rBOX103 Robust Din-rail Fanless Embedded System with Intel® Atom™ Processor Z510PT/ Z520PT up to 1.33 GHz, Intel® US15WPT and 2 Isolated CAN Bus Wireless (3G/GPRS) LED indicators (power, alarm, ready/ active, COM) Intel® Atom™ processor Z510 PT/ Z520PT 2 isolated CAN 2.0 A/B Features ● Fanless and cableless design ● Supports Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT 1.33 GHz ● Wide temperature operation of -40°C ~ +70°C ● 2 isolated CAN 2.0 A/B ● 2 isolated Ethernet ● 2 watchdog timer ● LED indicators ● 1 wireless (3G/GPRS) ● SNMP V1/V2c ● Supports one CompactFlash™, one SD card (optional) ● 2 power paths with terminal block and 12-48VDC ● Supports AXView monitoring software package Front view Isolation Low Power CAN Bus UL508 IP30 Fanless Din-rail kit Ext. Temp Introduction System I/O Outlet rBOX103 din-rail fanless embedded field controller supports extra low power Intel® Atom™ processors Z510PT and Z520PT with extended temperature range of -40°C to +70°C for use in extreme operating environments. VGA Power Input Alarm Contact To prevent ESD and over-voltage, this super compact rBOX103 is equipped with two isolated CAN 2.0 A/B, two isolated Ethernet for offering magnetic isolation protection. Two power paths input minimize the risk of data loss in the event of a single power failure. rBOX103 is powered by IP30 housing, wide operating temperature range and Safety/EMI/EMS compliance. Besides, it is also specially designed for remote control/ monitoring management applications like automatic parking lot, traffic cabinet and more. rBOX103 features rich expansion for communication such as CAN bus in-vehicle network. The ready-to-run rBOX103 equipped with AXView monitoring software is a total solution for facility monitoring systems, intelligent transportation systems, and more. Wireless Watchdog Timer LEDs Specifications Standard Color Construction CPU System Memory System I/O Outlet 343 Sliver-Black Extruded aluminum and heary-duty steel, IP30 Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT 1.33 GHz 1 x 200-pin DDR2 SO-DIMM max. up to 2 GB Serial Port 2 x RS-232/422/485 (COM 1/2) (isolated COM as option) Interface select by software or BIOS Supports Auto Flow Control in RS-485 mode ESD protection 15 KV Serial port speed up to 115.2kbps LAN 1 x 10/100/1000Mbps Ethernet 1 x 10/100Mbps Ethernet Magnetic isolation protection 1.5 KV USB 2 x USB 2.0 USB power distribution control by software CAN 2 CAN 2.0 A/B (DB9 connector) Meets ISO 11898 standard CAN Storage Installation Power Supply Power Supply Rear view Software control termination resistor 120 ohm Magnetic isolation protection 2.5KV Transmitter baud rate from 5kb/s to 1Mb/s 1 x DB15 connector 2 x DC power input with terminal block One relay output with current 0.5A @30VDC 1 x Mini Card (Full size, supports USB only) 1 x SIM socket onboard Supports 3G/GPRS 2 WDT WDT 1: one step is 1 sec, 255 levels WDT 2: one step is 250ms, 255 levels System Power, Alarm, Ready/Active, COM (TXD,RXD), CAN (Act,Termination Indicator) Alarm DC PWR1 or PWR2 is lost (default) User define event Supports 1 x CompactFlash Supports 1 x SD card up to 32 GB (optional) Din-rail, wall mount 2 power paths Power Input Range 12-48VDC Power Input Rating 12-48VDC, 1.4-0.4A Power Protection DC Version: OVP (over voltage protection) UVP (under voltage protection) Reverse protection Power 0.7A @ 24V, 17W Consumption (COM 0.47A @ 36V, 17.24W port link up) 0.36A @ 48V, 17.48W * All specifications and photos are subject to change without notice. Specifications Operating Temperature Storage Temperature Humidity Weight (net/gross) Dimensions EOS Support ISO Safety Compliance EMI Compliance EMS Compliance Environmental Test Ordering Information -40°C ~ +70°C (-40°F ~ +158°F) -45°C ~ +85°C (-49°F ~ +185°F) 5% ~ 95% 1.38 kg (3 lb)/1.72 kg (3.78 lb) 81 mm (3.18") (W) x 110 mm (4.33") (D) x 135 mm (5.31") (H) XPE, WinCE, Linux support package, Windows® 7 Embedded Manufactured in an ISO9001 facility UL508, UL60950-1 Heavy Industrial CE, including: EN60950-1, IEC60950-1 FCC Part 18 Heavy Industrial CE, including: EN61000-6-4, EN61000-3-2, EN61000-3-3 Heavy Industrial CE, including: EN61000-6-2 EN61000-4-2 (ESD standards) * Contact: +/- 6 KV; criteria B * Air: +/- 8 KV; criteria B EN61000-4-3 (radiated RFI standards) * 10V/m, 80 to 1000 MHz; 80% AM criteria A EN61000-4-4 (burst standards) * Signal ports: +/- 2 KV; criteria B * DC power ports: +/- 2 KV; criteria B EN61000-4-5 (surge standards) * Signal ports: +/- 1 KV; line-to-line; criteria B * DC power ports: +/- 0.5 KV; line-to-earth; criteria B EN61000-4-6 (induced RFI standards) * Signal ports: 10 Vrms @ 0.15 ~ 80 MHz; 80% AM criteria A * DC power ports: 10 Vrms @ 0.15 ~ 80 MHz; 80% AM criteria A EN61000-4-8 (magnetic field standards) * 30 A/m @ 50, 60 Hz; criteria A IEC60068-2-6 Fc (vibration resistance) 5 g @ 10 ~ 150 Hz, amplitude 0.35 mm (operation/storage/ transport) IEC60068-2-27 Ea (shock) 25 g @ 11 ms (half-sine shock pulse; operation); 50 g @ 11 ms (half-sine shock pulse; storage/transport) IEC60068-2-32 Ed (free fall) 1 M (3.281ft) Standard rBOX103-FL1.1G rBOX103-FL1.33G Optional DDR2 SODIMM DDR2 SODIMM Robust Din-rail fanless embedded system with Intel® AtomTM processor Z510PT 1.1 GHz and 2 isolated CAN 2.0 (-40°C ~ +70°C) Robust Din-rail fanless embedded system with Intel® AtomTM processor Z520PT 1.33 GHz and 2 isolated CAN 2.0 (-40°C ~ +70°C) 1 GB ~ 2 GB (with W.T. memory) 1 GB ~ 2 GB (with 0°C ~ +85°C memory; operating temperature: 0°C ~ +70°C) 2 GB or above (with W.T. CF) CompactFlash Wall mount kit Wireless (3G/GPRS) module for rBOX series *Specifications and certifications are based on options and may vary. Overview Embedded Systems Embedded Systems for Transportation 3 Embedded Field Controllers Industrial Firewall Embedded MicroBoxes Industrial Barebone Systems Industrial Chassis Dimensions Backplanes Power Supplies Peripherals & Accessories * All specifications and photos are subject to change without notice. a x i o m te k . c o m © 2015 Axiomtek Co., Ltd. All rights reserved. 344