AX93300 PATA to SATA Converter Module Card 2 3 Features ● Supports SATA storage device connection through IDE channel of main board ● PATA 44-pin to SATA Gen 1, and supports 2.5 SATA hard drive ● Suitable for NA-100 Overview SOHO Series 1 SMB Series Accessories 4 1. JMicron JM20330 chipset 2. SATA power connector 3. SATA data channel connector 4. Pins for 44-pin PATA connector Introduction The AX93300 is a DOM type adapter card for PATA to SATA interface. It breaks the limitation of SATA storage device support on concurrent platform usage, and also enhances storage efficiency. This module is suitable for our NA-100 platform. Ordering Information Specifications Specification Interface Chipset EIDE S-ATA Connector AX93300 IDE JMicron JM20330 ATA 66/100/133 pin (44-pins) Supports data and power pin connector Supports S-ATA Gen 1 interface of 1.5GBps Compliance with S-ATA 1.0a specifications Mechanical/ Environmental Other Feature * Transparent to BIOS or OS, no driver is necessary * Can be installed in the NA-0043 series, NA-806 series OS Compatibility Linux Red Hat, Linux kernel 2.4 & 2.6 and Windows® XP/2000 Operating Temp. 0° ~ +60°C (32°F ~ 140°F) Storage Temp. -20° ~ +70°C (-4°F ~ +158°F) Humidity 10% - 95% RH, non-condensing Dimensions 46 mm x 27 mm * All specifications and photos are subject to change without notice. © 2013 Axiomtek Co., Ltd. All rights reserved. PATA to SATA converter module Packing List 1 x SATA power cable, 1 x SATA data cable Dimensions a x i o m te k . c o m 37