IDC DIP & TRANSITION PLUGs .100" [2.54] CENTERLINE FTR & FDP SERIES Introduction: Adam Tech’s Flat Cable DIP & Transition plugs are a one piece connector system that quickly and easily mass terminates flat cable then mounts directly to the PCB or PCB socket. These connectors are ideal for interconnecting PCB’s in a permanent flat cable transition or satisfying disconnect applications. Our low profile design allows an increased board to board stacking density. Features: Available in 8 – 64 positions Eliminates need for two piece header & Socket set Fast easy mass termination without stripping cable Heavy duty Tin plated contacts Low Profile, high density board to board stacking Plugs into IC Socket or solders directly to PCB Specifications: Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black (Gray optional) Contacts: Brass Contact Plating: G = Gold over nickel underplate on contact area, Tin over copper underplate on IDC area. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 3 Amp max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Recommended cable size: 28 Awg stranded Temperature Rating: Operating temperature: -40°C to +105°C Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 ORDERING INFORMATION FTR 40 T PLATING T =Tin plated G =Gold plating on tails SERIES INDICATOR FTR = IDC Flat Cable Transition Plug .100" x .100" FDP-3 =IDC Flat Cable Dip Plug .100" x .300" FDP-6=IDC Flat Cable Dip Plug .100" x .600" POSITIONS FTR: 08, 10, 14, 16, 20, 24, 26, 28, 30, 34, 40, 50, 60, 64 FDP-3: .300" row spacing Positions: 08, 10, 14, 16, 18, 20, 24, 26, 28, 34, 40 FDP-6: .600" row spacing Positions: 24, 26, 28, 32, 34, 36, 40 OPTIONS: Add designator(s) to end of part number 30 = 30 µin gold plating in contact area GY=Gray color insulator RT =Board retention 358 www.adam-tech.com IDC DIP & TRANSITION PLUGs .100" [2.54] CENTERLINE FTR & FDP SERIES FTR Series .100" x .100" (8P-64P) A = .100 [2.54] x No. of Positions per row +.310 [7.88] B = .100 [2.54] x No. of Spaces per row .236 [6.00] FTR-14-T A .283 [7.20] .201 [5.10] B .100 [2.54] .291 [7.40] AFTER CRIMPING .130 [3.30] .100 [2.54] B .023 X .012 [0.60 X 0.30] .100 [2.54] .100 [2.54] ø .040 [1.02] Recommended PCB Layout FDP Series .100" x .300" (8P-20P) .418 [10.61] FDP-14-T A B .100 [2.54] .236 [6.00] AFTER CRIMPING .228 [5.80] .137 [3.50] .100 [2.54] B .300 [7.62] ø .040 [1.02] .300 [7.62] .022 X .012 [0.55 X 0.30] Recommended PCB Layout FDP Series .100" x .600" (24P-40P) .718 [18.24] FDP-24-T A B .236 [6.00] AFTER CRIMPING .228 [5.80] .137 [3.50] .100 [2.54] B .022 X .012 [0.55 X 0.30] .100 [2.54] .600 [15.24] ø .040 [1.02] .600 [15.24] www.adam-tech.com Recommended PCB Layout 359