blank: Not Included
S: Included
[4
5.
2]
1.
78
Thermal Pad
Blank: Not Included
H: Included
Assemblies
Series
Operating Voltage
24: 24-280 VAC
Termination
Blank: Screw
Input Status LED
F: Quick Connect
Blank: Not Included
(Up to 50 Amps models) G: Included
1.
02
[2
6]
Page 71
-10
Switching Type
Blank: Zero Voltage Turn-On
-10: Random Turn-On
2.3
1[
58
.7]
Accessories
CSW Series
11
PANEL MOUNT • AC Output • Relays
CL Series
5-10 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Economical Solid State Relay with ratings of 5 or 10 Amps @ 24-280 VAC
•  Optional IP20 “touch safe” Cover for additional user protection
•  Economical Triac based construction
•  LED indicator for easy identification of control status
•  Regulated AC or DC Control Voltage
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
Notes: A
B
C
D
J
K
DIN Rail Mount
Assemblies
Plug-In Mount
Page 69
Assemblies
Accessories
12
Compatible
Accessories
Series
CL
240
A
Load Voltage
240: 24-280 VAC
10
R
Rated Load Current
05: 5 Amps
10: 10 Amps
C
Thermal Pad
Blank: Not Included
H: Included
.5
]
[4
4
0.
89
Switching Type
Blank: Zero Voltage
Turn-On
R: Random Turn-On
1.
75
Control Voltage
A: 90-250 VAC
D: 3-32 VDC
[2
2
.5
]
Page 71
H
Cover
Blank: Not Included
C: Included
2.2
5[
57
.2]
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Relays
•  Mini-puck Solid State Relay to maximize panel space
•  Ratings up to 20 Amps @ 24-280 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive
loads) output
•  Quick Connect control & output termination for easy installation
•  3.75k VAC optical isolation
B
C
D
J
K
DIN Rail Mount
Notes: A
Panel Mount
Panel Mount
AC
5-20 Amps
PCB Mount
EL Series
Thermal Pad
Page 74
Page 79
1.
[2
83
4.
3]
[1
0.
46
Complete specifications of these & other Crydom products available at: www.crydom.com
Assemblies
0.
]
.4
1.4
0.
57
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
[6
05
[1
1.
7]
Output Voltage
240 A: 24-280 VAC
R
0.
25
5
.3
]
240A
[4
EL
17
Series
Control Voltage
05: 4-8 VDC
12: 10-14 VDC
24: 21-27 VDC
0.
Rated Load Current
5: 5 Amps
10: 10 Amps
20: 20 Amps
Plug-In Mount
Heat Sinks
1]
Page 69
[35
.6]
Accessories
Assemblies
13
PANEL MOUNT • AC Output • Relays
EZ Series
5-18 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Low profile Solid State Relay
•  Ratings from 5 to 18 Amps @ 48-600 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Elective R-C Snubber network (240 VAC models) for additional dv/dt attenuation
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  AC or DC Control Voltage options
•  Quick Connect control & output termination for easy installation
Notes: A
B
C
D
J
K
DIN Rail Mount
240
A
Accessories
Operating Voltage
240: 24-280 VAC
480: 48-660 VAC
12
.5
]
2.
62
[6
6
S
Rated Load Current
5: 5 Amps
(EZ240D suffix only)
12: 12 Amps
18: 18 Amps
R
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
[6
E
5
EZ
.4
]
Snubber
Blank: Not Included
S: Included (240 suffix only)
0.
2
Assemblies
Series
0.
5
7
[1
4.
4]
Plug-In Mount
14
Control Voltage
D: 4-15 VDC
A: 90-140 VAC
ExxxA: 18-36 VAC
ExxxD: 15-32 VDC
1.5
[38
]
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Control Relays
25-90 Amps
Panel Mount
Panel Mount
AC
MCBC Series
PCB Mount
•  Microprocessor based burst fire controller / SSR
•  Ratings from 25 to 90 Amps @ 48-530 VAC
•  R-C Snubber network for additional dv/dt attenuation
•  Industry standard analogue input (voltage or current) or potentiometer control
•  LED indicator for easy identification of output status
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Two time base periods available (10 & 20 cycles)
•  For use with resistive loads only
B
D
J
K
DIN Rail Mount
Notes: A
Page 69
MC
BC
24
C
Rated Load Current
25: 25 Amps
50: 50 Amps
90: 90 Amps
F
.2
]
[4
5
1.
78
]
8.7
1 [5
2.3
Time Base Period
F: 10 AC Cycles
L: 20 AC Cycles
1.
1
9
[3
0]
Product Type
BC: Burst Fire Controller
25
Assemblies
Series
Accessories
Line Voltage
12: 48-140 Vrms
24: 180-280 Vrms
48: 330-530 Vrms
Analog Control Signal
A: 0-5 VDC
B: 0-7 VDC
C: 0-10 VDC
D: 4-20 mA
E: Internal Potentiometer
Page 72
Plug-In Mount
Assemblies Protective Cover
Complete specifications of these & other Crydom products available at: www.crydom.com
15
PANEL MOUNT • AC Output • Control Relays
MCPC Series
25-90 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Microprocessor based phase angle controller / SSR
•  Ratings from 25 to 90 Amps @ 48-530 VAC
•  Industry standard analogue input (voltage or current) or potentiometer control for setpoint
•  LED indicator for easy identification of output status
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Designed to provide proportional AC power to a wide range of resistive loads
Notes: A
B
D
J
K
DIN Rail Mount
Assemblies Protective Cover
Series
PC
24
25
C
.2
]
[4
5
]
8.7
1 [5
2.3
Accessories
Rated Load Current
Product Type
PC: Phase-Angle Controller 25: 25 Amps
50: 50 Amps
90: 90 Amps
1.
1
9
[3
MC
Analog Control Signal
A: 0-5 VDC
B: 0-7 VDC
C: 0-10 VDC
D: 4-20 mA
E: Internal Potentiometer
0]
Assemblies
Line Voltage
12: 48-140 Vrms
24: 180-280 Vrms
48: 330-530 Vrms
Page 72
1.
78
Plug-In Mount
Page 69
16
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Control Relays
Panel Mount
Panel Mount
AC
25-90 Amps
PCB Mount
•  Microprocessor based temperature controller / SSR
•  Ratings from 25 to 90 Amps @ 48-530 VAC
•  Industry standard analogue input (voltage or current) for temperature setpoint
•  Direct J or K Thermocouple input
K
Assemblies
Page 69
Line Voltage
24: 24-280 Vrms
48: 48-530 Vrms
Series
MC
TC
24
25
Thermocouple Type
J: Type J
K: Type K
J
A
E
Temperature Range
L: 100°F to 500°F, 38°C to 260°C
H: 300°F to 700°F, 149°C to 371°C
VH: 500°F to 900°F, 260°C to 482°C
EH: 700°F to 1100°F, 371°C to 593°C
R: +100°F to -100°F, +38°C to -73°C
1.
78
[4
5.
2
]
Aditional Features
E: 5 VDC regulated
output for external
setpoint
(setpoint A option only)
Page 72
]
8.7
1 [5
2.3
1.
Product Type
Rated Load Current
TC: Temperature Controller 25: 25 Amps
50: 50 Amps
90: 90 Amps
L
Setpoint Input
A: 0-5 VDC
B: 0.7 VDC
C: 0-10 VDC
D: 4-20 mA
Protective Cover
Plug-In Mount
J
Assemblies
D
0]
C
[3
B
19
Notes: A
DIN Rail Mount
•  LED indicators for easy identification of output and temperature status
•  Open Thermocouple protection
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available Temperature Range option “R” for refrigeration cycle including 2 minute short cycle protection
•  Option “E” provides a regulated 5 V/10 mAmps source for use with external potentiometer control
Accessories
MCTC Series
Complete specifications of these & other Crydom products available at: www.crydom.com
17
PANEL MOUNT • AC Output • Control Relays
MCS Series
25-90 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Microprocessor based Soft Start / Soft Stop controller / SSR
•  Ratings from 25 to 90 Amps @ 48-530 VAC
•  R-C Snubber network for additional dv/dt attenuation
•  Industry standard analogue input (voltage or current) or potentiometer control
•  LED indicator for easy identification of output status
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Adjustable ramp rates
Notes: A
B
D
J
K
DIN Rail Mount
Assemblies Protective Cover
MC
ST
24
Accessories
Product Type
ST: Soft Start
SP: Soft Stop
SS: Soft Start/Stop
25
C
Rated Load Current
25: 25 Amps
50: 50 Amps
90: 90 Amps
S
2]
[4
5.
8
]
8.7
1 [5
2.3
Ramp Time On/Off
S: 100 ms-1 sec
M: 1 sec-10 sec
[3
0]
Series
1.
18
Assemblies
18
Line Voltage
12: 48-140 Vrms
24: 180-280 Vrms
48: 330-530 Vrms
Analog Control Signal
A: 0-5 VDC
B: 0-7 VDC
C: 0-10 VDC
D: 4-20 mA
E: Internal Potentiometer
Page 72
1.
7
Plug-In Mount
Page 69
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Control Relays
15-90 Amps
Panel Mount
Panel Mount
AC
PCV Series
B
D
J
K
Page 69
Compatible
Accessories
10
PCV
Control Voltage
7: 2-7 VDC
10: 2-10 VDC
Operating Voltage
24: 100-240 VAC
24
[4
5.
2]
Assemblies
Series
1.
78
1.
02
[2
6]
Page 71
25
Rated Load Current
15: 15 Amps
25: 25 Amps
50: 50 Amps (10 prefix only)
75: 75 Amps (10 prefix only)
90: 90 Amps (10 prefix only)
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
PCB Mount
•  Easy to use proportional (phase angle) controller
•  Ratings from 15 to 90 Amps @ 100-240 VAC
•  Simple 2-7 VDC or 2-10 VDC analogue Control Voltage
•  Designed to provide proportional AC power to a wide range of resistive loads
19
PANEL MOUNT • AC Output • Control Relays
LPCV Series
15-110 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Easy to use linear proportional (phase angle) controller
•  Ratings from 15 to 110 Amps @ 20-300 VAC
•  Simple 0-5 VDC, 0-10 VDC or 4-20 mAmps analogue Control Voltage
•  Included 12 VDC source for use with external potentiometer control
•  Requires accessory power supply PS120 or PS240 to provide 20 VAC for logic internal logic circuit
•  Designed to provide proportional AC power to a wide range of resistive loads
Notes: A
B
D
J
K
DIN Rail Mount
2.
19
[5
5.
5
]
Plug-In Mount
Series
Assemblies
10
LPCV
24
25
Rated Load Current
15: 15 Amps
25: 25 Amps
40: 40 Amps
75: 75 Amps
110: 110 Amps
3[
76
5
0.2
]
[6.4
.2]
1.
6
1
[4
0.
9]
Accessories
Control Voltage
5: 0-5 VDC
10: 0-10 VDC
20: 4-20 mAmps
Operating Voltage
24: 20-300 VAC
20
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Control Relays
RPC Series
Panel Mount
Panel Mount
AC
15-40 Amps
B
D
J
K
Page 69
Compatible
Accessories
RPC
24
[4
5.
2]
Assemblies
Series
Operating Voltage
12: 90-130 VAC
24: 200-240 VAC
48: 400-480 VAC
1.
78
1.
