Master Catalog EL900 Series Hardened 10/100BASE-TX to 100BASE-FX Media Converter Value Highly qualified for explosive environmental 10/100BASE Ethernet applications and certified by UL with ISA12.12.01 Class I, Division 2 Classified for use in hazardous locations specifications Features Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment ISA 12.12.01 (UL1604) Class I, Division 2 Classified for use in hazardous locations (Applicable to versions with DC Terminal Block power option) DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode 128K bits buffer memory 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Full wire-speed forwarding rate Alarms for power and port link failure by relay output -40°C to 75°C (-40°F to 167°F) operating temperature range Hardened aluminum case Supports DIN-Rail, Panel or Rack Mounting installation Ordering Information EL900-X-Y-I-P Hardened 10/100BASE-TX to 100BASE-FX Media Converter 10/100TX Options : (X) = A : 10/100BASE-TX (for Port 1 only) 100FX Fiber Options : (Y) = B:Multi Mode (SC) - 2Km (1310nm) C:Multi Mode (ST) - 2Km (1310nm) D:Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km E:Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km F:Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km G:Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km *More 100FX Fiber options also available upon request Q:Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km R:Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km S :Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km T :Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km M:Single Mode (ST) - 20Km (1310nm) N:Single Mode (SC) - 20Km (1310nm) O:Single Mode (SC) - 40Km (1310nm) Installation Type : ( I ) =1 : DIN-Rail (mounting kit is included) Optional Panel mount kit, part number: KP-AA96-480 Power Connector Options : NEW (P) = A : DC Terminal Block* / B : DC Jack**/ C : 24VAC Terminal Block *Option A - The Terminal Block type external power supply are not included. Please order the following part numbers: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP **Option B - The external power adapter and power cord are not included. Please order the following part numbers: 41-136044-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP 171 Media Converters Packet Buffer Memory 128K bits Processing Type Store-and-Forward 148,810pps for 100Mbps Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) Half-duplex back-pressure and IEEE802.3x full-duplex Regulatory Approvals flow control ISO Manufactured in an ISO9001 facility Safety Hazardous locations: Class 1, Division 2 group A,B,C&D UL60950-1, EN60950-1, IEC60950-1 EMI FCC Part 15, Class A EN61000-6-3 -EN55022 -EN61000-3-2 -EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 4KV Air: + / - 8KV - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line D.C. Power Ports: + / - 0.5KV; Line-to-earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/ Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) FED STD 101C Method 5007.1 (Free fall w/ package) -Tested with Cross Weight and Drop High standard table NEMA TS1/2 Environmental requirements for traffic control equipment Power Input Voltage: 10 to 48VDC (DC Terminal Block) or Input 12VDC (DC Jack) or 24VAC, 0.185A (AC Terminal Block) Power Consumption 4.32W MAX. 0.36A @ 12VDC, 0.09A @ 48VDC Overload Current Protection Present Reverse Polarity Protection Present Mechanical Aluminum case Casing IP30 Dimensions 50mm (W) x 110mm (D) x 135mm (H) (1.97" (W) x 4.33" (D) x 5.31" (H)) Weight 0.8Kg (1.76lbs.) Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting Interface Ethernet Port 10/100BASE-TX: 1 port 100BASE-FX: 1 port LED Indicators Per Unit: Power Status (Power 1, Power 2, Fault), Link-Fault-Pass-Through Per Port: 1 0/100TX: Link/Activity, Full-duplex/Collision, Speed 100FX: Link/Activity, Full-duplex/Collision Relay Contact Relay contact rating with current 1A @ 30VDC, 0.5A @ 120VAC Diagrams Ethernet Extenders 14,880pps for 10Mbps -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Wireless Devices Forward and Filtering Rate Operating Temperature Serial Device Servers IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x Media Converters Environment IEEE802.3 10Base-T, Standards Accessories Technology Ethernet Switches Specifications 02 Unit: mm DC JACK DC12V FAULT 50 PWR1 GND PWR2 GND FAULT 135 DC TERMINAL BLOCK 110 AC TERMINAL BLOCK FAULT FAULT Front Side Back Top Bottom www.etherwan.com 172