Data Sheet

Master Catalog
EL9020 Series
Hardened 10/100/1000BASE-TX to Gigabit SFP Media Converter
ITS
Wide Temp
Value
UL508
SFP socket flexible for Gigabit fiber optic expansion
Harsh environment design and supports auto
10/100/1000BASE-T Ethernet transmission
Specific design for industrial communication applications with
UL508 safety certification
Features
Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment
Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/
force mode, link down alarm
1000Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
SFP socket offers Gigabit fiber optic selection flexibility
Full wire-speed forwarding rate
Alarms for power and port link failure by relay output
Redundant power inputs with Terminal Block and DC Jack
interfaces
-40°C to 75°C (-40°F to 167°F) operating temperature range
Hardened aluminum case
Supports DIN-Rail, Panel or Rack Mounting installation
Ordering Information
EL9020-00B
10/100/1000BASE-TX to Gigabit SFP Hardened Media Converter
SFP Hardened Type Gigabit Fiber Transceiver: (Optional)
Part Number
Typical Distance
Wavelength (nm)
Cable Type
Connector
EX-1250NSP-SB1L-A
275M/550M
850
MM
Duplex LC
EX-1250TSP-MB4L-A
10KM
1310
SM
Duplex LC
EX-1250TSP-NB6L-A
40KM
1310
SM
Duplex LC
EX-1250TSP-KB8L-A
70KM
1550
SM
Duplex LC
EX-1250TBP-MB1L-A
550M
TX:1310 / RX:1550
MM WDM-A
LC
EX-1250TBP-LB1L-A
550M
TX:1550 / RX:1310
MM WDM-B
LC
EX-1250TBP-MB4L-A
10KM
TX:1310 / RX:1550
SM WDM-A
LC
EX-1250TBP-KB4L-A
10KM
TX:1550 / RX:1310
SM WDM-B
LC
EX-1250TBP-MB5L-A
20KM
TX:1310 / RX:1550
SM WDM-A
LC
EX-1250TBP-KB5L-A
20KM
TX:1550 / RX:1310
SM WDM-B
LC
*More Gigabit options available upon request
Power Supply : (Optional)
*Option A - The Terminal Block type external power supplies are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Option B - The external power adapter and power cord are not included. Please order the following part numbers:
41-136044-X X=1,2,3,4,5
Installation Type : DIN Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480
149
Master Catalog
EL9100 Series
Hardened 10/100/1000BASE-TX to 1000BASE-SX/LX/BX Media Converter
Wide Temp
ITS
Value
UL508
Specific design for industrial communication applications with
UL508 safety certification
Harsh environment design and supports auto
10/100/1000BASE-T Ethernet transmission
DIP switch design for Link-Fault-Pass-Through, fiber auto/
force mode, link down alarm configuration
Features
Complies with NEMA TS1 & TS2 Environmental requirements for
Traffic control equipment
Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/
force mode, link down alarm
10/100/1000Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
Full wire-speed forwarding rate
Alarms for power and port link failure by relay output
Redundant power inputs with Terminal Block and DC Jack
-40°C to 75°C (-40°F to 167°F) operating temperature range
Hardened aluminum case
Supports DIN-Rail, Panel or Rack Mounting installation
Ordering Information
EL9100-X1B
10/100/1000BASE-TX to 1000BASE-SX/LX/BX Hardened Media Converter
Gigabit Options :
(X) = 3:1000BASE-SX (SC) - 550m (850nm)
4:1000BASE-SX (SC) - 2Km (1310nm)
5:1000BASE-SX (ST) - 550m (850nm)
A:1000BASE-LX (SC) - 10Km (1310nm)
B:1000BASE-LX (SC) - 20Km (1310nm)
E:1000BASE-LX (SC) - 40Km (1310nm)
H:1000BASE-LX (ST) - 10Km (1310nm)
I :1000BASE-LX (ST) - 20Km (1310nm)
R:1000BASE-BX (SC) WDM - TX:1310nm/RX:1550nm - 20Km
S:1000BASE-BX (SC) WDM - TX:1550nm/RX:1310nm - 20Km
Power Supply : (Optional)
*Option A - The Terminal Block type external power supplyies are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
**Option B - The external power adapter and power cord are not included. Please order the following part numbers:
41-136044-X
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
Installation Type : DIN-Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480
145
Media Converters
1,488,100pps for 1000Mbps
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F))
Storage
Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient
Relative
Humidity
5% to 95% (non-condensing)
Power
Voltage: 12 to 48VDC (Terminal Block);
Regulatory Approvals
12VDC (DC Jack)
Power
Consumption
7.68W Max, 0.16A @ 48VDC
Overload
Current
Protection
Present
Reverse
Polarity
Protection
Present
Mechanical
ISO
Manufactured in an ISO9001 facility
Safety
UL508
EMI
FCC Part 15, Class A
EN61000-6-4
- EN55022
- EN61000-3-2
- EN61000-3-3
EMS
EN61000-6-2
- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV
Air: + / - 8KV
- EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 2.7GHz; 80% AM
- EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV
D.C. Power Ports: + / - 4KV
- EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line
D.C. Power Ports: + / - 0.5KV; Line-to-earth
- EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM
D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM
- EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz
Environmental
Test
Compliance
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/
Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
FED STD 101C Method 5007.1 (Free fall w/ package)
-Tested with Cross Weight and Drop High standard table
Aluminum case
Casing
IP30
Dimensions
50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight
0.8Kg (1.76lbs.)