02
[2
6]
Page 71
25
Rated Load Current
15: 15 Amps
25: 25 Amps
40: 40 Amps
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
PCB Mount
•  Easy to use proportional (phase angle) controller
•  Ratings from 15 to 40 Amps @ 130 VAC, 240 VAC or 480 VAC
•  Simple 150k or 1M Ohm potentiometer control
•  Designed to provide proportional AC power to a wide range of resistive loads
21
PANEL MOUNT • AC Output • Control Relays
SMR-6 Series
25-90 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Solid State Relay with built-in current monitoring & diagnostics circuit
•  Ratings from 25 to 90 Amps @ 60-280 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Inverting or non-inverting Control Voltage (flexible 8-32 VDC)
•  Normally Open or Normally Closed alarm output
•  Wide range of built-in fault condition monitoring alarms
•  Zero Voltage Turn-On (resistive loads) output
•  UL 508 overload endurance rated
DIN Rail Mount
Notes: A
B
D
J
K
Assemblies
Protective Cover
Page 72
]
8.7
1 [5
2.3
Features
Input: Inverting or Non Inverting
Alarm Output: Normally Open or Normally Closed
1.
37
Accessories
Operating Voltage
24: 60-280 VAC
48: 96-553 VAC
-6
]
25
4.
7
24
[3
Assemblies
Rated Load Current
25: 25 Amps
50: 50 Amps
90: 90 Amps
Series
SMR
1.
78
[4
5.
2
]
Plug-In Mount
Page 69
22
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Dual Relays
Evolution Dual Series
•  4-15 VDC & 15-32 VDC or flexible 4-32 VDC Control Voltage
•  Four Input Connector options for additional assembly flexibility
•  LED indicator for each output channel for easy identification of control status
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
C
D
J
K
DIN Rail Mount
B
Input
Connector
options
Rated Load Current
25: 25 Amps
50: 50 Amps
1
V
R
5.
7
[4
1.
8
H
Input Connector
Switching Type
Blank: Zero Voltage Turn-On
1: 4 Pin Standard
2: Key Locking Connector R: Random Turn-On
3: 4 Pin Connector
accepting Screw Terminals
4: 4 Pin Spring Terminal
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
Assemblies
D
.3]
[58
]
1.2
4 [1
0.4
Accessories
Cover
C: Included
D: Not Included
25
]
24
5.
1
D
Thermal Pad
Blank: Not Included
H: Included
[2
C
Option 4
99
Series
Control Voltage
D: 4-15 VDC
E: 15-32 VDC
W: 4-32 VDC
Option 3
0.
Operating Voltage
24: 24-280 VAC
48: 48-660 VAC
Output Terminal
Orientation
U: A channel top,
B channel bottom
V: A channel on left,
B channel on right
Option 2
]
Option 1
Plug-In Mount
Notes: A
PCB Mount
•  Independently controlled dual output Solid State Relay
•  Ratings of 25 & 50 Amps @ 24-280 VAC or 48-600 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Optional IP20 “touch safe” Cover for additional user protection
Panel Mount
Panel Mount
AC
25-50 Amps
23
PANEL MOUNT • AC Output • Dual Relays
Series 1 Duals
25-40 Amps
Panel Mount
Panel Mount
AC
PCB Mount
•  Independently controlled dual output Solid State Relay
•  Ratings of 25 Amps & 40 Amps @ 24-280 VAC or 48-530 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  4-15 VDC or 15-32 VDC Control Voltage
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  Quick Connect termination; 120/240 V models include pin control termination
•  UL 508 overload endurance rated
Notes: A
B
C
D
J
K
DIN Rail Mount
120/240 V Model
480 V Model
Plug-In Mount
(D24)
Assemblies
(H12D48)
Heat Sinks &
other Accessories
Page 69
[6
25
Series
Thermal Pad
Blank: Not Included
H: Included
H12D48
25
Accessories
Operating Voltage
D24: 24-280 VAC
H12D48: 48-530 VAC
D
H
Control Voltage
D: 4-15 VDC
DE: 15-32 VDC
-10
0.
Assemblies
Rated Load Current
25: 25 Amps
40: 40 Amps
.4
]
1.
78
[4
0.
5.
2
86
]
[2
1.
8
]
Page 73
2.3
Switching Type
Blank: Zero Voltage Turn-On
-10: Random Turn-On
1[
58
.7]
.9]
5 [8
0.3
24
Specifications are subject to change without prior notice
PANEL MOUNT • AC Output • Contactors
25-50 Amps
Panel Mount
Panel Mount
AC
53TP Series
•  3 Phase Solid State Contactor with ratings of 25 & 50 Amps per phase @ 48-530 VAC
•  Up to 7.5 HP / 5.5 kW Motor Controller ratings
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial
PCB Mount
applications
DIN Rail Mount
•  EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments
•  Direct Bond Copper (DBC) substrate for superior thermal performance
•  R-C Snubber network for additional dv/dt attenuation
•  Flexible 4-32 VDC, 18-36 VAC or 90-140 VAC / 180-280 VAC Control Voltage
•  LED indicator for easy identification of control status
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive
loads) output
•  Optional IP20 “touch safe” Cover (shown) provides additional user protection
•  Internal TVS eliminates the need for external Overvoltage Protection
•  A pre-attached Thermal Pad can be ordered to eliminate the need for
Assemblies
Page 69
K
53TP
25
Control Voltage
A: 90-280 VAC (without IP20 cover)
B: 90-140 VAC (with IP20 cover)
C: 180-280 VAC (with IP20 cover)
D: 4-32 VDC
E: 18-36 VAC (with IP20 cover)
D
H
Cover
D: Not Included (IP00)
C: Included (IP20)
-10
4.
12
A
3.1
4[
Switching Type
Blank: Zero Voltage Turn-On
-10: Random Turn-On
Complete specifications of these & other Crydom products available at: www.crydom.com
2.8
9[
73
.5]
IP20
79
.8]
Accessories
Assemblies
4.
09
[1
04
]
1.
4
[3
5.
5]
Page 76
[1
0
Thermal Pad
Blank: Not Included
H: Included
Heat Sinks &
other Accessories
4.
6]
J
]
D
[2
9.
7
C
17
Series
Rated Load Current
25: 25 Amps
50: 50 Amps
B
1.
Notes: A
Plug-In Mount
thermal grease using the “H” suffix
•  UL 508 overload endurance rated
IP00
25
PANEL MOUNT • AC Output • Contactors
53RV Series
25-50 Amps
Panel Mount
Panel Mount
AC
•  Motor Reversing Contactor with ratings of 25 & 50 Amps per phase @ 48-530 VAC
•  Up to 7.5 HP / 5.5 kW Motor Controller ratings
•  Built-in interlock circuit protects the relay/load if both Forward & Reverse inputs are
PCB Mount
simultaneously actuated
DIN Rail Mount
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  EMC compliant (LEVEL 3) for reliable operation in harsh electrical environments
•  Direct Bond Copper (DBC) substrate for superior thermal performance
•  R-C Snubber network for additional dv/dt attenuation
•  Flexible 4-32 VDC Control Voltage
•  LED indicators for easy identification of the Forward / Reverse control status
•  IP20 “touch safe” Cover provides additional user protection
•  A pre-attached Thermal Pad can be ordered to eliminate the need for
thermal grease using the “H” suffix
•  UL 508 overload endurance rated
Assemblies
Accessories
26
B
C
D
J
K
Assemblies
Page 69
Heat Sinks &
other Accessories
Page 76
Series
D
53
Control Voltage
D: 4-32 VDC
Type
RV: 3 Phase Motor
Reversing SSR
RV
25
4.
09
[1
04
]
1.
4
[3
5.
5]
Plug-In Mount
Notes: A
Cover
C: Included
C
H
Rated Load Current/phase Thermal Pad
25: 25 Amps
Blank: Not Included
50: 50 Amps
H: Included
3.1
4[
79
.8]
Specifications are subject to change without prior notice
PANEL MOUNT • DC Output • Relays
3-7 Amps
Panel Mount
Panel Mount
DC
DC60 Series
PCB Mount
•  Economical bipolar transistor output Solid State Relay
•  Ratings up to 7 Amps @ 60 VDC
•  Available with either a Normally Open (standard) or Normally Closed (“-B” option) output
•  Flexible 3.5-32 VDC or 90-280 VAC/DC Control Voltage
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
must be diode suppressed)
B
C
D
J
K
Page 69
Compatible
Accessories
2]
[4
5.
1.
7
8
1.
0
2
[2
6]
Page 71
DC60
SA
3
Output Type
Blank: Normally Open
-B: Normally Closed
Assemblies
Series
Control Voltage
S: 3.5-32 VDC
SA: 90-280 VAC
-B
Rated Load Current
3: 3 Amps
5: 5 Amps
7: 7 Amps
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
27
PANEL MOUNT • DC Output • Relays
DC Series
10-100 Amps
Panel Mount
Panel Mount
DC
•  Solid State Relay with ratings up to 100 Amps @ 60 VDC, 100 Amps @ 100 VDC, 60 Amps @ 200 VDC and
20 Amps @ 400 VDC
PCB Mount
•  Logic compatible control options of either 4 to 32 VDC or 90 to 140 VAC
•  Optional IP20 “touch safe” Cover for additional user protection & thermal interface pad
•  Optically isolated high speed trigger circuit for enhanced switching
•  Easily paralleled for high current applications
•  Low impedance MOSFET output minimizes total power dissipation
•  LED indicator for easy identification of control status
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
DIN Rail Mount
must be diode suppressed)
•  UL General Use (resistive) ratings
Notes: A
B
C
D
J
K
Assemblies
Plug-In Mount
Page 69
Assemblies
DC
100
A
Accessories
Operating Voltage
60: 7-48 VDC
100: 7-72 VDC
200: 7-150 VDC
400: 7-300 VDC
40
C
[4
5.
2]
1.
78
Thermal Pad
Blank: Not Included
H: Included
2
Cover
Blank: Not
Included
C: Included
1.
0
Control Voltage
A: 90-140 VAC
D: 4-32 VDC
[2
6]
Page 71
Series
28
Compatible
Accessories
H
Rated Load Current
10: 10 Amps
20: 20 Amps (Not valid with 400A suffix)
40: 40 Amps (Not valid with 400x suffixes)
60: 60 Amps (Not valid with 200A, 400x suffixes)
80: 80 Amps (60D & 100D suffixes only)
100: 100 Amps (60D & 100D suffixes only)
2.3
1[
58
.7]
Specifications are subject to change without prior notice
PANEL MOUNT • DC Output • Relays
•  Solid State Relay with low impedance MOSFET output to minimize total power dissipation
•  Ratings up to 100 Amps @ 100 VDC, 40 Amps @ 200 VDC, 12 Amps @ 400 VDC,and 10 Amps @ 500 VDC
•  Easily paralleled for high current applications
•  Flexible 3.5-32 VDC Control Voltage
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils must
be diode suppressed)
B
D
J
K
Page 69
D
1D
.2
]
[4
5
1.
78
1.
