IMB202 Series Quick Installation Guide IMB202 Series Quick

IMB202 Series Quick Installation Guide
I.
Checklist
9 IMB202 LGA775 ATX Industrial
9 Product Information CD x 1
9 2-pin Mini Jumper Caps x 15
Motherboard x 1
9 Quick Installation Guide x 1
SATA Signal Cable x 1
Note: Please contact your local vendors if any damaged or missing items.
DO NOT apply power to the board if any damaged components.
II.
Jumper Settings
Before applying the power to IMB202 Series, please make sure all jumper
settings are defaulted as the following table:
Description
COM1
Function
Jumper Setting
JP1
JP2
JP3
RS-422
JP1
JP2
JP3
RS-485
JP1
JP2
JP3
RS-232
(Default)
Jumper
Function
Jumper Setting
Clear CMOS Normal
(Default)
PCIe Slot
PCIe x1
Function
(Default)
JP5
JP8, JP9
Function
Clear CMOS
PCIe x4
Jumper Setting
JP5
JP8, JP9
Select
4
©Copyright 2008 AXIOMTEK Co., Ltd.
Version A1 August 2008
Printed in Taiwan
9418F202010E
©Copyright 2008 AXIOMTEK Co., Ltd.
Version A1 August 2008
Printed in Taiwan
9418F202010E
1
Please refer to the IMB202 Series Product Information CD for complete User’s Manual, drivers and utilities.
Please refer to the IMB202 Series Product Information CD for complete User’s Manual, drivers and utilities.
V. Board Layout
IMB202 Series Quick Installation Guide
IMB202 Series Quick Installation Guide
Watchdog
Function
Function
Jumper Setting
JP4
GPIO
JP4
Reset
JP4
Connector
CN24
CN54
CN25
SATA0 CONNECTOR
CN55
PCI4 SLOT
CN26
CN56
PCI2 SLOT
CN27
ATX POWER
CONNECTOR
FAN1 CONNECTOR
PCI1 SLOT
PCI3 SLOT
COM4 CONNECTOR
CN28
PCIe x 16 SLOT
CN29
IV.
FRONT PANEL
CONNECTOR
CN53
CN57
CN58
Front Panel Connectors (CN58)
Connectors
Function
Connector
Function
Connector
INTERNAL BATTERY
BAT1
DIO CONNECTOR
CN30
INTERNAL BUZZER
BU1
FAN2 CONNECTOR
CN32
VGA CONNECTOR
CN1
DIMM2 SOCKET
CN35
COM1 CONNECTOR
CN2
FDD CONNECTOR
CN36
AUDIO CONNECTOR
CN3
CPU FAN CONNECTOR
CN37
KEYBOARD/MOUSE
DIN CONNECTOR
LPT CONNECTOR
CN4
DIMM1 SOCKET
CN38
CN5
USB CONNECTOR (8/9)
CN39
LAN2 CONNECTOR
(INTEL)
LAN1 CONNECTOR
(REALTEK)
COM2 CONNECTOR
„
Power LED
Pins 1, 3, 5 connect the system power LED indicator to its respective switch on
the case. Pin 1 is +, and pin 5 assigned to -. Pin 3 is defined as NC.
„
External Speaker and Internal Buzzer Connector
Pins 2, 4, 6, 8 can be connected to the case-mounted speaker unit or internal
CN6
USB CONNECTOR (4/5)
CN40
CN7
CN41
CN11
WAFER M/S
CONNECTOR
DIMM3 SOCKET
CN42
CN12
SATA4 CONNECTOR
CN43
CN13
SATA5 CONNECTOR
CN44
CN15
DIMM4 SOCKET
CN45
HDD Activity LED
This connector extends to the hard drive activity LED on the control panel. This
CN17
CN46
LED will flash when the HDD is being accessed. Pins 13 and 14 can be
CN47
LAN2 SPEED LED
CONNECTOR
LAN2 LINK LED
CONNECTOR
ATX 12V 4-PIN
CONNECTOR
LAN1 SPEED LED
CONNECTOR
LAN1 LINK LED
CONNECTOR
COM3 CONNECTOR
CN19
WAFER K/B
CONNECTOR
USB CONNECTOR (6/7)
CN20
SATA3 CONNECTOR
CN50
PCIe x 1 SLOT
CN21
SATA2 CONNECTOR
CN51
2
Function
USB CONNECTOR
(10/11)
SATA1 CONNECTOR
CN23
Disabled
Trigger Mode
III.
Connector
PCIe x 4 SLOT
buzzer.
„
„
Power Button
Pins 9 and 10 connect the front panel’s ATX power button to the card.
Hardware Reset
Pins 11 and 12 are designed for Hardware Reset.
„
connected to the hard disk drive and front panel HDD LED.
©Copyright 2008 AXIOMTEK Co., Ltd.
Version A1 August 2008
Printed in Taiwan
9418F202010E
©Copyright 2008 AXIOMTEK Co., Ltd.
Version A1 August 2008
Printed in Taiwan
9418F202010E
3
Please refer to the IMB202 Series Product Information CD for complete User’s Manual, drivers and utilities.
Please refer to the IMB202 Series Product Information CD for complete User’s Manual, drivers and utilities.
Jumper
IMB202 Series Quick Installation Guide