DC BIAS PASSING ATTENUATOR 500 MHz - 2 GHz, 100 Volts SPECIFICATIONS: Models: 9093-N-XX, 9093-SMA-XX, 9093-TNC-XX Electrical: (@ 25°C Ambient) Frequency Range Standard dB Values* Attenuation Accuracy Impedance DC Resistance*** 500 MHz - 2 GHz 4, 6, 8, 10, 15, 20dB ±2.0 dB** 50 Ohms 0.25 Ohms Max. (CC IN TO CC OUT) VSWR Voltage Rating DC Current RF Power (Avg) Operating Temp. Range 1.35:1 Max. 100 Volts Max. 2 Amps. Max. 2 Watts Max. -55°C to +125°C **CENTER CONDUCTOR TO CASE DC ISOLATED > 5 MEGAOHMS Mechanical: Connectors Passivated Stainless Steel Mates with MIL-STD-348 Gold Plated Beryllium Copper Conductors SCHEMATIC DIAGRAM **dB Values < 15 dB are Typically Within + 1.0dB Model Number: 9093-N-XX Type N Connectors Length See Table dB Value Length Diameter 4, 6, 8, 10, 15 1.76 ±.05 [44.7 ±1.3] Ø.62 [15.8] 20dB 2.28 ±.05 [57.9 ±1.3] Ø.56 [14.2] Diameter See Table Model Number: 9093-SMA-XX SMA Connectors Length See Table Length dB Value Inches 4, 6, 8, 10, 15 20dB 1.21 ±.05 1.57 ±.05 Millimeters [30.7 ±1.3] [39.9 ±1.3] Length See Table Model Number: 9093-TNC-XX TNC Connectors dB Value 4, 6, 8, 10, 15 20dB Length Inches Millimeters [52.6 ±1.3] 2.07 ±.05 [62.2 ±1.3] 2.45 ±.05 HOW TO ORDER: Model Number: 9093-YYY-XX Ø.36 [9.1] Ø.56 [14.2] Ordering Examples: Model Number: 9093-N-10 10 dB; Type N; Male/Fem dB Value Connector Type N = Type N Model Number: 9093-TNC-20 SMA = SMA 20 dB; TNC; Male/Fem TNC = TNC Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only. *Other dB values available for special order. 9093: REVJ Aeroflex / Inmet, Inc. • 300 Dino Drive, Ann Arbor, MI 48103 • U.S.A. 888-244-6638 or 734-426-5553 • FAX: 734-426-5557 www.aeroflex.com/inmet • [email protected]