02
[2
6]
Page 71
Assemblies
Series
Operating Voltage
1D: 0-100 VDC
2D: 0-200 VDC
4D: 0-400 VDC
5D: 0-500 VDC
Compatible
Accessories
07
Rated Load Current
07: 7 Amps
10: 10 Amps (500 VDC only)
12: 12 Amps (not for 500 VDC)
20: 20 Amps (100 VDC only)
40: 40 Amps (100 & 200 VDC only)
60: 60 Amps (100 VDC only)
80: 80 Amps (100 VDC only)
100: 100 Amps (100 VDC only)
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
Panel Mount
Panel Mount
DC
7-100 Amps
PCB Mount
1-DC Series
29
PANEL MOUNT • DC Output • Relays
D06D Series
60-100 Amps
Panel Mount
Panel Mount
DC
PCB Mount
•  Solid State Relay with low impedance MOSFET output to minimize total power dissipation
•  Ratings from 60 to 100 Amps @ 60 VDC
•  Easily paralleled for high current applications
•  Flexible 3.5-32 VDC Control Voltage
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
must be diode suppressed)
Notes: A
B
D
J
K
DIN Rail Mount
Assemblies
Plug-In Mount
Page 69
Assemblies
Accessories
30
Compatible
Accessories
[4
5.
2]
1.
78
1.
02
[2
6]
Page 71
Series
D
Operating Voltage
06D: 0-60 VDC
06D
60
Rated Load Current
60: 60 Amps
80: 80 Amps
100: 100 Amps
2.3
1[
58
.7]
Specifications are subject to change without prior notice
PANEL MOUNT • DC Output • Relays
5-10 Amps
Panel Mount
Panel Mount
DC
EL Series
PCB Mount
•  Mini-puck Solid State Relay to maximize panel space
•  Ratings of 5 & 10 Amps @ 3-100 VDC
•  Easily paralleled for high current applications
•  Low impedance MOSFET output minimizes total power dissipation
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
must be diode suppressed)
•  Quick Connect control & output termination for easy installation
B
D
J
K
DIN Rail Mount
Notes: A
Thermal Pad
Page 74
Page 79
4.
3]
[1
0.
57
[1
1.
7]
0.
46
Complete specifications of these & other Crydom products available at: www.crydom.com
Assemblies
0.
83
1.4
0.
17
Output Voltage
100D: 3-100 VDC
]
05
.4
5
[6
100D
0.
25
EL
.3
]
Series
Control Voltage
05: 4-8 VDC
12: 10-14 VDC
24: 21-27 VDC
[4
Rated Load Current
5: 5 Amps
10: 10 Amps
Plug-In Mount
Heat Sinks
[2
1.
1]
Page 68
[35
.6]
Accessories
Assemblies
31
PANEL MOUNT • DC Output • Relays
SSC Series
25 Amps
Panel Mount
Panel Mount
DC
•  Solid State Relay with ratings of 25 Amps @ up to 1k VDC
•  High voltage IGBT output
•  Internal TVS included in 800 VDC model eliminates the need for external Overvoltage Protection
PCB Mount
(800 suffix only)
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
must be diode suppressed)
Notes: A
B
D
J
K
DIN Rail Mount
Assemblies
Plug-In Mount
Page 69
Assemblies
Accessories
32
Compatible
Accessories
[4
5.
2]
1.
78
1.
02
[2
6]
Page 71
Rated Load Current
25: 25 Amps
Series
SSC
800
Operating Voltage
800: 0-800 VDC
1000: 0-1000 VDC
25
24
Control Voltage
12: 8-16 VDC
24: 20-28 VDC
36: 32-40 VDC
2.3
1[
58
.7]
Specifications are subject to change without prior notice
PANEL MOUNT • DC Output • Relays
40-100 Amps
Panel Mount
Panel Mount
DC
LVD Series
•  Low Voltage Disconnect with ratings up to 100 Amps @ 3-75 VDC
•  Monitors and automatically disconnects battery systems from loads at low voltage conditions to
prevent deep discharge of the batteries
PCB Mount
•  Low impedance MOSFET output minimizes total power dissipation
•  Six DC control ranges available for a variety of 12 VDC and 24 VDC battery systems
B
C
D
J
K
Page 69
Compatible
Accessories
LVD
Operating Voltage
75: 3-75 VDC
75
A
40
1.
02
[4
5.
2]
1.
78
Assemblies
Series
Rated Load Current
40: 40 Amps
60: 60 Amps Thermal Pad
80: 80 Amps Blank: Not Included
100:100 Amps H: Included
[2
6]
Page 71
H
Control Voltage Code
A: 18 VDC max., Hysteresis 11.0-11.5 VDC
B: 18 VDC max., Hysteresis 11.5-12.0 VDC
C: 18 VDC max., Hysteresis 12.0-12.5 VDC
D: 36 VDC max., Hysteresis 23.0-24.0 VDC
E: 36 VDC max., Hysteresis 24.0-25.0 VDC
F: 36 VDC max., Hysteresis 25.6-26.6 VDC
Complete specifications of these & other Crydom products available at: www.crydom.com
2.3
1[
58
.7]
Accessories
Assemblies
Plug-In Mount
DIN Rail Mount
Notes: A
33
PANEL MOUNT • DC Output • Contactors
DP Series
20-60 Amps
Panel Mount
Panel Mount
DC
•  Motor Reversing Contactor with ratings up to 60 Amps @ 48 VDC
•  Low impedance MOSFET switches in an H-Bridge configuration for motor reversing
•  Control features to combine Soft Start/Ramp Up, Soft Stop/Ramp Down & Braking functions
PCB Mount
on each polarity
•  Built-in interlock circuit protects the relay/load if both Forward & Reverse inputs are simultaneously
actuated
•  UL & IEC General Use & Motor Controller ratings
•  LED indicators for easy identification of the Forward / Reverse control status
K
Assemblies
Series
DP
4R
SB
Accessories
Function
4R: 4 Channel DC Reversing
60
D
Operating Voltage
60: 48 VDC
40
B
Load Rated Current
20: 20 Amps
40: 40 Amps
60: 60 Amps
Assemblies
Compatible
Accessories
Page 69
Page 71
]
[1
04
Start Mode
Blank: Instant Start
SA: Soft Start/Ramp Up, 0.2 sec Control Voltage
SB: Soft Start/Ramp Up, 0.5 sec D: 4.5-15 VDC
E: 18-32 VDC
SC: Soft Start/Ramp Up, 1 sec
Stop Mode
Blank: Stop Mode matches Start Mode
B2: Dynamic Brake, 0.2 sec
B5: Dynamic Brake, 0.5 sec
B8: Dynamic Brake, 0.8 sec
B: Dynamic Brake, Continuous
40 & 60 Amps
Model
9
J
4.
0
D
[3
5.
1]
C
20 Amps
Model
Plug-In Mount
34
B
1.
38
DIN Rail Mount
Notes: A
H
Thermal Pad
Blank: Not Included
H: Included
2.8
9[
73
.5]
Specifications are subject to change without prior notice
PCB Mount
Crydom offers an extensive line of PCB Mount Solid State Relays including the popular industry standard
footprint SIP, Mini SIP and DIP configurations and most Crydom SIP type SSRs are also offered as DIN
Rail mountable Assemblies.
Models are available for applications requiring ratings from 1 to 25 Amps at 24 to 660 VAC or 1 to 20
Amps at 1 to 200 VDC. Inputs are available covering 24 to 140 VAC or 3 to 32 VDC depending upon model.
Excepting some AC output models rated greater than 10 Amps where forced air is used for improved
output ratings (forced air is not required for DC output), all Crydom PCB Mount Relay output ratings are
based upon free air and 40 °C ambient.
See the product pages for a summary of available package size and pin out, ratings, features and
Safety Agency approvals. Visit the SSR Assemblies section of the catalog or the Crydom website for
additional information on Crydom PCB Mount SSRs and Assemblies.
AC Output
Page Series
36
37
38
39
40
41
42
43
44
45
ASO
LC
MP
CX
MCX
LS
PF
SPF
DPA
SDV
Description
46 DMO
47 CMX
48 MP
1.5
2
3
Rating Amps
4 5 8 12 25
Solid State Relays
Mini SIP
Mini SIP
SIP
SIP
SIP
SIP
SIP
SIP
DIP
DIP
DC Output
Page Series
1
Description
Mini SIP
SIP
SIP
Rating Amps
3 5 6 10 20
Solid State Relays
PCB MOUNT • AC Output • Relays
ASO Series
1.5-2 Amps
Panel Mount
PCB Mount
PCB Mount
AC
•  Compact design Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 2 Amps @ 12-280 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive
loads) output
•  Solderable 0.015” x 0.030” pins can also plug fit SIP type IC socket
Notes: A
B
C
D
J
DIN Rail Mount
0.
93
[2
3.
6
]
0.
16
[3
.9
]
Plug-In Mount
Assemblies
Series
ASO
Rated Load Current
241: 1.5 Amps
242: 2 Amps
241
R
0.2
0.5
[5.1
.6]
0.2
4[
0.0
3[
36
[12
]
2] ]
5. .8
[1 [17
60 0
0. 0.7
Accessories
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
6]
0.8
]
Specifications are subject to change without prior notice
PCB MOUNT • AC Output • Relays
LC Series
Panel Mount
1.5-2 Amps
PCB Mount
PCB Mount
AC
•  Compact design Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 2 Amps @ 12-280 VAC
•  4-10 VDC Control Voltage
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive
loads) output
B
C
D
J
0.
9
5
[2
4.
1]
0.
2
[5
.1
Plug-In Mount
]
DIN Rail Mount
Notes: A
LC
24
1
0.5
[12
.7]
0
40
0.
]
.1
[5
Switching type
Blank: Zero Voltage Turn-On
R: Random Turn-On
2
0.
Operating Voltage
24: 12-280 VAC
R
2
0.
[1
]
0.2
10
0.
5[
2
0
0.
]
.5
[2
6.4
Accessories
Series
Assemblies
Rated Load Current
1: 1.5 Amps
2: 2 Amps
]
]
.4
[0
Complete specifications of these & other Crydom products available at: www.crydom.com
37
PCB MOUNT • AC Output • Relays
MP Series
3-4 Amps
Panel Mount
PCB Mount
PCB Mount
AC
•  SIP Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 4 Amps @ 24-280 VAC
•  Control Voltage of 3-32 VDC
•  10 mm plastic housing allows for operation at -40ºC
Notes: A
B
D
J
DIN Rail Mount
DIN Rail Model
Assemblies
Page 77
0.
[1
4
1.
6
7
[4
2.
4]
0.
Series
MP
Operating Voltage
120: 12-140 VAC
240: 24-280 VAC
240
D
Rated Load Current
3: 3 Amps
4: 4 Amps (240 suffix only)
3
Control Voltage
D: 3-32 VDC
1[
25
.4]
40
0.
0
.7] 0.2
12
0[
0.5
2]
0.
[1
Accessories
]
.1
[5
38
Sockets
2]
Plug-In Mount
Page 51
0.2
5[
6.4
]
Specifications are subject to change without prior notice
PCB MOUNT • AC Output • Relays
Panel Mount
5 Amps
•  SIP Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 5 Amps @ 48-660 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  High surge current rating
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  AC or DC Control Voltage options
B
C
D
J
DIN Rail Mount
Notes: A
PCB Mount
PCB Mount
AC
CX Series
E
240
D
.7
]
6
[4
1
5
1.
R
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
0.2
0.9
[5.1
]
[22
.9]
70
0.
9
8] 7.
