DOMINANT

DOMINANT
Opto Technologies
Innovating Illumination
TM
DATA SHEET :
PrimaxPlus
AlInGaP : MAx-PHG
Primax
TM
Synonymous with function and performance, enter the Primax, the new
era of high intensity illumination in LED. With its high flux output and high
luminous intensity, Primax transcends today LED lightings technology and
how we perceive it. The small package outline and high intensity make it
an ideal choice for backlighting, signage, exterior automotive lighting and
decorative lighting.
Features:
>
>
>
>
>
>
>
>
Super high brightness surface mount LED
115° viewing angle.
Compact package outline (LxW) of 3.7 x 3.5 mm.
Ultra low height profile - 0.8mm.
Low thermal resistance.
Compatible to IR reflow soldering.
Superior corrosion resistant
Environmental friendly; RoHS compliance.
Applications:
> Lighting: garden light, architecture lighting, general lighting. etc
> Automotive: interior applications, eg: switches, telematics, climate control
system, dashboard, etc.
> Automotive: exterior applications, eg: signal lighting, Center High Mounted
Stop Light (CHMSL).
All rights reserved. Product specifications are subject to change without notice.
1
22/01/2014 V.1.0
DOMINANT
TM
AlInGaP: MAx-PHG
Opto Technologies
Innovating Illumination
Optical Characteristics at Tj=250C
Viewing
Angle˚
Part Ordering
Number
Color
MAA-PHG-Q3S2-1
Amber, 615nm
Luminous Flux @ 350mA (lm)
Min.
Typ.
Max.
115
34.8
48.0
59.0
NOTE
1. Luminous intensity is measured with an accuracy of ± 11%.
2. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
Electrical Characteristics at Tj=250C
Part Number
MAx-PHG
Vr @ Ir = 10 uA
Vf @ If = 350 mA
Min. (V)
Typ. (V)
Max. (V)
Min. (V)
2.05
2.45
2.80
12
Forward Voltages are tested using a current pulse of 1 ms and has an accuracy of ± 0.1 V.
Absolute Maximum Ratings
Maximum Value
Unit
DC forward current
400
mA
Peak pulse current (tp<=10ms, Duty cycle=0.10)
750
mA
Reverse Voltage
12
V
ESD threshold (HBM)
2000
V
LED junction temperature
150
˚C
Operating temperature
-40 … +125
˚C
Storage temperature
-40 … +125
˚C
2
22/01/2014 V.1.0
DOMINANT
TM
Opto Technologies
AlInGaP: MAx-PHG
Innovating Illumination
Wavelength Grouping at Tj=250C
Color
Group
MAA; Amber
Wavelength distribution (nm)
Full
612 - 624
W
612 - 616
X
616 - 620
Y
620 - 624
Dominant wavelength is measured with an accuracy of ± 1 nm at a drive current of 140mA
Luminous Intensity at Tj=250C
Brightness Group
Luminous Intensity @ If=350mA (mcd)
Q3
34.8 ... 39.8
R2
39.8 ... 45.2
R3
45.2 ... 51.7
S2
51.7 ... 59.0
Luminous intensity is measured with an accuracy of ± 11%.
Vf Binning (Optional)
Vf Bin @ 350mA
Group
Forward
Wavelength
Voltage (V)
distribution (nm)
V2
2.05 ... 2.20
V3
2.20 ... 2.35
V4
2.35 ... 2.50
V5
2.50 ... 2.65
V6
2.65 ... 2.80
Forward voltage, Vf is measured with an accuracy of ± 0.1 V.
Please consult sales and marketing for special part number to incorporate Vf binning.
3
22/01/2014 V.1.0
DOMINANT
TM
AlInGaP: MAx-PHG
Opto Technologies
Innovating Illumination
Forward
Current
VsForward
Forward Voltage
Forward
Voltage
Vs
Forward
Voltage
VsForward
ForwardCurrent
Current
Forward
Voltage
Vs
Current
Relative
Intensity
Vs Forward
Current
Relative
Intensity
Vs Forward
Current
Relative
Intensity
VsForward
Forward
Current
Relative
Intensity
Vs
Current
1.4
1.2
1
0.8
0.6
0.4
0.2
0
Flux Flux
1.4
1.6
1
1.2
1.4
0.8
1.2
1
2
16
2
10
2
1 81.5
1.5
6
14 1
2
0.5 0.5
10
50
20
30
100
500
600
40
150
600
700
0
50
300
400
400
500
Forward
Current; mA
Forward Current; mA
60
200
700
800 800
0
0
1.2
0
0
Radiation
Pattern Temperature
Forward Current
Vs Ambient
Flux
250
200
150
100
350
0.8
50° 20
300
0.6
15
250
60°
0.4
0.4
200
10
70°
0.2
150
5
0.2
80°
1000
0
300
50 200
0 10 20
0
90°
50
400
30
40
0
500
50
60
600
70
80
700
800
90 100
(mA)
AmbientIFTemperature
1
1
0.92.5
0.9
Amber
0.8
0.8
2
Amber
0.7
0.7
0.6
0.6 1.5
Yellow
0.5
0.5
0.4 1
0.4
0.3
0.3 0.5
0.2
0.2
0.1
0
0.1
0
200
300
0
500
550
500
550
0 10 20 30 40 50 60 70 80 90 100110120130
0 10 20 30 40 50 60 70 80 90 100110120130
700
700
2.4
200
800
800
Variables
Vf
Red
400
600
600
500
600
700
650
700
750
650
700
IF (mA)
Wavelength, nm
Wavelength; nm
800
800
750
Ambient Temperature (C)
Ambient Temperature (C)
AllowableMaximum
ForwardCurrent
Current
Vs
Duty Ratio
(Ta=25 Deg C)
Ambient
Temperature
Maximum Current
VsVsAmbient
Temperature
10000
450
250
Forward Current;
Allowable
Forward mA
Current
0
0.6
RelativeIntensity
Intensity
Relative
300
Variables
Variables
Forward Current
Forward Current
0.8
400
1
25
2.2
3
Maximum Current vs Solder-Point Temperature
Variables
250
Forward Current
400
350
Forward Current; mA
350
Forward Current, mA
400
150
Relative Intensity vs Wavelength
Relative Intensity Vs Wavelength
1.0
450
30
1.2
2
3.5
Variables
10°
0°
Current
Vs
40°
1.8
100
V
Forward Current; mA
(mA)
IFIF(mA)
Ambient Temperature
Maximum
35 Current Vs Ambient Temperature
1.4
450
1.6
Forward Voltage Vs Forward Current
1.8
30°
20°
Maximum
1.4
50
400 500
500
600
200200 300300 Forward
400
600
Voltage,
IF (mA)
IFIntensity
(mA)
Relative
Vs Forward Current
1.6
Vf
Vf
2.5 2.5
0.5
0.2
0.2
0
0 0
0
200
300
Variables
Variables
318 3
14
1.512
0.61
0.8
0.8
0.6
0.4
0.6
0.4
0.2
0.4
200
22
3.5 3.5
2.5
20
Variables
Variables
Forward Voltage; V
Forward Current, mA
1.6
2.2
1.4
1.8
2
1.6
1.2
1.8
Relative
Intensity;
Normalized
at at
140mA
Normalized
Flux
at 350mA
Relative
Intensity;
Normalized
20mA
1.8
200
1000
300
Rja=120
Rja+ 70K/W
250
150
200
100
150
100
100
50
10
50
0 1
0
150
100
50
0
10
100
10 20 30 40 50 60 70 80 90 100 110 120
0
0 10 20 30 40 50 60 70 80 90 100110120130
Duty Ratio, %
Ambient Temperature
Ambient Temperature (C)
200
10 20 30 40 50 60 70 80 90 100 110 120
Solder-Point Temperature
4
22/01/2014 V.1.0
DOMINANT
TM
AlInGaP: MAx-PHG
Opto Technologies
PRELIMINARY
UNDER DEVELOPMENT
Innovating Illumination
DOMINANT Opto Technologies
Engineering reference data are not verified. The specifications are subject to
PrimaxPlus • AlInGaP: MAx-PHG
Package
Outlines
change
without notice.
PrimaxPlus AlInGaP: MAX-PHG
Material

Super high brightness surface mount LED.

