BIAS TEES 2.9mm, up to 40 GHz, 25 Volts SPECIFICATIONS: Models: 8810KMFX-YY, 8810KFFX-YY, 8810KMMX-YY, 8810FMX-YY Electrical: Frequency Range Standard Freq. Values VSWR Insertion Loss 50 kHz - 18 GHz 18 - 40 GHz Impedance Isolation (RF to Bias Port) 250 kHz - 26.5 GHz 100 kHz - 40 GHz DC Voltage DC Current Model 8810KXXX-26 Model 8810KXXX-40 Rise Time (10-90%) 50 kHz - 40 GHz 26.5 & 40 GHz 1.80:1 Max. 50dB Typical 30dB Typ. 25 VDC Max. 0 -1.0 Insertion Loss (dB) 1.5dB Max. 3.0dB Max. 50 Ohms Typical performance from 50 kHz - 40 GHz -2.0 -3.0 -4.0 -5.0 750 mA Max. 150 mA Max. < 9 pS Typical .00001 .0001 .001 .1 FREQ (GHz) .01 1 10 100 40 3.50 Mechanical: 3.00 Mates with SMA, 3.5mm and K* Series Connectors as well as SMK IAW MIL-STD-348) Conductors Housing SMA Connectors Gold Plated Beryllium Copper Gold Plated Brass Passivated Stainless Steel VSWR Passivated Stainless Steel 2.9mm Connectors 2.50 2.00 2.00 1.50 1.50 Mates with MIL-STD-348 BNC Connectors Nickel Plated Brass 1.00 .00001 .0001 Mates with MIL-STD-348 * K is a Trademark of Anritsu Corp. DC Input Connector Options Solder Post, X=1 BNC Female, X=3 .001 .1 FREQ (GHz) .01 .515±.030 [13.08±0.76] 8810KFFX-YY Female 8810KMMX-YY Male 8810KFMX-YY Female Female 1.60 [40.64] Male 1.75 [44.45] Male 1.060 [26.92] Cent. Overall Length Max. 1.63 [41.40] 40 1.20 [30.48] AC + DC Port AC Port .63 [16.00] .19 [4.83] 1.63 [41.40] Overall Length HOW TO ORDER: Model Number: 8810KZZX-YY Base Number DC Connector Type 1 = Solder Post 2 = SMA Female Conn. 3 = BNC Female Conn. 1.00 100 DC Input (SMA Female Conn.) Option X = 2 3X Ø.102 [Ø2.59] THRU Connector Model Configuration Port Numbers AC + DC AC Male Female 8810KMFX-YY 10 .489 [12.42] Centered .244 [6.20] .25 [6.35] 1 Freq. Range 26 = 50 kHz - 26.5 GHz 40 = 50 kHz = 40 GHz Ordering Examples: Model Number: 8810KFF2-26 50 kHz - 26.5 GHz, 2.9mm Fem/Fem 25 Volts, 750mA Max. SMA Female DC Connector Type Model Number: 8810KMF1-40 50 kHz - 40 GHz, 2.9mm Male/Fem 25 Volts, 150mA Max. Solder Post DC Connector Type Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only. Design specifications are subject to change without notice. Contact factory for technical specifications before purchasing or use. 8810K: REV H Aeroflex / Inmet, Inc. • 300 Dino Drive, Ann Arbor, MI 48103 • U.S.A. 888-244-6638 or 734-426-5553 • FAX: 734-426-5557 www.aeroflex.com/inmet • [email protected]