DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATASHEET: Power DomiLEDTM InGaN White : DWW-YJG(5K8L) TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > > High brightness surface mount LED. Long lifetime up to 50,000 hours due to silicone encapsulation. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Optical Characteristics (Tj=25˚C) Part Ordering Number Color Total Flux @ IF=30mA, mlm Viewing Angle˚ Luminous Intensity @ 30mA IV (mcd) Min. Typ. Max. DWW-YJG-W2X-5K8L White 120 3500 - 7125 1400.0 2240.0 2850.0 DWW-YJG-XY1-5K8L White 120 4500 - 8875 1800.0 2850.0 3550.0 Not for new design NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups may also be available upon request. 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 6. An optional Vf bining is also available upon request. Bining scheme is as per following table. 7. Data provided for luminous flux is based on approximation. Electrical Characteristics at Tj=25˚C Part Number DWW -YJG Min. (V) Vf @ If = 30mA Typ. (V) Max. (V) 2.90 3.40 Vr @ Ir = 10uA Min. (V) 5 3.80 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 300 mA Reverse voltage; Ir (max) = 10µA 5 V ESD Threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +110 ˚C 200 mW 300 K/W 180 K/W LED junction temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Characteristics Temperature coefficient of VF (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of Cx (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C Symbol Part Number Value Unit TCV DWW-YJG -3.60 mV / K TCIV DWW-YJG -6.10 mcd / K TCCx DWW-YJG -0.0002 TCCy DWW-YJG -0.0003 Temperature coefficient of Cy (typ) IF = 30mA; 0 ˚C <= T <= 100 ˚C 3 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination DWW-YJG, White Color Grouping Dominant White Bin Structure 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 • • 0.28 0.26 0.24 0.27 0.28 0.29 5L • • 6L • 5K 0.30 6K • 0.31 0.32 • • • 0.33 7L • 7K 0.34 • • 8L • • • • 8K 0.35 0.36 0.37 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin 5K 5L 6K 6L 7K 7L 8K 8L Cx 0.296 0.291 0.310 0.313 Cy 0.259 0.268 0.297 0.284 0.310 Cx 0.291 0.285 0.307 Cy 0.268 0.279 0.312 0.297 0.330 Cx 0.313 0.310 0.330 Cy 0.284 0.297 0.330 0.310 0.330 Cx 0.310 0.307 0.330 Cy 0.297 0.312 0.347 0.330 Cx 0.330 0.330 0.338 0.352 Cy 0.310 0.330 0.342 0.344 Cx 0.330 0.330 0.347 0.345 Cy 0.330 0.347 0.371 0.352 Cx 0.352 0.338 0.364 0.360 Cy 0.344 0.342 0.380 0.357 Cx 0.345 0.347 0.367 0.364 Cy 0.352 0.371 0.401 0.380 Dominant color coordinate is measured with an accuracy of ± 0.01. 4 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0...1800.0 X1 1800.0...2240.0 X2 2240.0...2850.0 Y1 2850.0...3550.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf @ If = 30mA Forward Voltage (V) 34 2.90 ... 3.20 35 3.20 ... 3.50 36 3.50 ... 3.80 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing to incorporate special part number to incorporate Vf binning. 5 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Forward Current Vs Forward Voltage 60 2.5 Forward Current, mA 2 1.5 1 0.5 0 20 40 40 30 20 10 60 80 100 2.5 3 3.5 4 4.5 Forward Current, mA Forward Voltage, V Maximum Forward Current Vs Temperature Relative Intensity Vs Wavelength 55 1 Temp. Solder Point, Ts 50 Forward Current, mA 50 0 0 0.9 45 0.8 Relative Intensity Relative Intensity; Normalized at 30mA Relative Intensity Vs Forward Current 40 35 Temp. Ambient, Ta 30 25 20 15 0.7 0.6 0.5 0.4 0.3 10 0.2 5 0.1 0 0 0 10 20 30 40 50 60 70 80 90 100 110 350 450 550 650 750 Wavelength, nm Temperature Radiation Pattern 30° 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 70° 0.2 80° 90° 0 6 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Power DomiLED • InGaN White : DWW-YJG(5K8L) Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 7 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Recommended Solder Pad 8 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 9 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Packaging Specification 10 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 11 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 17/12/2012 V5.0 DOMINANT TM InGaN White : DWW-YJG(5K8L) Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 09 Apr 2008 2 Add new partno: DWW-YJG-XY1-5K8L 09 Oct 2009 - Update Company Name 15 Mar 2010 2 Not for new design-->DWW-YJG-W2X-5K8L 05 Apr 2010 2 Not for new design-->DWW-YJG-XY1-5K8L 17 Dec 2012 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 14 17/12/2012 V5.0 DOMINANT TM Opto Technologies InGaN White : DWW-YJG(5K8L) Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies (Shanghai) Co., Ltd Rm 305, Hongwell International Plaza No. 1600 Zhong Shan(W) Rd, Xuhui District, 200235 Shanghai, China Tel: +86 21 5403 5655, Fax: +86 21 5403 6055 E-mail: [email protected] DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. #211, Suntech City, 513-15, Sangdaewon 1-Dong, Jungwon-Gu, Seongnam-Si, Gyeonggi-Do, 462-725 Korea. Tel: +82-31-701-5203 Fax: +82-31-701-5204 E-mail: [email protected] DOMINANT Europe Sales Office DOMINANT Semiconductors Europe GmbH Raiffeisenstr. 38, 74906 Bad Rappenau Germany Tel: +49 (0) 7264-89010-0 Fax: +49 (0) 7264-89010-29 E-mail: [email protected] DOMINANT U.S.A Sales Office 25 Rockaway Road, 08833 Lebanon, New Jersey, USA Tel: +1(908) 439-9930 Cell: +1(908) 343-5810 Fax: +1(908) 439-9929 E-mail: [email protected] DOMINANT India Sales Office C-11, Vesanth Business Centre, #86, TTK Road, Alwarpet Chennai - 600 018, India. Tel: +91-44-42030616 / 516 Fax: +91-44-4920616 Cell: +91-9444 920 537 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM