Master Catalog EL1141 Series IEC61850-3/IEEE1613 Hardened 10/100BASE-TX to 100BASE-FX Media Converter Wide Temp ITS UL508 Value IEC61850 IEEE1613 Specific design for power automation and railway applications with IEC61850-3, IEEE1613 and EN50121-4 standard compliances Specific design for industrial communication applications with UL508 safety certification, focus on various Industrial communication applications Features Complies with IEC61850-3 EMC and Environment requirement, and IEEE1613 standard for substation and power automation Complies with EN50121-4 EMC requirement for Railway applications Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment DIP switch configuration for "Link-Fault-Pass-Through," link down alarm, speed, duplex mode 128K bits buffer memory 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX Full wire-speed forwarding rate Alarms for power and port link failure by relay output Redundant power inputs with Terminal Block and DC Jack -40°C to 75°C (-40°F to 167°F) operating temperature range Hardened aluminum case Supports DIN-Rail, Panel or Rack Mounting installation Ordering Information EL1141-X0B 10/100BASE-TX to 100BASE-FX Hardened Media Converter 100FX Fiber Options : (X) = 1:Multi Mode (SC) - 2Km (1310nm) 2:Multi Mode (ST) - 2Km (1310nm) A:Single Mode (SC) - 20Km (1310nm) B:Single Mode (SC) - 40Km (1310nm) H:Single Mode (ST) - 20Km (1310nm) 6:Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 2Km 7:Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 2Km 8:Multi Mode (SC) WDM -TX:1310nm/RX:1550nm - 5Km 9:Multi Mode (SC) WDM -TX:1550nm/RX:1310nm - 5Km P:Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 20Km Q:Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 20Km R:Single Mode (SC) WDM -TX:1310nm/RX:1550nm - 40Km S:Single Mode (SC) WDM -TX:1550nm/RX:1310nm - 40Km *More 100FX Fiber options also available upon request Power Supply : (Optional) *Option - The Terminal Block type external power supply are not included. Please order the following part numbers: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X (X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP Installation Type : DIN-Rail (mounting kit is included) Optional Panel mount kit, part number: KP-AA96-480 169 Media Converters 14,880pps for 10Mbps Packet Buffer Memory 128K bits Processing Type Store-and-Forward 148,810pps for 100Mbps Half-duplex back-pressure and IEEE802.3x full-duplex flow control -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 EMI FCC Part 15, Class A EN61000-6-4 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS IEC61850-3 & IEEE1613: Substation & Power automation Applications EN50121-4: Railway Applications EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 8KV Air: + / - 15KV - EN61000-4-3 (Radiated RFI Standards) 35V/m, 80 to 1000MHz; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 2KV; Line-to-Line D.C. Power Ports: + / - 2KV; Line-to-earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - EN61000-4-8 (Magnetic Field Standards) 1000A/m @ 50, 60Hz Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/ Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) FED STD 101C Method 5007.1 (Free fall w/ package) -Tested with Cross Weight and Drop High standard table Input Voltage: 12 to 48VDC (Terminal Block) / Input Ethernet Extenders Power 12VDC(DC Jack) Power Consumption 2.4W MAX. 0.2A @ 12VDC, 0.05A @ 48VDC Overload Current Protection Present Reverse Polarity Protection Present Mechanical Aluminum case Casing IP30 50mm (W) x 110mm (D) x 135mm (H) Dimensions (1.97" (W) x 4.33" (D) x 5.31" (H)) Weight 0.8Kg (1.76lbs.) Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting Interface 10/100BASE-TX: 1 port Ethernet Port 100BASE-FX: 1 port Per Unit: Power Status (Power 1, Power 2, Fault), LED Indicators Link-Fault-Pass-Through Per Port: 10/100TX: Link/Activity, Full-duplex/Collision, Speed Speed 100FX: Link/Activity, Full-duplex/Collision Relay contact rating with current 1A @ 30VDC, Relay Contact 0.5A @ 120VAC Diagrams Wireless Devices Forward and Filtering Rate Operating Temperature Serial Device Servers IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x Media Converters Environment IEEE802.3 10BASE-T, Standards Accessories Technology Ethernet Switches Specifications 02 Unit: mm 135 50 - + + 2 er1 w Po 3 D er er GND w Po w Po 110 Front Side Back Top Bottom www.etherwan.com 170