.050" IDC CONNECTORS DUAL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: Adam Tech .050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature either .050" x .100" centerlines or .050" x .050" centerlines. These series quickly and easily mass terminate flat cable in one simple step. Our superior contact design provides a smooth, high pressure wiping action to ensure excellent continuity. They are used with a single layer of .025" flat cable. Their small size, light weight and high density make them ideal for compact and limited space applications. Features: .050" x .050" or .050" x .100" Low Profile and High Density Uses Single layer .025" Flat Cable Quickly and easily mass terminates standard Flat Cable Smooth High Pressure Wiping Contacts Mating Connectors: Adam Tech .050" HBHR series box headers, latch headers or HPH2 series pin headers ORDERING INFORMATION Specifications: Material: Insulator: PBT, glass reinforced, rated UL94V-0 Insulator Color: Black Contacts: Phosphor Bronze Contact Plating: Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max. Contact resistance: 20 mΩ max. Initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Insertion force: 0.312 lbs per contact max. Withdrawal force: 0.094 lbs per contact min. Recommended wire size: 28 Awg stranded Cable retention: 22 lbs. min axial force per inch. Mating durability: 500 cycles min. Temperature Rating: Operating temperature: -40°C to +105°C HFCS SERIES INDICATOR HFCS= Low profile .050" x .100" IDC Socket for single layer .025" Flat Cable HFCS-A= Low profile .050" x .050" IDC Socket for single layer .025" Flat Cable HFTR=.050" Transition plug HFDP= .050" Paddleboard Connector for single layer .025" Flat Cable FDH = 4 Row Transition plug Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 50 SG PLATING SG=Selective gold plating in contact area, nickel plating in termination area T =Tin plated (HFDP & FDH only) POSITIONS HFCS:10, 20, 30, 40, 50, 60, 70, 80, 90, 100 HFCS-A:10, 20, 26, 34, 40, 50 HFDP: 30, 50, 68, 72, 80, 100 HFTR:10, 12, 14, 16, 20, 22, 26, 30, 34, 40, 44, 50 FDH:10, 14, 16, 20, 26, 34, 40, 50, 60 OPTIONS Add designator(s) to end of part number N= No polarization bump (HFCS series) www.adam-tech.com 343 .050" IDC SOCKET DUAL ROW Flat Cable SOCKETs HFCS SERIES HFCS-A .050" x .050" HFCS-B A B .050 [1.27] .118 [3.00] HFCS-A-34-SG .050 [1.27] .157 [4.00] .122 [3.10] .197 [5.00] DIMENSIONS PART No. & POSITIONS B A HFCS-A-10 SG .450 [5.08] .413 [10.50] HFCS-A-20 SG .450 [11.43] .665 [16.90] HFCS-A-26 SG .600 [15.24] .815 [20.70] HFCS-A-34 SG .800 [20.32] 1.016 [25.80] HFCS-A-40 SG .950 [24.13] 1.165 [29.60] HFCS-A-50 SG 1.200 [30.48] 1.413 [35.90] HFCS .050"HFCS-A x .100" A B .050 [1.27] .236 [6.00] .100 [2.54] HFCS-40-SG PART No. & POSITIONS .307 [7.80] Dimensions A B 0.200 [11.10] HFCS-10 SG 0.437 [5.08] HFCS-20 SG 0.687 [11.43] 0.450 [17.45] HFCS-30 SG 0.937 [17.78] 0.700 [23.80] HFCS-40 SG 1.187 [24.13] 0.950 [30.15] USE DIMENSION CHART FRO OLD CAT. 1.200 [36.50] HFCS-50 SG 1.437 [30.48] STRAIN RELIEF OPTIONAL 344 www.adam-tech.com HFCS-60 SG 1.687 [36.83] 1.450 [42.85] HFCS-70 SG 1.937 [43.18] 1.700 [49.20] HFCS-80 SG 2.187 [49.53] 1.950 [55.55] HFCS-90 SG 2.437 [55.88] 2.200 [61.90] HFCS-100 SG 2.687 [62.23] 2.450 [68.25] IDC DIP & TRANSITION PLUGs .100" [2.54] CENTERLINE FTR & FDP SERIES Introduction: Adam Tech’s Flat Cable DIP & Transition plugs are a one piece connector system that quickly and easily mass terminates flat cable then mounts directly to the PCB or PCB socket. These connectors are ideal for interconnecting PCB’s in a permanent flat cable transition or satisfying disconnect applications. Our low profile design allows an increased board to board stacking density. Features: Available in 8 – 64 positions Eliminates need for two piece header & Socket set Fast easy mass termination without stripping cable Heavy duty Tin plated contacts Low Profile, high density board to board stacking Plugs into IC Socket or solders directly to PCB Specifications: Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black (Gray optional) Contacts: Brass Contact Plating: G = Gold over nickel underplate on contact area, Tin over copper underplate on IDC area. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 3 Amp max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Recommended cable size: 28 Awg stranded Temperature Rating: Operating temperature: -40°C to +105°C Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 ORDERING INFORMATION FTR 40 T PLATING T =Tin plated G =Gold plating on tails SERIES INDICATOR FTR = IDC Flat Cable Transition Plug .100" x .100" FDP-3 =IDC Flat Cable Dip Plug .100" x .300" FDP-6=IDC Flat Cable Dip Plug .100" x .600" POSITIONS FTR: 08, 10, 14, 16, 20, 24, 26, 28, 30, 34, 40, 50, 60, 64 FDP-3: .300" row spacing Positions: 08, 10, 14, 16, 18, 20, 24, 26, 28, 34, 40 FDP-6: .600" row spacing Positions: 24, 26, 28, 32, 34, 36, 40 OPTIONS: Add designator(s) to end of part number 30 = 30 µin gold plating in contact area GY=Gray color insulator RT =Board retention 358 www.adam-tech.com IDC DIP & TRANSITION PLUGs .100" [2.54] CENTERLINE FTR & FDP SERIES FTR Series .100" x .100" (8P-64P) A = .100 [2.54] x No. of Positions per row +.310 [7.88] B = .100 [2.54] x No. of Spaces per row .236 [6.00] FTR-14-T A .283 [7.20] .201 [5.10] B .100 [2.54] .291 [7.40] AFTER CRIMPING .130 [3.30] .100 [2.54] B .023 X .012 [0.60 X 0.30] .100 [2.54] .100 [2.54] ø .040 [1.02] Recommended PCB Layout FDP Series .100" x .300" (8P-20P) .418 [10.61] FDP-14-T A B .100 [2.54] .236 [6.00] AFTER CRIMPING .228 [5.80] .137 [3.50] .100 [2.54] B .300 [7.62] ø .040 [1.02] .300 [7.62] .022 X .012 [0.55 X 0.30] Recommended PCB Layout FDP Series .100" x .600" (24P-40P) .718 [18.24] FDP-24-T A B .236 [6.00] AFTER CRIMPING .228 [5.80] .137 [3.50] .100 [2.54] B .022 X .012 [0.55 X 0.30] .100 [2.54] .600 [15.24] ø .040 [1.02] .600 [15.24] www.adam-tech.com Recommended PCB Layout 359