Master Catalog ED3538 Hardened 10/100BASE-TX PoL/PoE Ethernet Extender over Copper Wires Value Power over Ethernet up to 1.2 kilometers over pair copper wire Ethernet extension solution with high transmission data rate up to 100Mbps Ethernet extension up to 2.2 kilometers PoL (Power over Link) Advanced Single Cable Solution for Power and Data ED3538T Features Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment MAX. 1.2km Power and data are transmitted over copper pairs ED3538R PoE PoE IP camera ED3538R supports IEEE802.3at PSE standard for PoE/PD applications Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Supports Power Over Link application up to 1,200 meters (3,937 Auto-MDI/MDIX ft.) for Max. 5 watts power consumed PoE powered devices 100Mbps communications link over existing copper telephone wire Auto data rate negotiation for Ethernet extension interface Operates transparent to higher layer protocols Redundant power inputs with Terminal Block and DC Jack Six speeds with speed indicator LEDs on front panel of unit, -40°C to 75°C (-40°F to 167°F) operating temperature range and Up to 100Mbps @ about 300meters (984 ft.); 1Mbps @ about tested at -40°C to 85°C (-40°F to 185°F) 2,200meters (7,2186 ft.) Hardened aluminum case Supports DIN-Rail, Panel and Rack mount installation Ordering Information ED3538 Hardened PoL/PoE Ethernet Extender over Copper Wires (including one ED3538T and one ED3538R) Note: ED3538T is PoL Transceiver and ED3538R is PoL Receiver Power Supply: The Terminal Block type external power supplies are not included. Please order the following part numbers: Power supply suggestion SDR-120-48 / DR-120-48 (120W 48VDC) SDR-240-48 (240W 48VDC) SDR-480-48 (480W 48VDC) 30 watts PoE application For one pair For three pairs For seven pairs Diagrams Unit: mm ED3538T ED3538R Front 279 Top / Bottom 110 135 145.5 50 Side Top / Bottom Front Specifications Environment IEEE802.3x Full-duplex flow control Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) Media Converters Transparent to higher layer protocols Processing Type -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Power Input Power Consumption Terminal Block: 46 - 57VDC DC JACK: 48VDC 2.5A @ 48VDC (Peak current 3.26A) Max. 65W with Power over Link (PoL) function enabled ED3538T: Max. 5W (without PoL / PoE) ED3538R: Max. 5W (without PoL / PoE) Regulatory Approvals Max. 35W (with PoE only) Supports overload current protection Supports reverse polarity protection ISO Manufactured in an ISO9001 facility Safety UL60950-1, IEC60950-1 EMI FCC Part 15, Class A EN61000-6-4 -EN55022 -EN61000-3-2 -EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 4KV Air: + / - 8KV - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV D.C. Power Ports: + / - 4KV - EN61000-4-5 (Surge Standards) Signal Ports: + / - 2KV; Line-to-Line D.C. Power Ports: + / - 0.5KV; Line-to-earth - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.) Mechanical Casing Aluminum case IP30 Dimensions 50mm (W) x 110mm (D) x 135mm (H) (1.97" (W) x 4.33" (D) x 5.31" (H)) Weight 0.8Kg (1.76lbs.) Installation DIN-Rail (Top hat type 35mm), Panel, Rack Mounting Interface Ethernet Port ED3538T/R: 1x RJ-45 port,10/100BASE-TX Full-duplex, ED3538R: 1x PoE/PSE port Auto-Negotiation, Auto-MDI/MDIX Speed: 10/100Mbps Distance: 100meters (328ft.) Cable: 100BASE-TX: UTP CAT. 5 (4-pair wire) Ethernet Extender Port Port: One RJ-11 One 2-pin Terminal Block (Wire range: 12 - 30 AWG) Distance: Power over Link (PoL) Enable Distance 300M 400M 600M 800M 1000M 1200M 100Mbps 90Mbps 60Mbps 45Mbps 35Mbps 20Mbps Power over Link (PoL) Disable (Power Supply Applies on ED3538R) Distance 1400M 1600M 1800M UP to 2200M ED3538R PoE Output 30.0W 15.4W 14.0W 9.5W 7.0W 5.0W Data Rate Data Rate 15Mbps 10Mbps 3Mbps 1Mbps ED3538R PoE Output 30.0W 30.0W 30.0W 30.0W Ethernet Extenders Protocols Operating Temperature Wireless Devices IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3x, IEEE802.3af, IEEE802.3at PoE/PSE Serial Device Servers Standards Accessories Technology 03 Ethernet Switches Ethernet Extenders NOTE: Reference Performance on 24 AWG copper wire (0.5mm diameter, 1-pair wire, Cable impendence: 100ohm) DIP switch ED3538T: PoL: ON/OFF, Type: Perf/Std ED3538R: Mode: Loc/Rmt, Type: Perf/Std LED Indicators Per Unit: Power Status (Power) Per Port: 10/100TX: Link/Activity, Full-duplex Line Speed: Six indicators for 100/80/60/40/20Mbps and Link below 20Mbps PoE: Power over Ethernet function availability www.etherwan.com 280