rbox103

rBOX103
Robust Din-rail Fanless Embedded System
with Intel® Atom™ Processor Z510PT/
Z520PT up to 1.33 GHz, Intel® US15WPT
and 2 Isolated CAN Bus
Wireless
(3G/GPRS)
LED indicators
(power, alarm, ready/
active, COM)
Intel® Atom™
processor Z510 PT/
Z520PT
2 isolated CAN 2.0 A/B
Features
● Fanless and cableless design
● Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT
1.33 GHz
● Wide temperature operation of -40°C ~ +70°C
● 2 isolated CAN 2.0 A/B
● 2 isolated Ethernet ports
● 2 watchdog timer
● LED indicators
● 1 wireless (3G/GPRS)
● SNMP V1/V2c
● Supports one CompactFlash™, one SD card (optional)
● 2 power paths with terminal block and 12-48VDC
● Supports AXView remote monitoring software package
Front view
Isolation
Low Power
CAN Bus
UL508
IP30
Fanless
Din-rail kit
Ext. Temp
Introduction
System I/O Outlet
The rBOX103 din-rail fanless embedded field controller supports extra low power Intel®
Atom™ processors Z510PT and Z520PT with extended temperature range of -40°C to
+70°C for use in extreme operating environments.
VGA
Power Input
Alarm Contact
To prevent ESD and over-voltage, this super compact rBOX103 is equipped with two
isolated CAN 2.0 A/B, two isolated Ethernet for offering magnetic isolation protection.
Two power paths input minimize the risk of data loss in the event of a single power
failure. rBOX103 is powered by IP30 housing, wide operating temperature range and
Safety/EMI/EMS compliance. Besides, it is also specially designed for remote control/
monitoring management applications like automatic parking lot, traffic cabinet and more.
The rBOX103 features rich expansion for communication such as CAN bus in-vehicle
network.The ready-to-run rBOX103 equipped with AXView remote monitoring software
is a total solution for facility monitoring systems, intelligent transportation systems, and
more.
Wireless
Watchdog Timer
LEDs
Specifications
Standard Color
Construction
CPU
System Memory
System I/O Outlet
331
Sliver-Black
Extruded aluminum and heary-duty steel, IP30
Intel® Atom™ processor Z510PT 1.1 GHz or Z520PT 1.33 GHz
1 x 200-pin DDR2 SO-DIMM max. up to 2 GB
Serial Port
2 x RS-232/422/485 (COM 1/2)
(isolated COM as option)
Interface select by software or BIOS
Supports Auto Flow Control in RS-485
mode
ESD protection 15 KV
Serial port speed up to 115.2kbps
LAN
1 x 10/100/1000Mbps Ethernet
1 x 10/100Mbps Ethernet
Magnetic isolation protection 1.5 KV
USB
2 x USB 2.0
USB power distribution control by
software
CAN
2 CAN 2.0 A/B (DB9 connector)
Meets ISO 11898 standard
CAN
Storage
Installation
Power Supply
Power Supply
Rear view
Software control termination resistor
120 ohm
Magnetic isolation protection 2.5KV
Transmitter baud rate from 5kb/s to 1Mb/s
1 x DB15 connector
2 x DC power input with terminal block
One relay output with current 0.5A
@30VDC
1 x Mini Card (Full size, supports USB
only)
1 x SIM socket onboard
Supports 3G/GPRS
2 WDT
WDT 1: one step is 1 sec, 255 levels
WDT 2: one step is 250ms, 255 levels
System
Power, Alarm, Ready/Active, COM
(TXD,RXD), CAN (Act,Termination
Indicator)
Alarm
DC PWR1 or PWR2 is lost (default)
User define event
Supports 1 x CompactFlash
Supports 1 x SD card up to 32 GB (optional)
Din-rail, wall mount
2 power paths
Power Input Range 12-48VDC
Power Input Rating 12-48VDC, 1.4-0.4A
Power Protection DC Version:
OVP (over voltage protection)
UVP (under voltage protection)
Reverse protection
Power
0.7A @ 24V, 17W
Consumption (COM 0.47A @ 36V, 17.24W
port link up)
0.36A @ 48V, 17.48W
* All specifications and photos are subject to change without notice.