7. [2
[1 .10
1
0.3
5[
]
Control Input Type
Control Voltage
Blank: 3-15 VDC
D: DC Input
(240 & D suffix only) A: AC Input
4-15 VDC
(380/480 & D suffix only)
90-140 VAC (A suffix only)
E: 15-32 VDC (D suffix only)
18-36 VAC (A suffix only)
Assemblies
CX
Rated Load Current
5: 5 Amps
0.0
Accessories
Series
Page 77
Page 51
Plug-In Mount
0
0. .3 [
25 7.
[6 6]
.4
]
Operating Voltage
240: 12-280 VAC
380: 48-530 VAC
480: 48-660 VAC
Sockets
DIN Rail Model
8.9
]
4[
Complete specifications of these & other Crydom products available at: www.crydom.com
1]
39
PCB MOUNT • AC Output • Relays
MCX Series
5 Amps
Panel Mount
PCB Mount
PCB Mount
AC
•  SIP Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 5 Amps @ 48-660 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  High surge current rating
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  AC or DC Control Voltage options
•  10 mm plastic housing allows for operation at -40ºC
Notes: A
B
C
D
J
DIN Rail Mount
DIN Rail Model
2]
Page 77
Assemblies
Series
E
240
D
[4
1.
67
R
25
0
.7] 0.2
12
0[
0.5
2]
0.
Rated Load Current
5: 5 Amps
1[
.4]
[1
]
.1
[5
Operating Voltage
240: 12-280 VAC
380: 48-530 VAC
480: 48-660 VAC
5
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
40
0.
Accessories
MCX
Control Voltage
Blank: 3-15 VDC
(240 & D suffix only)
4-15 VDC
(380/480 & D suffix only)
90-140 VAC (A suffix only) Control Input Type
E: 15-32 VDC (D suffix only)
D: DC Input
18-36 VAC (A suffix only)
A: AC Input
2.
4]
0.
4
[1
0.
Plug-In Mount
40
Sockets
Page 51
0.2
5[
0.0
4[
1]
6.4
]
Specifications are subject to change without prior notice
PCB MOUNT • AC Output • Relays
8-12 Amps
Panel Mount
LS Series
PCB Mount
PCB Mount
AC
•  SIP Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 12 Amps @ 24-280 VAC with external heat sink
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-on (phase control or inductive
loads) output
B
C
D
J
Control Input Type
D: DC Input
R
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
1.2
2[
.3]
7 [4
0.1 0.3
[7.6
]
31
]
Assemblies
12
8]
7. ]
[1 2.9
70 [2
0. .90
0
Control Voltage
Blank: 4-10 VDC
E: 20-28 VDC
D
]
240
3.
1
E
[1
LS
52
Series
Rated Load Current
8: 8 Amps
12: 12 Amps
0.
Operating Voltage
240: 24-280 VAC
Accessories
1.
39
[3
5.
3]
Plug-In Mount
DIN Rail Mount
Notes: A
Pin Terminal
0.032 sq
(4 places)
Complete specifications of these & other Crydom products available at: www.crydom.com
41
PCB MOUNT • AC Output • Relays
PF Series
25 Amps
Panel Mount
PCB Mount
PCB Mount
AC
•  SIP Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 10 (convection) or 25 Amps (forced air flow) @ 48-660 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive
loads) output
•  AC or DC Control Voltage options
Notes: A
B
C
D
J
DIN Rail Mount
DIN Rail Model
Page 77
Assemblies
PF
E
240
D
1.
64
[4
0.
1.
85
7]
[2
1.
5]
Plug-In Mount
Operating Voltage
240: 12-280 VAC
380: 48-530 VAC
480: 48-660 VAC
Series
Rated Load Current
25: 25 Amps
25
Control Input Type
Control Voltage
D: DC Input
Blank: 3-15 VDC
(240 & D suffix only) A: AC Input
4-15 VDC
(380/480 D suffix only)
90-140 VAC (A suffix only)
E: 15-32 VDC (D suffix only)
18-36 VAC (A suffix only)
R
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
0.4
1.3
3[
[10
.2]
9]
2. ]
[2 7.9
90 [2
0. .10
1
Accessories
42
Sockets
Page 51
0.3
0.0
5[
4[
1]
33
.7]
8.9
]
Specifications are subject to change without prior notice
PCB MOUNT • AC Output • Relays
SPF Series
loads) output
•  AC or DC Control Voltage
B
C
D
J
DIN Rail Mount
Notes: A
PCB Mount
PCB Mount
AC
•  SIP Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 10 (convection, vertical or horizontal mounting) or 25 Amps (forced air flow) @ 48-660 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive
Panel Mount
25 Amps
Sockets
Page 77
1.
64
[4
0.
1.
86
7]
[2
1.
7]
Page 51
SPF
E
240
D
Rated Load Current
25: 25 Amps
25
R
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
Complete specifications of these & other Crydom products available at: www.crydom.com
0.4
1.4
5[
[10
.2]
9]
2. ]
[2 7.9
90 [2
0. .10
1
Control Voltage
Control Input Type
Blank: 3-15 VDC (for 240)
D: DC Input
4-15 VDC (for 380/480) A: AC Input
E: 15-32 VDC
18-36 VAC
Assemblies
Series
0.3
36
.8]
Accessories
Operating Voltage
240: 12-280 VAC
380: 48-530 VAC
480: 48-660 VAC
Plug-In Mount
DIN Rail Model
[7.
6]
43
PCB MOUNT • AC Output • Relays
DPA Series
1 Amp
Panel Mount
PCB Mount
PCB Mount
AC
•  DIP Solid State Relay ideally suited for high density PCB applications
•  Ratings to 1 Amp @ 280 VAC
•  Control options include 3.5-10 VDC or 10-35 mAmps DC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  Solderable Pin layout fits IC grid pattern and pluggable IC DIP type sockets
Notes: A
B
D
J
DIN Rail Mount
Plug-In Mount
0.2
2[
19
1.
6]
41
]
[2
DPA
5.5
.6
]
[6
26
0.
58
0.
]
.4
7] 17
4. [
[1 0.69
Accessories
44
Control Voltage
11: 10-35 mA DC
19: 3.5-10 VDC
0.
85
Assemblies
Series
Operating Voltage
41: 20-140 VAC
61: 20-280 VAC
0.2
2[
5.6
]
Specifications are subject to change without prior notice
PCB MOUNT • AC Output • Relays
SDV Series
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  Solderable Pin layout fits IC grid pattern and pluggable IC DIP type sockets
B
C
D
J
2[
]
.4
7] 17
4. [
[1 0.69
Complete specifications of these & other Crydom products available at: www.crydom.com
Assemblies
.6
]
[6
58
0.
Rated Load Current
15: 1.5 Amps
0.
26
R
]
15
1.
6
24
[2
SDV
Operating Voltage
24: 12-280 VAC
]
0.
85
Series
5.5
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
0.2
2[
5.6
]
Accessories
0.2
Plug-In Mount
DIN Rail Mount
Notes: A
PCB Mount
PCB Mount
AC
•  DIP Solid State Relay ideally suited for high density PCB applications
•  Ratings to 1.5 Amps @ 280 VAC
•  Control Voltage of 3.5-10 VDC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
Panel Mount
1.5 Amps
45
PCB MOUNT • DC Output • Relays
DMO Series
3 Amps
Panel Mount
PCB Mount
PCB Mount
DC
•  Compact design Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 3 Amps @ 60 VDC
•  3-10 VDC Control Voltage
•  Low impedance MOSFET output minimizes total power dissipation
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
must be diode suppressed)
•  Solderable 0.015” x 0.030” pins can also plug fit SIP type IC socket
Notes: A
B
D
J
DIN Rail Mount
0.
9
3
[2
3.
6]
0.
2
[5
]
Plug-In Mount
Assemblies
Series
DMO
Rated Load Current
063: 3 Amps
063
0.5
[12
.6]
[5.1
]
2] ]
5. .8
[1 [17
60 0
0. 0.7
Accessories
0.2
0.2
7[
0.0
3[
6.8
46
]
0.8
]
Specifications are subject to change without prior notice
PCB MOUNT • DC Output • Relays
3-20 Amps
Panel Mount
CMX Series
PCB Mount
PCB Mount
DC
•  SIP Solid State Relay ideally suited for high density PCB applications
•  Low impedance MOSFET output minimizes total power dissipation
•  Ratings up to 20 Amps @ 60 VDC, 10 Amps @ 100 VDC or 3 Amps @ 200 VDC
•  Easily paralleled for high current applications
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
must be diode suppressed)
B
C
D
J
DIN Rail Mount
Notes: A
Sockets
Page 77
0.
28
[7
.1
]
Page 60
E
200
D
[4
1.
7]
Assemblies
CMX
5
0.2
0.9
0[
[5.1
]
0
7
0.
22
.9]
]
9
8] 7.
7. [2
[1 .10
1
Control Voltage
Control Input Type
Blank: 3-10 VDC
D: DC Input
4-10 VDC (200 VDC only)
E: 20-28 VDC
Accessories
Series
1.
64
Operating Voltage
60: 0-60 VDC
100: 0-100 VDC
200: 0-200 VDC
Rated Load Current
3: 3 Amps (200 VDC only)
5: 5 Amps (60 VDC only)
6: 6 Amps (100 VDC only)
10: 10 Amps (60 & 100 VDC only)
20: 20 Amps (60 VDC only)
Plug-In Mount
DIN Rail Model
0.0
4[
Complete specifications of these & other Crydom products available at: www.crydom.com
1]
47
PCB MOUNT • DC Output • Relays
MP Series
3 Amps
Panel Mount
PCB Mount
PCB Mount
DC
•  SIP Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 3 Amps @ 60 VDC
•  10 mm plastic housing allows for operation at -40ºC
•  Normally Closed version available (“-B” suffix option)
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
must be diode suppressed)
Notes: A
B
C
D
J
DIN Rail Mount
DIN Rail Model
Assemblies
Page 77
0.
[1
4
1.
67
[4
2
.4
]
0.
Series
MP
Operating Voltage
DC: 3-60 VDC
DC
D
Rated Load Current
3: 3 Amps
3
Control Voltage
D: 3-32 VDC
-B
Output Form
Blank: Normally Open
-B: Normally Closed
1[
25
.4]
40
0.
0
.7] 0.2
12
0[
0.5
2]
0.
[1
Accessories
]
.1
[5
48
Sockets
2]
Plug-In Mount
Page 60
0.2
5[
6.4
]
Specifications are subject to change without prior notice
DIN Rail Mount
Crydom DIN Rail Mounted Solid State Relays and Contactors are available in single,
dual and 3 phase output ratings in the range of 2 to 65 Amps per phase at 24 to
660 VAC or 2 to 30 Amps at 1 to 100 VDC in housing widths varying from 6 mm
for the lowest output rating versions to 45 mm for 3 phase output rating versions
and 62 mm for 3 phase reversing versions. Inputs cover the range of 24 to
280 VAC or 3 to 32 VDC and feature LED input status indicator. All
output ratings are free air in a 40° C ambient temperature.
Crydom DIN Rail mounted SSRs and Contactors are
“ready-to-use” and carry Safety Agency approvals as
noted on each catalog sheet. Visit the DIN Rail
SSR and Contactors section of the catalog or
Crydom website for additional information
on Crydom DIN Rail Mount SSRs and
Contactors.
AC Output
Page Series
50
51
52
53
54
55
Description
DRA-CN
DRA
SeriesOne DR
CKR
CMR
SeriesOne DR Dual
6 mm
DRA3P
DRA3R
CTR
3 Phase
2 2.4 3
4 4.2 5
6
8
Rating Amps
10 12 20 25 30 35 45 55 65
Solid State Relays
10/54 mm
11 mm
22.5 mm
45 mm
18 mm
Solid State Contactors
56
57
58
Reversing
3 Phase
DC Output
Page Series
Description
6 mm
62
DRA-CN
DRA
SeriesOne DR
CKM
63
DRA4D
Reversing
59
60
61
0.1 2.4
Rating Amps
3 3.5 4.2 5 6 8 10 12 20 30
Solid State Relays
10/54 mm
11/18 mm
22.5 mm
Solid State Contactors
DIN RAIL MOUNT • AC Output • Relays
DRA-CN Series
2 Amps
Panel Mount
PCB Mount
•  Thin 6.2 mm DIN Rail mount Solid State Relay
•  Ratings of 2 Amps @ 240 VAC
•  LED indicator for easy identification of control status
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive
loads) output
Notes: A
B
C
D
J
DIN Rail Mount
DIN Rail Mount
AC
ID Marker Strips
24
R
5[
80
]
.1
]
6]
2.
[9
4
Accessories
Assembly Input Voltage
05: 3-12 VDC
24: 15-30 VDC
3.
6
240A
3.1
[6
DRA-CN
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
24
Assemblies
50
Series
Operating Voltage
240A: 24-250 VAC, 2 Amps
0.
Plug-In Mount
Page 77
Specifications are subject to change without prior notice
DIN RAIL MOUNT • AC Output • Relays
•  Ready-to-use DIN Rail mountable Solid State Relays assemblies using standard Crydom SIP SSRs
•  Slim 10 mm (single channel) & 54 mm (four channels) packages
•  Ratings from 3 to 8 Amps
•  Operating Voltage of 12-530 VAC with back-to-back SCR output for added reliability in commercial
PCB Mount
and heavy industrial applications
D
H
J
PCB Mount Relays
62
Assemblies
.2]
[73
[5
3.
2.
12
3.
53
0.
87
[2
2
.1
]
[8
9.
6]
7]
.7]
6]
Standard Crydom SSR p/n
including the following series:
CX/CXE
MCX/MCXE
MP (One Channel only)
PF (One Channel only)
SPF/SPFE (One Channel only)
2.9
9.
SPF240D25
[8
1
5[
53
DRA
2.4
3.
Series
Page 35
Number of Channels
1: One N.O. Channel
4: Four N.O. Channels
Plug-In Mount
B
DIN Rail Mount
DIN Rail Mount
AC
•  Fits standard 35 mm DIN Rail profiles
•  Cage style screw termination for easy and reliable wire connection
•  AC & DC Control Voltage versions available depending upon selected SSR
•  Available with Normally Closed output
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (inductive loads) output
•  LED indicator for easy identification of control status
Notes: A
Panel Mount
3-8 Amps
DRA4 with MP Series SSR
(Four channels)
Accessories
DRA Series
DRA1 with SPF Series SSR
(One channel)
Complete specifications of these & other Crydom products available at: www.crydom.com
51
DIN RAIL MOUNT • AC Output • Relays
SeriesOne DR
6-12 Amps
Panel Mount
PCB Mount
•  DIN Rail mount 11 mm (6 Amps) or 18 mm (12 Amps) wide Solid State Relay
•  Operating Voltage of 24-280 VAC and 48-600 VAC
•  Fits standard 35 mm DIN Rail profiles
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
DIN Rail Mount
DIN Rail Mount
AC
•  Flexible Control Voltage of 4-32 VDC, 18-36 VAC, 90-140 VAC, 208-265 VAC
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (inductive loads) output
•  IP20 housing for greater safety with lug type terminals
•  LED indicator for easy identification of control status
•  UL 508 overload endurance rated
Notes: A
B
C
D
J
ID Marker Strips
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
(D suffix only)
3.
3
Accessories
Control Voltage
A: 208-265 VAC
B: 90-140 VAC
D: 4-32 VDC
E: 18-36 VAC
R
.3]
3.
7]
12
90
[8
A
5[
1]
24
3.5
[1
DR
Rated Load Current
06: 6 Amps
12: 12 Amps
43
Assemblies
Series
Operating Voltage
24: 24-280 VAC
48: 48-600 VAC
(D suffix only)
0.
Plug-In Mount
Page 77
52
Specifications are subject to change without prior notice
DIN RAIL MOUNT • AC Output • Relays
Panel Mount
10-30 Amps
PCB Mount
•  Solid State Relay with ratings from 10 to 30 Amps
•  Operating Voltage of 24-660 VAC
•  Fits standard 35 mm DIN Rail profiles
•  Slim 22.5 mm (width) package
C
D
J
Plug-In Mount
B
0.
88
[2
2.
2]
Notes: A
DIN Rail Mount
DIN Rail Mount
AC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Flexible Control Voltage of 4-32 VDC, 18-36 VAC, 90-280 VAC
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (inductive loads) output
•  LED indicator for easy identification of control status
•  Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection
•  Enhanced surge current ratings for the 30 Amps (facilitates the use of circuit breakers instead of fuse protection)
24
10
P
Rated Load Current
10: 10 Amps
20: 20 Amps
30: 30 Amps
-10
Switching Type
Blank: Zero Voltage Turn-On
-10: Random Turn-On
3.9
5[
3.
16
Operating
Voltage
24: 24-280 VAC
48: 48-530 VAC
60: 48-660 VAC
E
Assemblies
D
1]
CKR
Overvoltage Protection
Blank: Not Included
P: Included
[8
0.
Series
Control Voltage
D: 4-32 VDC
A: 90-280 VAC
AxxxxE: 18-36 VAC
Complete specifications of these & other Crydom products available at: www.crydom.com
10
0.3
]
Accessories
CKR Series
53
DIN RAIL MOUNT • AC Output • Relays
CMR Series
35-65 Amps
Panel Mount
PCB Mount
•  Solid State Relay with ratings from 35 to 65 Amps
•  Operating Voltage of 24-660 VAC
•  Fits standard 35 mm DIN Rail profiles
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Flexible Control Voltage of 4-32 VDC, 18-36 VAC, 90-140 VAC
•  Available with Zero Voltege Turn-On (resistive loads) or Random Turn-On (inductive loads) output
•  LED indicator for easy identification of control status
•  Elective Internal TVS (“P” suffix) eliminates the need for external Overvoltage Protection
DIN Rail Mount
DIN Rail Mount
AC
Notes: A
C
D
J
1.
75
[4
4.
5]
Plug-In Mount
24
35
Accessories
Operating
Voltage
24: 24-280 VAC
48: 48-530 VAC
60: 48-660 VAC
E
Rated Load Current
35: 35 Amps
45: 45 Amps
55: 55 Amps
65: 65 Amps
P
-10
Switching Type
Blank: Zero Voltage Turn-On
-10: Random Turn-On
4.2
9[
10
9]
2]
A
[7
5.
CMR
Overvoltage Protection
Blank: Not Included
P: Included
6
Series
Control Voltage
D: 4-32 VDC
A: 90-140 VAC
AxxxxE: 18-36 VAC
2.
9
Assemblies
54
B
Specifications are subject to change without prior notice
DIN RAIL MOUNT • AC Output • Dual Relays
SeriesOne DR Dual
Panel Mount
6 Amps
PCB Mount
•  DIN Rail mount 18 mm wide Solid State Dual Relay
•  Two independent channels (6 Amps)
•  Operating Voltage of 24-280 VAC and 48-600 VAC
•  Fits standard 35 mm DIN Rail profiles
Notes: A
B
C
D
DIN Rail Mount
DIN Rail Mount
AC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Flexible Control Voltage of 4-32 VDC
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (inductive loads) output
•  IP20 housing for greater safety with lug type terminals
•  LED indicator for easy identification of control status
•  UL 508 overload endurance rated
J
06
Control Voltage
D: 4-32 VDC
R
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
.3]
3.
32
[8
4.
4]
Number of Channels
D: Two N.O. Channels
D
90
Assemblies
24
5[
8]
D
3.5
[1
DR
Rated Load Current
06: 6 Amps
71
Series
0.
Operating Voltage
24: 24-280 VAC
48: 48-600 VAC
Accessories
Page 77
Plug-In Mount
ID Marker Strips
Complete specifications of these & other Crydom products available at: www.crydom.com
55
DIN RAIL MOUNT • AC Output • Contactors
DRA3P Series
2.4-4.2 Amps
Panel Mount
PCB Mount
•  2.4 & 4.2 Amp rated 3 phase Solid State Contactor
•  Operating Voltage of 48-510 VAC, 3-Phase
•  Fits standard 35 mm DIN Rail profiles
•  No heat sink required & cage style screw terminals for easy installation & reliable wire
connection
48
4
Accessories
Control Voltage
D: 4-6 VDC
E: 18-28 VDC
A: 200-265 VAC
B: 90-140 VAC
C: 36-60 VAC
R
2.9
1[
73
.9]
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
1.
7
Function
3P: 3 Phase
D
Rated Load Current
2: 2.4 Amps/1HP @ 480 VAC
4: 4.2 Amps/2HP @ 480 VAC
.9
]
3P
J
[4
4
Assemblies
DRA
D
7
Series
C
6]
Plug-In Mount
Operating Voltage
48: 48-510 VAC
B
[8
9.
Notes: A
3.
53
DIN Rail Mount
DIN Rail Mount
AC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Wide range of Control Voltage of 5 VDC, 24 VDC, 48 VAC, 115 VAC, 230 VAC
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (inductive loads) output
•  LED indicator for easy identification of control status
•  Overvoltage Protection included
•  HP & kW (IEC) rated
•  UL 508 overload endurance rated
56
Specifications are subject to change without prior notice
DIN RAIL MOUNT • AC Output • Contactors
Panel Mount
2.4-4.2 Amps
PCB Mount
•  2.4 & 4.2 Amps rated Motor Reversing Solid State Contactor
•  Operating Voltage 48-510 VAC, 3 phase
•  Protective Forward/Reverse interlock built-in function
•  Fits standard 35 mm DIN Rail profiles
Complete specifications of these & other Crydom products available at: www.crydom.com
Plug-In Mount
Assemblies
]
Control Voltage
D: 4-6 VDC
E: 18-28 VDC
A: 200-265 VAC
B: 90-140 VAC
C: 36-60 VAC
.9]
1.
7
4
73
[6
Function
3R: Motor Reverser
D
1[
43
48
2.9
2.
3R
Rated Load Current
2: 2.4 Amps/1HP @ 480 VAC
4: 4.2 Amps/2HP @ 480 VAC
9.
6]
DRA
J
[8
Series
D
53
Operating Voltage
48: 48-510 VAC
B
3.
Notes: A
DIN Rail Mount
DIN Rail Mount
AC
•  No heat sink required & cage style screw terminals for easy installation & reliable wire connection
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Wide range of Control Voltage of 5 VDC, 24 VDC, 48 VAC, 115 VAC, 230 VAC
•  Input status LED, Forward (green), Reverse (yellow)
•  Overvoltage Protection included
•  HP & kW (IEC) rated
•  UL 508 overload endurance rated
Accessories
DRA3R Series
57
DIN RAIL MOUNT • AC Output • Contactors
CTR Series
25 Amps
Panel Mount
PCB Mount
•  3 Phase Solid State Contactor with ratings 25 Amps per phase @ 600 VAC
•  Fits standard 35 mm DIN Rail profiles
•  90 mm width package
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial
applications
DIN Rail Mount
DIN Rail Mount
AC
•  Flexible Control Voltage of 4-32 VDC, 90-140 VAC, 180-280 VAC
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (inductive loads) output
•  LED indicator for easy identification of control status
•  Internal TVS eliminates the need for external Overvoltage Protection
•  UL 508 overload endurance rated
Notes: A
C
D
J
Plug-In Mount
D
60
4.
8
25
Accessories
Operating Voltage
60: 48-600 VAC
-10
3.8
4[
97
.5]
Switching Type
Blank: Zero Voltage Turn-On
-10: Random Turn-On
(DC Control only)
3.
54
CTR
Rated Load Current
25: 25 Amps/phase
[9
0]
Assemblies
Series
Control Voltage
B: 90-140 VAC
C: 180-280 VAC
D: 4-32 VDC
7
[1
23
.8
]
B
58
Specifications are subject to change without prior notice
DIN RAIL MOUNT • DC Output • Relays
0.1-3.5 Amps
Panel Mount
DRA-CN Series
PCB Mount
•  Thin 6.2 mm DIN Rail mount Solid State Relay
•  Available with ratings of 3.5 Amps @ 24 VDC or 100 mAmps @ 48 VDC
•  LED indicator for easy identification of control status
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/
solenoid coils must be diode suppressed)
B
D
J
DIN Rail Mount
DIN Rail Mount
DC
Notes: A
ID Marker Strips
3.
6
4
[9
2.
6]
Assembly Input Voltage
05: 3-12 VDC
24: 15-30 VDC
Complete specifications of these & other Crydom products available at: www.crydom.com
]
Assemblies
80
Accessories
.1
]
24
[6
024D
5[
24
DRA-CN
3.1
0.
Series
Operating Voltage
024D: 0-24 VDC, 3.5 Amps
048D: 0-48 VDC, 0.1 Amps
Plug-In Mount
Page 77
59
DIN RAIL MOUNT • DC Output • Relays
DRA Series
3-10 Amps
Panel Mount
•  Ready-to-use DIN Rail mountable Solid State Relay assemblies using standard Crydom SIP SSRs
•  Slim 10 mm (single channel) & 54 mm (four channels) packages
•  Ratings from 3 to 10 Amps
•  Operating Voltage of 1-200 VDC with high efficiency FETs
PCB Mount
•  Fits standard 35 mm DIN Rail profiles
•  Cage style screw termination for easy and reliable wire connection
•  Available with Normally Closed output
•  LED indicator for easy identification of control status
DIN Rail Mount
DIN Rail Mount
DC
Notes: A
B
D
H
J
Plug-In Mount
PCB Mount Relays
Page 35
0.
39
[1
0]
5[
[5
3.
2.
12
[8
9.
3.
53
]
Accessories
Standard Crydom SSR p/n
including the following series:
CMX/CMXE
MP (One Channel only)
.2]
6]
CMX100D10
9.
6
4
62
[8
DRA
3.
53
Assemblies
Series
Number of Channels
1: One N.O. Channel
4: Four N.O. Channels
7]
2.4
2.3
0[
58
.5]
DRA4 with MP Series SSR
(Four channels)
DRA1 with CMX Series SSR
(One channel)
60
Specifications are subject to change without prior notice
DIN RAIL MOUNT • DC Output • Relays
SeriesOne DR
Panel Mount
6-12 Amps
PCB Mount
•  DIN Rail mount 11 mm (6 Amps) or 18 mm (12 Amps) wide Solid State Relay
•  6 & 12 Amp Rated Load Current
•  Operating Voltage of 1-60 VDC and 1-100 VDC
•  Fits standard 35 mm DIN Rail profiles
•  MOSFET output provides added reliability in commercial and heavy industrial applications
•  Flexible Control Voltage 4-32 VDC
•  IP20 housing for greater safety with lug type terminals
•  LED indicator for easy identification of control status
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
DIN Rail Mount
DIN Rail Mount
DC
must be diode suppressed)
•  UL & cUL approved including General Purpose & Motor Controller ratings
•  UL 508 overload endurance rated
J
ID Marker Strips
Page 77
Rated Load Current
06: 6 Amps
12: 12 Amps
3.5
5[
DR
06
D
12
0.
71
[1
8]
Series
Operating Voltage
06: 1-60 VDC
10: 1-100 VDC
.3]
3.
3
[8
3.
7]
Control Voltage
D: 4-32 VDC
90
Plug-In Mount
D
Assemblies
B
Accessories
Notes: A
Complete specifications of these & other Crydom products available at: www.crydom.com
61
DIN RAIL MOUNT • DC Output • Relays
CKM Series
10-30 Amps
Panel Mount
PCB Mount
•  Solid State Relay with ratings from 10 to 30 Amps @ 60 VDC
•  Fits standard 35 mm DIN Rail profiles
•  Slim 22.5 mm (width) package
•  Low leakage MOSFET output provides added reliability in commercial and heavy industrial
applications
•  Flexible Control Voltage 4-32 VDC
•  LED indicator for easy identification of control status
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors and EMR/solenoid coils
DIN Rail Mount
DIN Rail Mount
DC
must be diode suppressed)
Notes: A
D
J
Plug-In Mount
0.
88
[2
2.
2]
B
10
3.9
5[
10
0.3
]
0.
1]
Accessories
Rated Load Current
10: 10 Amps
20: 20 Amps
30: 30 Amps
[8
06
3.
CKM
Operating Voltage
06: 0-60 VDC
16
Assemblies
Series
62
Specifications are subject to change without prior notice
DIN RAIL MOUNT • DC Output • Contactors
6-12 Amps
Panel Mount
DRA4D Series
PCB Mount
•  DC Motor/Polarity Reversing Solid State Contactor
•  6 & 12 Amps ratings
•  Operating Voltage of 1-100 VDC & 1-250 VDC
•  Protective Forward/Reverse interlock built-in function
B
D
J
Plug-In Mount
Notes: A
DIN Rail Mount
DIN Rail Mount
DC
•  Fits standard 35 mm DIN Rail profiles
•  No heat sink required & cage style screw terminals for easy installation & reliable wire connection
•  Convenient FET switches in H-Bridge configuration
•  DC Control Voltage options
•  Input Status LED, Forward (green), Reverse (yellow)
•  HP & kW (IEC) rated
Control Voltage
D: 5-15 VDC
E: 18-32 VDC
Assemblies
[5
4.
13
2.
Complete specifications of these & other Crydom products available at: www.crydom.com
Accessories
6
1]
Function
4D: Motor Reverser
D
.9]
6]
100
73
9.
4D
1[
[8
DRA
2.9
3
Series
Rated Load Current
6: 6 Amps/1/3HP @ 240 VDC
12: 12 Amps/1/3HP @ 90 VDC
3.
5
Operating Voltage
100: 1-100 VDC
250: 1-250 VDC
63
Plug-In Mount
Crydom Plug-In Relays are designed to install in industry standard relay sockets. They can also be soldered directly on PCB
assemblies if so desired. Available for applications requiring from 2 to 5 Amps at 24 to 280 VAC or 0.1 to 5 Amps at 1 to
100 VDC with inputs covering the range of 24 to 140 VAC or 2 to 32 VDC, these Single Pole Single Throw Normally Open
(SPST) relays offer the speed and dependability of Solid State switching in a traditional mechanical relay format.
Visit the Accessories and Assemblies sections of the catalog for information on compatible sockets and “ready-to-use”
Assemblies. Visit the Plug-In SSR section of the catalog or Crydom web site for additional information on Crydom Plug-In
Mount SSRs.
AC Output
Page Series
65
66
CN
ED
Description
280 V / 2 A
280 V / 5 A
DC Output
Page Series
67
68
CN
ED
Rating Amps
2 3 5
Solid State Relays
Description
1 - 60 V
1 - 100 V
Rating Amps
0.1 3.5 5
Solid State Relays
PLUG-IN MOUNT • AC Output • Relays
Panel Mount
2 Amps
PCB Mount
•  Thin Solid State Relay ideally suited for high density PCB applications
•  Ratings up to 2 Amps @ 24-280 VAC
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive
loads) output
B
C
D
G
J
DIN Rail Model ID Marker Strips
0.0
2[
15
]
Page 78
0.
0.5
Sockets
Page 77
Page 50
65
0.
20
0.
Assemblies
4]
6.
[1
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
0.
2
[5
]
]
.8
[3
Series
Operating Voltage
240A: 24-280 VAC, 2 Amps
24
R
]
240A
[5
CN
0.0
4[
Control Voltage
05: 3-12 VDC
24: 15-30 VDC
60: 38-72 VDC
1]
0.1
4[
3.6
]
]
7.
9
[2
1.
1
Complete specifications of these & other Crydom products available at: www.crydom.com
Plug-In Mount
Plug-In Mount
AC
Notes: A
DIN Rail Mount
•  R-C Snubber network for additional dv/dt attenuation
•  Pluggable into industry standard relay sockets or solderable
•  DIN Rail mountable using DRSCN series sockets
•  UL 508 overload endurance rated
•  UL pilot duty rated
0.5
9[
Accessories
CN Series
15
]
65
PLUG-IN MOUNT • AC Output • Relays
ED Series
3-5 Amps
Panel Mount
PCB Mount
•  AC Output Solid State Relay in an industry standard EMR plug-in package
•  Ratings of 3 & 5 Amps
•  Operating Voltage of 24-280 VAC
•  No moving parts eliminates arcing & contact bounce, significantly increasing the life expectancy
over equivalent
DIN Rail Mount
•  Back-to-back SCR output provides added reliability in commercial and heavy industrial applications
•  Available with Zero Voltage Turn-On (resistive loads) or Random Turn-On (phase control or inductive loads) output
•  LED indicator for easy identification of control status
•  Wide range of AC or DC Control Voltage options
•  Quick Connect termination for easy installation in sockets or on boards
•  DIN Rail & PCB mountable sockets available
•  Silent operation (no acoustical switching noise)
•  UL & IEC General Use & Motor Controller Ratings available
Notes: A
C
D
J
DIN Rail Sockets PCB Sockets
Page 78
Page 78
3
Accessories
Control Voltage
B: 100-140 VAC
C: 18-32 VDC
D: 3-15 VDC
E: 18-36 VAC
F: 35-72 VDC
* Drawing shown on the right
R
Switching Type
Blank: Zero Voltage Turn-On
R: Random Turn-On
]
C
[2
.5
24
Rated Load Current
3: 3 Amps (not available with B & E suffixes)
5: 5 Amps *
0.
1
Assemblies
ED
Operating Voltage
24: 24-280 VAC
1.
14
[2
9.
1]
0.
5
[1
2.
6]
Plug-In Mount
Plug-In Mount
AC
Series
66
B
1.4
7[
0.2
37
.4]
[5]
Specifications are subject to change without prior notice
PLUG-IN MOUNT • DC Output • Relays
0.1-3.5 Amps
Panel Mount
CN Series
PCB Mount
•  Thin Solid State Relay ideally suited for high density PCB applications
•  Ratings of 0.1 Amps @ 48 VDC or 3.5 Amps @ 48 VDC
•  Pluggable into industry standard relay sockets or solderable
•  DIN Rail mountable using DRSCN series sockets
•  UL 508 overload endurance rated
B
D
G
J
DIN Rail Mount
Notes: A
Page 58
2[
5
]
1
0.