120 viewing angle.

Compact package outline (LxW) of 3.7 x 3.5 mm. Ultra low height profile – 0.8 mm.

Low thermal resistance.

Superior corrosion resistant.

Compatible to IR reflow soldering.
Material
Lead-frame
Cu Alloy With Au Plating
Package
High Temperature Resistant Plastic
Encapsulant
Silicone Resin
Soldering Leads
05/04/13
Au Plating
PrimaxPlus AlInGaP MAX-PHG -pv2.docx
5
Page 1 of 8
22/01/2014 V.1.0
MAA, Amber
DOMINANT
TM
Opto Technologies
Innovating Illumination
Recommended Solder Pad
Full
612 – 624
W
612 - 616
X
616 – 620
Y
620 - 624
AlInGaP: MAx-PHG
Dominant wavelength is measured with an accuracy of 1 nm at a drive current of 350 mA.
Solder Pad Design.
05/04/13
PrimaxPlus AlInGaP MAX-PHG -pv2.docx
6
Page 4 of 8
22/01/2014 V.1.0
PRELIMINARY
UNDER DEVELOPMENT
AlInGaP: MAx-PHG
DOMINANT
Opto Technologies
Opto DOMINANT
Technologies
TM
Innovating Illumination
Engineering reference data are not verified. The specifications are subject to
change without notice.
Taping and orientation
• Reels come in quantity of 1000 units.
Taping And Orientation.
• Reel diameter is 180 mm.
Reels come in quantity of 1000 units.
Reel diameters are 180 mm.
7
05/04/13
PrimaxPlus AlInGaP MAX-PHG -pv2.docx
22/01/2014 V.1.0
Page 6 of 8
DOMINANT
TM
AlInGaP: MAx-PHG
Opto Technologies
Innovating Illumination
Packaging Specification
8
22/01/2014 V.1.0
DOMINANT
TM
AlInGaP: MAx-PHG
Opto Technologies
Innovating Illumination
Packaging Specification
Moisture sensitivity level
Barcode label
DOMINANT
ROHS Compliant
LOT NO : lotno
PB Free
PART NO : partno
QTY : product quantity per reel S/N : serial no D/C: date code
GROUP : group
Reel
Label
Moisture absorbent material +
Moisture indicator
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Average 1pc Primax
1 completed bag (1000pcs)
0.041
0.034
160 ± 10
190
10
Weight
Weight(gram)
(gram)
Cardboard
Box
DOMINANT TM
For Primax
TM
Cardboard Box
Size
Dimensions (mm)
Empty Box
Weight (kg)
Reel / Box
Quantity / Box (pcs)
Small
300 x 250 x 250
0.58
15 reels MAX
15,000 MAX
Large
416 x 516 x 476
1.74
96 reels MAX
96,000 MAX
9
22/01/2014 V.1.0
DOMINANT
TM
AlInGaP: MAx-PHG
Opto Technologies
Innovating Illumination
Recommended Pb-free Soldering Profile
Classification Reflow Profile (JEDEC J-STD-020C)
300
255-260˚C
10-30s
275
250
225
Temperature (˚C)
Ramp-up
3˚C/sec max.
217˚C
200
60-150s
175
150
125
Rampdown
6˚C/sec
max.
100
75
Preheat 60-180s
50
25
480s max
0
50
100
150
200
Time (sec)
10
22/01/2014 V.1.0
DOMINANT
TM
AlInGaP: MAx-PHG
Opto Technologies
Innovating Illumination
Revision History
Page
Subjects
Date of Modification
-
Initial Release
22 Jan 2014
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies.
11
22/01/2014 V.1.0
DOMINANT
TM
Opto Technologies
AlInGaP: MAx-PHG
Innovating Illumination
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED
Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries
and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs
are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More
information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
Please contact us for more information:
DOMINANT Opto Technologies Sdn. Bhd.
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia
Tel: (606) 283 3566 Fax: (606) 283 0566
E-mail: [email protected]
DOMINANT
Opto Technologies
Innovating Illumination
TM