Installation
DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
Interface
Ethernet Port
10/100/1000BASE-TX: 1 port
1000BASE-SX/LX/BX: 1 port
LED Indicators
Per Unit: Power Status (Power1, Power2, Power3, Fault),
LFPT
Per Port: 10/100/1000TX: Link/Activity, Speed,
Full-duplex/Collision
1000SX/LX/BX: Link/Activity
Relay Contact
Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
Ethernet Extenders
Input
Diagrams
Wireless Devices
IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x
Forward and
Filtering Rate
Operating
Temperature
Serial Device Servers
IEEE802.3ab 1000BASE-T,
Media Converters
Environment
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX,
Standards
Accessories
Technology
Ethernet Switches
Specifications
02
Unit: mm
135
50
110
-
+
+
-
Top
er3
Back
2
Side
er
Front
w
Po
D
1
er
w
Po
GND
w
Po
Bottom
www.etherwan.com 146
Media Converters
1,488,100pps for 1000Mbps
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage
Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient
Relative
Humidity
5% to 95% (non-condensing)
Power
Input: 12 to 48VDC (Terminal Block); 12VDC (DC Jack)
Power
Consumption
7.68W, Max., 0.16A @ 48VDC
Overload
Current
Protection
Present
Reverse
Polarity
Protection
Present
Mechanical
Regulatory Approvals
ISO
Manufactured in an ISO9001 facility
Safety
UL508
EMI
FCC Part 15, Class A
EN61000-6-3
- EN55022
- EN61000-3-2
- EN61000-3-3
EMS
EN61000-6-2
- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV
Air: + / - 8KV
- EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 2.7GMHz; 80% AM
- EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV
D.C. Power Ports: + / - 4KV
- EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line
D.C. Power Ports: + / - 0.5KV; Line-to-earth
- EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM
D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM
- EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz
Environmental
Test
Compliance
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/
Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
FED STD 101C Method 5007.1 (Free fall w/ package)
-Tested with Cross Weight and Drop High standard table
Aluminum case
Casing
IP30
Dimensions
50mm (W) x 110mm (D) x 135mm (H)
Weight
0.8Kg (1.76lbs.)
Installation
DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
(1.97" (W) x 4.33" (D) x 5.31" (H))
Interface
Ethernet Port
10/100/1000BASE-TX: 1 port
Gigabit SFP: 1 port
LED Indicators
Per Unit: Power Status (Power1, Power2, Power3, Fault),
LFPT
Per Port: 10/100/1000TX: Link/Activity, Speed, Fullduplex/Collision
Gigabit SFP: Link/Activity
Relay Contact
Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
Ethernet Extenders
Voltage
Diagrams
Wireless Devices
IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x
Forward and
Filtering Rate
Operating
Temperature
Serial Device Servers
IEEE802.3ab1000BASE-T,
Media Converters
Environment
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX,
Standards
Accessories
Technology
Ethernet Switches
Specifications
02
Unit: mm
135
50
110
Front
Side
Back
Top
Bottom
www.etherwan.com 150