0.5
Page 78
0.
2
[5
]
]
.8
[3
5
6
0.
0
2
0.
Assemblies
4]
6.
[1
Series
Operating Voltage
024D: 0-24 VDC, 3.5 Amps
048D: 0-48 VDC, 0.1 Amps
024D
]
[5
CN
24
0.0
4[
Control Voltage
05: 3-12 VDC
24: 15-30 VDC
60: 38-72 VDC
1]
0.1
4[
3.6
1.
1
[2
7.
9]
]
Complete specifications of these & other Crydom products available at: www.crydom.com
0.5
9[
Accessories
0.0
Sockets
Page 77
Plug-In Mount
Plug-In Mount
DC
DIN Rail Model ID Marker Strips
15
]
67
PLUG-IN MOUNT • DC Output • Relays
ED Series
5 Amps
Panel Mount
PCB Mount
•  DC output Solid State Relay in an Industry standard EMR plug-in package
•  5 Amps rated
•  Operating Voltage of 1-48 VDC and 1-80 VDC
•  No moving parts eliminates arcing & contact bounce, significantly increasing the life expectancy
over equivalent rated electromechanical relays and contactors
DIN Rail Mount
•  LED indicator for easy identification of control status
•  Wide range of AC or DC Control Voltage options
•  Quick Connect termination for easy installation in sockets or on boards
•  DIN Rail & PCB mountable sockets available
•  Silent operation (no acoustical switching noise)
•  Ideally suited for both resistive and inductive loads (inductive loads such as motors
and EMR/solenoid coils must be diode suppressed)
•  UL & IEC General Use & Motor Controller Ratings available
Notes: A
D
J
DIN Rail Sockets PCB Sockets
Page 78
Page 78
5
Accessories
Control Voltage
B: 90-140 VAC *
C: 18-32 VDC
D: 5-15 VDC
E: 18-36 VAC *
F: 35-72 VDC
* Drawing shown on the right
]
C
[2
.5
06
Rated Load Current
5: 5 Amps
0.
1
Assemblies
ED
Operating Voltage
06: 1-48 VDC
10: 1-80 VDC
1.
14
[2
9.
1]
0.
5
[1
2.
6]
Plug-In Mount
Plug-In Mount
DC
Series
68
B
1.4
7[
0.2
37
.4]
[5]
Specifications are subject to change without prior notice
Assemblies
Crydom offers a variety of “ready-to-use” assemblies featuring proven Crydom Solid
State Relays and Contactors installed in DIN Rail Sockets or on Panel or DIN Rail mounted
Heat Sinks. Assemblies are available for applications ranging from 1 to more than 80
Amps in both AC or DC output versions. Any standard Crydom Panel Mount or SIP type
PCB Mount SSR or Contactor can be offered as a “ready-to-use” Assembly. Contact the
nearest Crydom Distributor, Representative or local Crydom Sales Office if you don’t
locate your exact needed Assembly in the catalog or in the Crydom website.
ASSEMBLIES
Heat Sink / SSR Assemblies
Panel Mount
•  Standard single, dual and 3 phase SSRs mounted on high efficiency HS Series heat sinks
•  Ready-to-use assemblies with optimum SSR / thermal pad / heat sink combination simplifying selection,
ordering and installation
PCB Mount
•  Thermal efficiency ratings from 5.0ºC/W to 0.5ºC/W @ 40ºC ambient
•  Full SSR assembly ratings up to 82.5 Amps (single phase) or 27.5 Amps per phase (three phase) in a 40ºC ambient
•  DIN Rail and Panel mountable versions available for both stand-alone heat sinks and SSR assemblies
(most models)
DIN Rail Mount
•  Customized solutions available using single, dual and 3 phase SSRs
•  Wide variety of accessories available
Plug-In Mount
Assemblies
Assemblies
Accessories
70
Notes: A
B
C
D
E
F
Panel Mount Relays
Page 6
Total Number of Accepted Standard SSRs
1: 1 SSR (50, 35, 30, 27, 25, 27, 30 & 35 suffix only)
2: 1 or 2 SSRs (20, 17, 12 & 07 suffix only)
3: 1-3 SSRs or 1 3phase (10 & 05 suffix only)
Series
HS
20
2
DR
Thermal Resistance
50: 5.0 °C/W (DR suffix only)
30: 3.0 °C/W
25: 2.5 °C/W
20: 2.0 °C/W
17: 1.7 °C/W
15: 1.5 °C/W
12: 1.2 °C/W
10: 1.0 °C/W
07: 0.7 °C/W
05: 0.5 °C/W
DIN Rail Bracket
Blank: Not included
DR: Included
(50, 35, 30, 27, 20, 15,
12 & 10 suffix only)
2
Hardware Kit 1
(HK1)
Standard Crydom
SSR p/n
D2450
Thermal Pad
(i.e. HSP-1)
Heat Sinks &
other Accessories
Page 73
SSR
Number of Mounted SSRs
Blank: 1
2: 2
3: 3
Heat Sink
(i.e. HS201)
Ground Screw
(10-32 x 3/8 in)
DIN Rail Kit 1
(DRK1)
Specifications are subject to change without prior notice
Accessories
Crydom supports its extensive SSR and Contactor product lines with a
comprehensive offer of accessories including Heat Sinks, Thermal Pads,
Protective Covers, Sockets, Terminal Lugs, Hardware Kits, Marker Strips and
DIN Rail Kits to make it easy to employ Crydom SSRs and Contactors in any
application. Crydom can also create special configuration SSRs or Contactors
that include installed accessories if so desired. Visit the catalog or Crydom website
for additional information on Crydom SSR accessories.
Heat Sink/Accessories Compatibility
Page
Part number
73
HS501DR
74
HS301
74
HS251
74
HS201
75
HS172
75
HS151
75
HS103
76
HS072
76
HS053
HK1
HK2
HSP-1
HSP-2
HSP-3
HSP-5 HSP-6 KS100 KS300
DRK1
ACCESSORIES
Covers
Covers
Hockey Puck
DIN Rail Bracket
Large Puck
Panel Mount
PCB Mount
DIN Rail Mount
Part no.: KS100
Clear plastic cover for standard hockey puck
package SSRs (2.25 x 1.75 in). Safety covers provide
added protection from electric shock when installing
or checking equipment.
Part no.: KS300
Clear plastic cover large puck panel mount SSRs
(4 x 2.9 in). Safety covers provide added protection
from electric shock when installing or checking
equipment.
Notes: A
Plug-In Mount
Part no.: KS100-SMR
Clear plastic cover with cut out window for SMR6 and MC Series. Safety covers provide added
protection from electric shock when installing or
checking equipment.
Notes: A
B
J
[4
5]
J
J
]
[5]
[9
7
[1
11
.8
]
0.2
3.
8
2
4.
4
2.
88
[7
3.
2]
1.
77
B
5.4
8.
8
]
1
[6
1 [2
29
.2]
[3
7
5[
6
1.1
.1
]
]
1.
4
KS100-SMR
5.4
2.
7
Accessories
Accessories
1 [2
2.
71
1.
7
7
[6
8
.8
]
[4
5]
Assemblies
Notes: A
B
DIN Rail Kit 1
Part no.: DRK1
Spring, retaining clip, 45 mm DIN Rail bracket and 2
screws 6-32 x 1/4 in.
]
KS100
72
Specifications are subject to change without prior notice
ACCESSORIES
Filters
Hardware Kits
Heat Sinks
HS501DR
Panel Mount
AC Filters
Part no.: HK2
Bag with 1 ground screw 10-32 x 3/8 in and 2 bracket
screws 6-32 x 1/4 in.
Notes: A
B
zinc surface finish
Notes: A
.5
[4
4
1.
75
0.
82
[2
0.
7]
2x
J
0.
6
3]
[1
2.
9
2.
0.
51
[1
0.2
[5]
32
.1]
0.
42
[8
.1
1x
9]
0.
4
14 AWG wire
leads approx. 12" long
(4 Places)
0.1
[4. 6
1]
]
6[
[8
0
6]
[1
6.
[6
52
2.
5
3.
9]
1
1.
1.6
0.4
HK1
Complete specifications of these & other Crydom products available at: www.crydom.com
0[
HK2
10
]
5.3
0 [1
0.6
3.
15
[2
7
2x
]
0.3
[8. 3
4]
.9
]
B
J
]
Part no.: 3F20-4 (shown below)
EMI noise suppression filters with neutral for SSR in
three phase systems
Notes: A
B
J
.1]
HS501DR includes
DIN Rail Mounting Bracket
M4 Mounting Screws
Latch Release
Assemblies
Part no.: 3F20 (shown above)
EMI noise suppression filters for SSR in three phase
systems
•  5.0°C/W Thermal resistance
•  Suitable for 1 single or dual SSR
•  DIN Rail mountable
•  Heat sink material is steel with yellow
Part no.: HK1
Bag with 2 SSR mounting screws 8-32 x 3/8 in.
Accessories
Accessories
Part no.: 1F25
EMI noise suppression filter for SSR in AC single
phase systems
Plug-In Mount
HK2
DIN Rail Mount
PCB Mount
HK1
73
ACCESSORIES
Heat Sinks
Heat Sinks
HS301
Heat Sinks
HS251
HS201
Panel Mount
PCB Mount
version available as HS301DR
•  Heat sink material is aluminum with black anodized
finish
natural finish
•  2.0°C/W Thermal resistance
•  Suitable for 1 single or dual SSR
•  Panel mountable or DIN Rail mountable
version available as HS201DR
•  Heat sink material is aluminum with black
anodized finish
J
Notes: A
B
J
1.
Assemblies
.1]
78
]
8.4
1 [3
0]
5 [8
3.3
0
8 [4
1.
2.
31
98
[5
[5
8
0.
.7
]
3]
3.
1.
7
8
20
[4
[8
5.
1]
2]
[4
5.
2]
J
B
1.5
1.5
Accessories
Accessories
74
B
[8
1]
Plug-In Mount
Notes: A
•  2.5°C/W Thermal resistance
•  Suitable for 1 single or dual SSR
•  Panel mountable
•  Heat sink material is aluminum with
Notes: A
3.
20
DIN Rail Mount
•  3.0°C/W Thermal resistance
•  Suitable for 1 single or dual SSR
•  Panel mountable or DIN Rail mountable
3.1
6 [8
5.3
]
HS301DR includes
HS201DR includes
Ground Screw (10-32 x 3/8 in)
DIN Rail Kit 1 (DRK1)
Heat Sink (HS301)
One Hardware Kit 1 (HK1)
Ground Screw (10-32 x 3/8 in)
DIN Rail Kit 1 (DRK1)
Heat Sink (HS201)
One Hardware Kit 1 (HK1)
Specifications are subject to change without prior notice
ACCESSORIES
Heat Sinks
HS172
HS151
Heat Sinks
HS103
J
B
anodized finish
J
78
[7
6.
31
3
2.
5.
20
95
3.
1.5
3.3
J
1.
B
2]
[5
]
.3
00
[1
Notes: A
3.
20
8.
7
[8
]
1.
3]
[4
5.