Specifications
Operating Temperature
Storage Temperature
Humidity
Weight (net/gross)
Dimensions
EOS Support
ISO
Safety
Compliance
EMI
Compliance
EMS
Compliance
Environmental Test
Ordering Information
-40°C ~ +70°C (-40°F ~ +158°F)
-45°C ~ +85°C (-49°F ~ +185°F)
10% ~ 95%
1.38 kg (3 lb)/1.72 kg (3.78 lb)
81 mm (3.18") (W) x 110 mm (4.33") (D) x 135 mm (5.31") (H)
XPE, WinCE, Linux support package, Windows® 7 Embedded
Manufactured in an ISO9001 facility
UL508, UL60950-1
Heavy Industrial CE, including:
EN60950-1, IEC60950-1
FCC Part 18
Heavy Industrial CE, including:
EN61000-6-4, EN61000-3-2, EN61000-3-3
Heavy Industrial CE, including:
EN61000-6-2
EN61000-4-2 (ESD standards)
* Contact: +/- 6 KV; criteria B
* Air: +/- 8 KV; criteria B
EN61000-4-3 (radiated RFI standards)
* 10V/m, 80 to 1000 MHz; 80% AM criteria A
EN61000-4-4 (burst standards)
* Signal ports: +/- 2 KV; criteria B
* DC power ports: +/- 2 KV; criteria B
EN61000-4-5 (surge standards)
* Signal ports: +/- 1 KV; line-to-line; criteria B
* DC power ports: +/- 0.5 KV; line-to-earth; criteria B
EN61000-4-6 (induced RFI standards)
* Signal ports: 10 Vrms @ 0.15 ~ 80 MHz; 80% AM
criteria A
* DC power ports: 10 Vrms @ 0.15 ~ 80 MHz; 80% AM
criteria A
EN61000-4-8 (magnetic field standards)
* 30 A/m @ 50, 60 Hz; criteria A
IEC60068-2-6 Fc (vibration resistance)
5 g @ 10 ~ 150 Hz, amplitude 0.35 mm (operation/storage/
transport)
IEC60068-2-27 Ea (shock) 25 g @ 11 ms (half-sine shock
pulse; operation); 50 g @ 11 ms (half-sine shock pulse;
storage/transport)
IEC60068-2-32 Ed (free fall) 1 M (3.281ft)
Standard
rBOX103-FL1.1G-DC
rBOX103-FL1.33G-DC
Optional
DDR2 SODIMM
DDR2 SODIMM
Robust din-rail fanless embedded system with Intel®
AtomTM processor Z510PT 1.1 GHz and 2 isolated CAN 2.0
(-40°C ~ +70°C)
Robust din-rail fanless embedded system with Intel®
AtomTM processor Z520PT 1.33 GHz and 2 isolated CAN 2.0
(-40°C ~ +70°C)
1 GB ~ 2 GB (with W.T. memory)
1 GB ~ 2 GB (with 0°C ~ +85°C memory; operating
temperature: 0°C ~ +70°C)
2 GB or above (with W.T. CF)
CompactFlash
Wall mount kit
Wireless (3G/GPRS) module for rBOX series
*Specifications and certifications are based on options and may vary.
Overview
Embedded
Systems
Embedded
Systems for
Transportation
3
Embedded
Field
Controllers
Industrial
Firewall
Digital Signage
Solutions
Embedded
MicroBoxes
Industrial
Barebone
Systems
Dimensions
Industrial
Chassis
Backplanes
Power
Supplies
Peripherals &
Accessories
* All specifications and photos are subject to change without notice.
a x i o m te k . c o m
© 2016 Axiomtek Co., Ltd. All rights reserved.
332