Through Hole Power Inductors THMR1395 Type Features High current ( lsat up to 66A ) though hole type. Magnetically shielded, suitable for hight density mounting. High energy storage and low DCR. Ideal for power source circuits, DC-DC converter, DC-AC inverters inductor application. In addition to the standard versions shown here, customized inductors are available to meet your exact requirements. Mechanical Dimension: RECOMMENDED PAD PATTERNS D A C 1.6/0.063 UNIT : mm/inch A = 12.50 / 0.492 Max. B = 14.50 / 0.571 Max. C = 3.20 0.5 / 0.126 0.020 D = 9.50 / 0.374 E = 1.30 0.1/0.051 0.004 B 9.0/0.354 E 7.5/0.295 Electrical Characteristics: At 25 C: 100KHz, 1.0V o PART NO. L1 (uH) DCR (m ) 8% Isat 2 (Adc) Irms 3 (Adc) THMR1395-R28 0.28 0.47 66 47 THMR1395-R35 0.35 0.47 58 47 THMR1395-R45 0.45 0.96 47 35 THMR1395-0R6 0.60 0.96 40 35 THMR1395-0R8 0.80 1.25 37 30 THMR1395-1R2 1.20 1.55 30 27 1.Tolerance of inductance : 0.28~1.20uH 15% 2.Isat is the DC current which cause the inductance drop less than 20% of its nominal inductance without current 3.Irms is the DC current which cause the surface temperature of the part increase less than 45oC 4.Operating temperature: -40oC to 125oC ( including self-temperature rise ) DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C. TEL: 886-3-3591968; FAX: 886-3-3591991 http://www.deltaww.com 153