2]
Notes: A
mountable version available as HS103DR
•  Heat sink material is aluminum with black
1 [3
6 [8
5.3
]
8.4
]
5]
4 [9
3.7
HS151DR includes
Ground Screw (10-32 x 3/8 in)
DIN Rail Kit 1 (DRK1)
Heat Sink (HS151)
One Hardware Kit 1 (HK1)
Complete specifications of these & other Crydom products available at: www.crydom.com
]
0.2
7 [6
2.3
Plug-In Mount
B
one 3 phase SSR
•  Panel mountable or DIN Rail
Assemblies
Notes: A
version available as HS151DR
•  Heat sink material is aluminum with black
anodized finish
•  1.0°C/W Thermal resistance
•  Suitable for 1, 2 or 3 single or dual SSRs;
HS103DR includes
Heat Sink (HS103)
Extruded DIN Rail Bracket
Fasteners
Three Hardware Kits 1 (HK1)
Accessories
Accessories
natural finish
•  1.5°C/W Thermal resistance
•  Suitable for 1 single or dual SSR
•  Panel mountable or DIN Rail mountable
[1
32
]
•  1.7°C/W Thermal resistance
•  Suitable for 1 or 2 single or dual SSRs
•  Panel mountable
•  Heat sink material is aluminum with
DIN Rail Mount
PCB Mount
Panel Mount
Heat Sinks
75
ACCESSORIES
Heat Sinks
Heat Sinks
HS072
ID Marker Strips
HS053
Panel Mount
CNLB
CNLN
PCB Mount
CNL2
natural finish
Notes: A
B
J
•  0.5°C/W Thermal resistance
•  Suitable for 1, 2 or 3 single or dual
SSRs; one 3 phase SSR
•  Panel mountable
•  Heat sink material is aluminum with black
anodized finish
B
J
[1
9
52
[1
J
[1
0.
.9]
0.
41
[88
Accessories
Accessories
5 [1
6
6 [1
20.
52.
2.
7
4.7
[7
5.
0]
50
[1
39
3.5
B
5]
9.
5]
.7
]
Part no.: CNL2
A package of 10 plastic strips comprising 10 markers
printed individually from 11 to 20.
Notes: A
[4
95
Assemblies
1.
Part no.: CNLN
A package of 10 plastic strips comprising 10 markers
printed individually from 1 to 10.
4.
.4
]
]
6.8
3 [6
2.6
24
.5
]
Plug-In Mount
Notes: A
Part no.: CNLB
A package of 10 plastic strips comprising 10
individual unprinted markers.
6
DIN Rail Mount
•  0.7°C/W Thermal resistance
•  Suitable for 1 or 2 single or dual SSRs
•  Panel mountable
•  Heat sink material is aluminum with
7]
4]
0.1
7[
76
4.3
]
Specifications are subject to change without prior notice
ACCESSORIES
Sockets
Sockets
DRS Socket
DRS Socket
Panel Mount
Lug Terminals
TRM1
Notes: A
B
J
J
J
7]
[5
3.
[1
0
2
39
2.
1
0.
4]
9]
[1
5.
3
0.
6
Complete specifications of these & other Crydom products available at: www.crydom.com
[8
6[
9.
6
]
2.0
52
.3]
3.
53
[8
53
0.
3.
1.
5]
[1
45
9.
6]
[2
5.
1
9.
2]
[4
94
1.
0.9
]
3.5
3 [1
0.5
]
3
1 [2
Assemblies
B
B
]
Notes: A
Notes: A
DRS Series DIN Rail Mountable Sockets
Part no.: DRS4
54 mm four channel DIN Rail mountable
socket to mount Crydom PCB mount
relays onto standard 35 mm DIN Rail profiles.
Plug-In Mount
Part no.: TRM6
Copper wire lug for AWG 14 (2.1 mm2) to AWG 6
(13.3 mm2) wire size. Mounts with #8, #10, M4 or M5
screws.
DRS Series DIN Rail Mountable
Sockets
Part no.: DRS1
10 mm single channel DIN Rail
mountable socket to mount Crydom PCB mount
relays onto standard 35 mm DIN Rail profiles.
2.0
6[
52
.3]
Accessories
Accessories
Part no.: TRM1
Copper wire lug for AWG 6 (13.3 mm2) to AWG 0
(53.5 mm2) wire size. Mounts with #8, #10, M4 or M5
screws. (Not compatible with IP20 covers)
DIN Rail Mount
PCB Mount
TRM6
77
ACCESSORIES
Panel Mount
Sockets
About
us
DRS-CN Sockets
Sockets
DRSED Socket
Sockets
PCBSED Socket
PCB Mount
DIN Rail Mount
3.1
[6
.1
]
5 [8
0.
24
0]
0]
6 [6
.5]
[40
5]
1.6
8
[3
2.
www.crydom.com
0.
55
[1
4]
1.
2
[7
1]
8
6]
2.
[9
64
3.
Accessories
Accessories
2.3
2.
Assemblies
0.
61
[1
5.
5
]
Plug-In Mount
Crydom, a brand of Custom Sensors & Technologies (CST) and Global Bolstered by four decades of Solid State Relay operations experience,
Expert in Solid State Switching Technology, has a distinguished Crydom specializes adapted and fully custom-designed SSR
record of providing high quality, world class Solid State Relay and products for nearly any application where unique specifications and
Control Products for a variety of heating, lighting and motion control optimized performance are critical for success.
applications. Crydom products, coupled with unparalleled technical
support, timely delivery and competitive pricing, provide Crydom’s Crydom’s modern purpose-built 100,000 square foot manufacturing
facility houses all aspects of its ISO certified operation including
clients with the innovative products and support necessary to succeed
Design and Development Engineering, Manufacturing Operations
in today’s competitive
and fast paced global markets.
CN Series DIN Rail Mountable Sockets
ED Series and
DIN Rail
Mountable
Socket Customer Service,
ED Series
PCB Mountable
Socket
Quality
Assurance,
Finance,
Marketing
and
Part no.: DRSCN05, DRSCN24
Part no.: DRSED
Part no.: PCBSED
General
Management,
permitting
close
coordination
of
all
aspects
of ED
Crydom’s extensive
selectionsocket
of standard
DIN Rail mountable
to mount CNoff-the-shelf products
Finger safe IP10 DIN Rail mountable
PC Board mountable socket for
onto standard
35 mm DIN
socket to mount
ED Series
relays onto
series relays.
Rated at
250 V AC/DC,
Crydom’s
activities.
Applications Engineering
and Sales
support
are 12
is constantly Series
beingrelays
updated
and expanded
through its continuous
Rail profiles. Maximum output rating for DRSCN
standard 35 mm DIN Rail profiles. Rated at 250 V
Suggested Pin-out hole diameter: 1.0 mm
both performed in the field toAmps.
provide
Crydom’s Customers with the
improvement
and
aggressive
new
product
development
programs.
sockets is 250 V, 6 Amps regardless of selected SSR.
AC/DC, 12 Amps. The DRSED includes M3 Combo
B J
Notes: A support.
Utilizing
state
of the
designs,
and technology,
DRS-CN
sockets
are art
6 mm
wide andmaterials
include input
screws. Crydom unparalleled technical and commercial
status
LED.
offers a wide range of AC and DC output SSRs in industry standard Panel
Notes: A B J
To learn more about Crydom Solid State Switching technology and
Mount,
PCB
A Mount
B G and
J DIN Rail packages, all meeting global safety
Notes:
products visit www.crydom.com or contact your authorized Crydom
and standards agency requirements such as CE, RoHS, UL, IEC, etc.
Distributor or Crydom Customer Service Representative today.
78
Specifications are subject to change without prior notice
ACCESSORIES
Thermal Pads Hockey Puck
Thermal Pads Large Puck
Part no.: HSP-6
Thermal pad for mini-puck panel mount SSRs.
Includes adhesive on one side.
Part no.: HSP-1
25 pack of non-adhesive thermal pads for standard
hockey puck package SSRs (2.25 x 1.75 in).
Part no.: HSP-3
Thermal pad for large puck panel mount SSRs (4 x 2.9 in).
Notes: A
Part no.: HSP-2 (shown above)
Thermal pad for standard hockey puck package SSRs
(2.25 x 1.75 in). Includes adhesive on one side.
Notes: A
B
2.9
5 [4
.7]
0.0
0
[0. 3
1
Th ]
k.
]
0.0
0
[0. 3
1
Th ]
k.
4.
1
1
2.
1.
33
[3
3.
8
]
]
[73
4.5
]
6.9
7.
2
1.7
[5
7 [1
25
0.6
J
Complete specifications of these & other Crydom products available at: www.crydom.com
Plug-In Mount
J
Assemblies
B
0.0
0
[0. 3
1
Th ]
k.
Accessories
Accessories
Notes: A
Part no.: HSP-5 (shown above)
Thermal pad for large puck panel mount SSRs (4 x 2.9 in).
Includes adhesive on one side.
]
J
[1
04
.4
B
DIN Rail Mount
PCB Mount
Panel Mount
Thermal Pads Mini-Puck
79
AMERICA
United States & Canada
Sales Support:
Tel.: +1 (877) 502 5500
Fax: +1 (619) 210 1590
[email protected]
Mexico
Tel. : +52 (222) 409 7000
Fax : +52 (222) 409 7810
[email protected]
Southern & Central
Tel.: +55 (11) 2505 7500
Fax: +55 (11) 2505 7507
Technical Support:
Tel.: +1 (877) 702 7700
[email protected]
EUROPE,
MIDDLE EAST
& AFRICA
Regional Sales & Technical Support
United Kingdom
France
Tel.: +33 (0) 810 123 963
Fax: +33 (0) 810 057 605
[email protected]
[email protected]
Spain
Tel.: +44 (0) 1202 606030
Fax: +44 (0) 1202 606035
[email protected]
[email protected]
Austria & Switzerland
Germany
Netherlands
Belgium
Italy
Middle East,
Africa & Other European
Countries
Tel.: +44 (0) 1202 606030
Fax: +44 (0) 1202 606035
[email protected]
[email protected]
Tel.: +32 (0) 2 460 4413
Fax: +32 (0) 2 461 2614
[email protected]
[email protected]
© 2011 Crydom Inc., All Rights Reserved.
Specifications are subject to change without prior notice.
Crydom and the Crydom logo are registered trademarks
of Crydom Inc.
CAT/CR/SF/EN
Distributed by :
ASIA PACIFIC
China & Hong Kong
Sales Support
Tel.: +86 (0) 21 6065 7725
Fax: +86 (0) 21 6065 7749
[email protected]
Technical Support
[email protected]
10/2011
Tel.: +49 (0) 180 3000 506
Fax: +49 (0) 180 3205 227
[email protected]
[email protected]
Tel.: +39 (0) 2 665 99 260
Fax: +39 (0) 2 665 99 268
[email protected]
[email protected]
Taiwan & Japan
Tel.: +34 902 876 217
Fax: +34 902 876 219
[email protected]
[email protected]
Tel.: +31 (0) 71 582 0068
Fax: +31 (0) 71 542 1648
[email protected]
[email protected]
Tel. : +44 (0) 1202 606030
Fax: +44 (0) 1202 606035
[email protected]
[email protected]
India
Tel: +886 2 8751 6388
Fax: +886 2 2657 8725
[email protected]
Tel: +91 (80) 4113 2204 /05
Fax: +91 (80) 4113 2206
[email protected]
South Korea
South East Asian &
Pacific Countries
Tel.: +82 2 2629 8312
Fax: +82 2 2629 8310
[email protected]
Tel.: +886 2 8751 6388 ext.131
Fax: +886 2 2657 8725
[email protected]