DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM InGaN White : DWW-MKG TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > > High brightness surface mount LED. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Superior corrosion resistance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Optical Characteristics (Tj=25˚C) Part Ordering Number DWW-MKG-W2X-1 Color White Viewing Angle˚ Luminous Intensity @ 30mA IV (mcd) Min. Typ. Max. 1400.0 120 2240.0 Total Flux @ 30mA mlm (Typ) 2850.0 6500.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. Electrical Characteristics at Tj=25˚C Part Number Min. (V) DWW-MKG 3.00 Vf @ If = 30mA Typ. (V) Max. (V) 3.40 Vr @ Ir = 10uA Min. (V) 5 3.80 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 300 mA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +110 ˚C 200 mW 300 K/W 130 K/W Reverse voltage; Ir (max) = 10µA Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 09/04/2012 V2.0 10 80 50 90 05 25 60 55 88 82 88 53 86 26 86 91 97 31 89 02 88 82 88 52 84 71 84 30 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination DWW, White Color Grouping 3 0.3005 0.2825 0.2960 0.2955 0.3100 0.2970 0.3070 0.3120 0.3386 0.3426 0.3386 0.3591 0.3484 0.3571 0.3484 0.3730 0.3205 0.2956 0.3197 0.3131 0.3288 0.3081 0.3288 0.3282 0.3582 0.3715 0.3582 0.3792 4 0.3045 0.2715 0.3005 0.2825 0.3130 0.2840 0.3100 0.2970 0.3386 0.3235 0.3386 0.3426 0.3484 0.3388 0.3484 0.3571 0.3130 0.2840 0.3100 0.2970 0.3205 0.2956 0.3197 0.3131 0.3582 0.3542 0.3582 0.3715 1 0.2960 0.2590 0.291 0.2680 0.3045 0.2715 0.3005 0.2825 0.3288 0.3081 0.3288 0.3282 0.3386 0.3235 0.3386 0.3426 0.3100 0.2970 0.3070 0.3120 0.3197 0.3131 0.3189 0.3302 0.3484 0.3388 0.3484 0.3571 0.3800 0.3700 JL KK KL NK NL OK OL LK LL MK ML PK PL PL 0.3600 OL PK 0.3500 NL 0.3400 0.3300 ML 0.3100 MK LL 0.3000 OK NK 0.3200 LK KL 0.2900 KK JL 0.2800 0.2700 JK 0.2600 0.2500 0.2400 0.2300 0.2700 0.2800 0.2900 0.3000 0.3100 0.3200 0.3300 0.3400 0.3500 0.3600 0.3700 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 Cx 0.2960 0.2910 0.3005 0.3045 Cy 0.2590 0.2680 0.2825 0.2715 Cx 0.291 0.2850 0.2960 0.3005 Cy 0.2680 0.2790 0.2955 0.2825 Cx 0.3045 0.3005 0.3100 0.3130 Cy 0.2715 0.2825 0.2970 0.2840 Cx 0.3005 0.2960 0.3070 0.3100 Cy 0.2825 0.2955 0.3120 0.2970 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3081 0.3282 0.3426 0.3235 Cx 0.3288 0.3288 0.3386 0.3386 Cy 0.3282 0.3453 0.3591 0.3426 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3235 0.3426 0.3571 0.3388 Cx 0.3386 0.3386 0.3484 0.3484 Cy 0.3426 0.3591 0.3730 0.3571 Cx 0.3100 0.3197 0.3205 0.3130 Cy 0.2970 0.3131 0.2956 0.2840 Cx 0.3070 0.3189 0.3197 0.3100 Cy 0.3120 0.3302 0.3131 0.2970 Cx 0.3197 0.3288 0.3288 0.3205 Cy 0.3131 0.3282 0.3081 0.2956 Cx 0.3189 0.3288 0.3288 0.3197 Cy 0.3302 0.3452 0.3282 0.3131 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3388 0.3571 0.3715 0.3542 Cx 0.3484 0.3484 0.3582 0.3582 Cy 0.3571 0.3730 0.3792 0.3715 Bin JK Dominant White Bin Structure 0.3900 Dominant color coordinate is measured with an accuracy of ± 0.01. 3 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0...1800.0 X1 1800.0...2240.0 X2 2240.0...2850.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf Bin @ 30 mA Forward Voltage (V) V1 3.00 ... 3.30 V2 3.30 ... 3.60 V3 3.60 ... 3.90 Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf bining. 4 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Forward Voltage Vs Forward Current 1.6 4 1.4 3.5 1.2 3 Forward Voltage; V Relative Intensity; Normalized at 30mA Relative Intensity Vs Forward Current 1 0.8 0.6 0.4 2.5 2 1.5 1 0.2 0.5 0 0 0 10 20 30 40 50 0 10 20 30 40 50 Forward Current, mA Forward Current; mA Maximum Current Vs Ambient Temperature Relative Intensity Vs Wavelength 1 0.9 50 0.8 Relative Intensity Forward Current, mA 60 40 30 20 0.7 0.6 0.5 0.4 0.3 0.2 10 0.1 0 0 0 10 20 30 40 50 60 70 80 90 100 110 120 400 450 500 550 600 650 700 Wavelength, nm Ambient Temperature Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 5 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Power DomiLED • InGaN White : DWW-MKG Package Outlines TM Material Material Lead-frame Cu Alloy With Au Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Au Plating 6 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Recommended Solder Pad 7 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Packaging Specification 9 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 09/04/2012 V2.0 DOMINANT TM InGaN White : DWW-MKG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 16 Mar 2012 2, 4 Add Thermal resistance, Add Vf binning option 09 Apr 2012 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 09/04/2012 V2.0 DOMINANT TM Opto Technologies InGaN White : DWW-MKG Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Sdn. Bhd. Shanghai Representative Office Rm 305, Hongwell International Plaza No. 1600 Zhong Shan(W) Rd, Xuhui District, Shanghai, China 200235 Tel: +86 21 5403 5655, +86 21 5403 5818 Fax: +86 21 5403 6055 E-mail: [email protected] DOMINANT Opto Technologies Sdn. Bhd. Shenzhen Representative Office Rm 1808, Block B, South International Plaza No 3013, Yitian Road, Futian District, Shenzhen, 518048 P.R. China Tel: +86 755 8282 1781 E-mail: [email protected] DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. RM 211 SUNTEAK CITY APT. 513-15 Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-725, Korea Tel: +82-31-701-5203 Fax: +82-31-701-5204 E-mail: [email protected] DOMINANT U.S.A Sales Office 25 Rockaway Road, 08833 Lebanon, New Jersey, USA Tel: (908) 439-9930 Cell: (908) 343-5810 Fax: (908) 439-9929 E-mail: [email protected] DOMINANT Europe Sales Office DOMINANT Semiconductors Europe GmbH Raiffeisenstr. 38, 74906 Bad Rappenau Germany Tel: +49 (0) 7264-89010-10 / +49 (0) 7264-89010-11 Cell: +49 173-6907370 / +49 173-6907751 Fax: +49 (0) 7264-89010-29 E-mail: [email protected]; [email protected] DOMINANT India Sales Office DOMINANT C-11,Vasanth Business Centre #86, TTK Road, Alwarpet Chennai - 600 018, INDIA Tel: 91-44-42030616 / 516 Cell: 91-9444920537 Fax: 91-9444920616 E-mail: [email protected] Innovating Illumination Opto Technologies TM