HSP Series Thermal Pads • Easy-to-use thermal interface Material designed for use with Standard Crydom single-phase and three-phase solid-state relays. • Excellent alternative to thermal grease • Adhesive on one side HSP-2 For use with all single phase Panel mount SSR’s, Control modules and M50 power modules. HSP-5 For use will all three phase panel mount SSR’s (53TP/53RV). HSP-6 For use with EL Series panel mount SSR’s. TYPICAL PROPERTIES Description Color Thickness, inch (mm) Adhesive One Side Thermal Impeadance [°C-in²/W] (1) Thermal Conductivity [W/m-K] Flame Rating Continuous Temperature Range [°C] Volume Resistivity [ohm-cm] HSP-2/HSP-5/HSP-6 Black 0.005 (0.127) Yes 0.48 @25 psi 2.0 V-O -60 to 180 102 Ohm NOTES (1) This value is provided for reference only. Actual application performance Is directly related to the surface roughness, flatness and pressure applied. Rev. 082214 MECHANICAL SPECIFICATIONS Tolerances: ±0.010in/0.3mm All dimensions are in: Inches [millimeters] HSP-5 HSP-2 3.62 [91.9] 2.20 [55.9] 1.70 [43.2]] 0.24 [6.1] 1.87 [47.5] 1.87 [47.5] 0.20 [5.1] 4.09 [103.9] HSP-6 1.33 [33.8] 1.18 [30.0] 1.01 [25.7] 0.67 [17.0] 0.50 [2.7] 0.24 [6.1] ANNEX - ENVIROMENTAL INFORMATION 2.90 [73.7]