DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM AlInGaP : DWx-PJG TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > High brightness surface mount LED using thin film technology. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ IF = 50mA Min. Typ. Max. Flux @ IF=50mA,mlm Typ. 120 1400.0 2125.0 2850.0 5750.0 Red, 620nm 120 2240.0 2850.0 3550.0 7700.0 DWA-PJG-X2Y-1 Amber, 617nm 120 2240.0 3550.0 4500.0 9600.0 DWY-PJG-X2Y-1 Yellow, 589nm 120 2240.0 3550.0 4500.0 9600.0 DWS-PJG-W2X-1 Super Red, 632nm DWR-PJG-X2Y1-1 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf bining is also available upon request. Bining scheme is as per following table. Electrical Characteristics at Tj=25˚C Vf @ If = 50mA Part Number Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10uA Min. (V) DWx-PJG 2.05 2.20 2.50 12 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. 2 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Absolute Maximum Ratings Maximum Value Unit DC forward current 70 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +125 ˚C 200 mW 300 K/W 130 K/W LED junction temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) Characteristics Symbol Temperature coefficient of O dom (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) TC O Part Number dom (typ) TCV TCIV IF = 50mA; 0 ˚C <= T <= 100 ˚C 3 Value DWS-PJG 0.04 DWR-PJG 0.05 DWA-PJG 0.06 DWY-PJG 0.08 DWS-PJG DWR-PJG -2.2 -2.2 DWA-PJG -2.0 DWY-PJG -1.9 DWS-PJG -0.4 DWR-PJG -0.5 DWA-PJG -0.7 DWY-PJG -0.9 Unit nm / K mV / K %/K 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Wavelength Grouping at Tj= 25˚C Color Group Wavelength distribution (nm) DWS, Super Red Full 625 - 640 DWR; Red Full 620 - 630 DWA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 585 - 594 X 585 - 588 Y 588 - 591 Z 591 - 594 DWY; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm at a drive current of 50mA Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0...1800.0 X1 1800.0...2240.0 X2 2240.0...2850.0 Y1 2850.0...3550.0 Y2 3550.0...4500.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf @ If = 50mA Forward Voltage (V) 51 2.05 ... 2.20 52 2.20 ... 2.35 53 2.35 ... 2.50 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing for special part number to incorporate Vf binning. 4 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Forward Current vs Forward Voltage Forward Current vsVs Forward Voltage Forward Voltage Forward Current Relative Intensity Vs Forward Forward CurrentCurrent Relative Intensity Vs Current Relative Luminous Intensity Vs Forward 1 1.4 1 60 60 2.2 50 50 Forward Current; mA ForwardVoltage; Current; VmA Forward 7070 2.3 Relative Intensity;Normalized Normalizedatat50mA 50mA Relative Intensity; Relative Intensity; Normalized at 50mA 1.2 1.21.6 1.2 0.8 0.8 1 0.6 0.60.8 0.4 0.6 0.4 0.2 0.4 0.2 0.2 0 0 0 0 30 30 2 20 20 10 1.9 10 0 01.8 1.7 10 20 30 40 50 60 70 80 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 70 80 80 1.7 0 Forward Current, mA Forward Current, mA Forward Current, mA Maximum Current Vs Ambient Temperature Maximum Current VsVs Ambient Temperature Maximum Current Ambient Temperature 1 80 1.8 1.9 1.8 1.9 20 Relative Intensity Relative Intensity Allowable Forward Current, mA Forward Current, Forward Current, mAmA Forward Current, mA 70 70 60 2.1 2.2 2.3 2.1 2.2 2.380 60 Forward Voltage; V Forward ForwardVoltage; Current,VmA Relative Intensity Vs Wavelength Multiple X-Y Relative Intensity Vs Plot Wavelength 0.7 0.8 0.8 60 60 50 0.6 0.7 0.7 100 0.5 0.6 0.6 50 50 40 Variables 30 30 20 10 0.2 0.3 0.3 0.1 0.2 0.2 0.1 0 0.1 20 20 10 0 10 10 10 20 30 40 50 60 70 80 90 100 Yellow 0 0 10 1020Ambient 50 5060 6070 7080 8090 90100100 2030 3040 40Temperature 500 00 1 500 1 450 Super Amber Amber Red Red Ambe Super Red Red 0.4 0.5 0.5 0.3 0.4 0.4 40 40 30 550 550 550 600 650 700 Wavelength; 600 650 700 10650 nm 750 750 750100 850 Wavelength; nm Duty Ratio, % Wavelength Ambient Temperature Ambient Temperature Radiation Pattern Allowable Forward Current Vs Duty ratio 30° 1000 Allowable Forward Current; mA 2 2 40 10.9 1 1000 0.9 0.9 0.8 Yellow 80 70 80 0 0 0 40 402.1 20° 10° 0° 1.0 40° 0.8 100 10 50° 0.6 60° 0.4 70° 0.2 80° 1 1 10 90° 100 0 Duty Ratio, % 5 05/09/2014 V6.0 Yellow DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination DomiLED • AllnGaP : DWx-PJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone resin Soldering Leads Sn Plating 6 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Recommended Solder Pad 7 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Packaging Specification 9 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 05/09/2014 V6.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 06 Oct 2010 3 Add thermal resistance and charactheristics 11 Feb 2011 2, 5 Add Typical Total Flux Value Add graph “Allowable Forward Current vs Duty Ratio” Update Operating Temperature 09 Mar 2011 2 Add part no: DWS-PJG-W2X-1 04 Apr 2011 2, 4, 5 Update Vf Binning Update Graph: Relative Luminous Intensity Vs Forward Current 22 Dec 2011 6 Update Package Outline 05 Sep 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 05/09/2014 V6.0 DOMINANT TM Opto Technologies AlInGaP : DWx-PJG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM