DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: Right Angle DomiLEDTM AlInGaP : DSx-xSS Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015. DomiLED TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > > > > > High brightness surface mount LED. Designed for sideway illumination. 120° viewing angle. Small package outline. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Display: full color display video notice board. > Industry: white goods (eg: Oven, microwave, etc.). © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. DSS-SSS-PQ2-1 Super red, 632nm 120 45.0 71.5 112.5 DSS-CSS-PQ2-1 Super red, 632nm 120 45.0 71.5 112.5 DSR-CSS-PQ2-1 Red, 625nm 120 45.0 71.5 112.5 DSR-CSS-QR2-1 Red, 625nm 120 71.5 112.5 180.0 DSR-CSS-RS2-1 Red, 625nm 120 112.5 180.0 285.0 DSR-CSS-ST2-1 Red, 625nm 120 180.0 285.0 450.0 DSR-SSS-QR2-1 Red, 625nm 120 71.5 112.5 180.0 DSR-TSS-ST2-1 Red, 625nm 120 180.0 285.0 450.0 DSA-CSS-QR2-1 Amber, 615nm 120 71.5 112.5 180.0 DSA-SSS-RS2-1 Amber, 615nm 120 112.5 180.0 285.0 DSA-CSS-RS2-1 Amber, 615nm 120 112.5 180.0 285.0 DSO-CSS-QR2-1 Orange, 605nm 120 71.5 112.5 180.0 DSO-SSS-RS2-1 Orange, 605nm 120 112.5 180.0 285.0 DSO-CSS-RS2-1 Orange, 605nm 120 112.5 180.0 285.0 DSY-CSS-QR2-1 Yellow, 587nm 120 71.5 112.5 180.0 DSY-CSS-RS2-1 Yellow, 587nm 120 112.5 180.0 285.0 DSY-SSS-RS2-1 Yellow, 587nm 120 112.5 180.0 285.0 DSG-SSS-PQ2-1 Green, 570nm 120 45.0 71.5 112.5 DSG-CSS-PQ2-1 Green, 570nm 120 45.0 71.5 112.5 DSG-CSS-QR2-1 Green, 570nm 120 71.5 112.5 180.0 DSP-SSS-LM2-1 Pure Green, 560nm 120 11.2 18.0 28.5 Not for new design NOTE 1. All part number above comes in a quantity of 2500 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table. Please contact marketing for special part number 2 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Part Number Vr @ Ir = 10uA Min. (V) Typ. (V) 1.6 1.9 2.3 12 1.6 1.8 2.3 12 1.6 2.1 2.6 12 DSR-CSS, DSA-CSS, DSS-CSS, DSG-CSS DSO-CSS, DSY-CSS DSS-SSS, DSR-SSS, DSA-SSS, DSO-SSS, DSY-SSS, DSG-SSS, DSP-SSS DSR-TSS Max. (V) Min. (V) Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 20 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.005) 200 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 50 mW 630 K/W 350 K/W LED junction temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 5 mm2 per pad) 3 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Characteristics Symbol Temperature coefficient of dom (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C TC Part Number dom (typ) TCV TCIV 4 Value DSS-CSS 0.01 DSR-CSS 0.03 DSA-CSS 0.05 DSO-CSS 0.04 DSY-CSS 0.09 DSG-CSS 0.10 DSR-TSS 0.02 DSP-SSS 0.10 DSS-CSS -2.3 DSR-CSS -4.3 DSA-CSS -3.2 DSO-CSS -1.6 DSY-CSS -3.3 DSG-CSS -0.2 DSR-TSS -2.0 DSP-SSS -0.2 DSS-CSS -0.52 DSR-CSS -0.59 DSA-CSS -0.60 DSO-CSS -0.62 DSY-CSS -1.05 DSG-CSS -1.20 DSR-TSS -0.62 DSP-SSS -1.17 Unit nm / K mV / K %/K 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) DSS; Super red Full 625 - 640 DSR-CS, -SS; Red (AS) Full 620 - 630 DSR-TS; Red (TS) Full 620 - 635 DSA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DSO; Orange DSY; Yellow DSG; Green DSP; Pure Green Full 564.5 - 576.5 W 564.5 - 567.5 X 567.5 - 570.5 Y 570.5 - 573.5 Z 573.5 - 576.5 Full 552.5 - 564.5 W 552.5 - 555.5 X 555.5 - 558.5 Y 558.5 - 561.5 Z 561.5 - 564.5 Dominant wavelength is measured with an accuracy of ± 1 nm. 5 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group L1 11.2...14.0 L2 14.0...18.0 M1 18.0...22.4 M2 22.4...28.5 P1 45.0...56.0 P2 56.0...71.5 Q1 71.5...90.0 Q2 90.0...112.5 R1 112.5...140.0 R2 140.0...180.0 S1 180.0...224.0 S2 224.0...285.0 T1 285.0...355.0 T2 355.0...450.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) at Tj=25˚C Vf Bin @ 20mA Forward Voltage (V) V01 1.55 … 1.85 V02 1.85 … 2.15 V03 2.15 … 2.45 V04 2.45 … 2.75 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 6 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Forward Current Vs Forward Voltage Forward Current Vs Forward Voltage 2.22.4 50 35 2 1.8 1.6 1.4 1.2 1 2 Forward Current, mA mA Forward Current, Relative Intensity; Normalized at 20mA Relative Intensity; Normalized Relative Intensity at 20mA RelativeLuminous LuminousIntensity IntensityVs Vs Forward Forward Current Current Relative 1.6 1.2 0.80.8 0.6 0.40.4 0.2 0 0 40 30 25 30 TS AlInGaP 20 15 10 10 5 0 0 0 10 10 20 20 30 30 40 4050 AS AlInGaP 20 50 60 0 1 2 2.5 1.2 ForwardCurrent, Current,mA mA Forward 1.4 3 1.6 1.8 3.5 2 2.2 4 2.4 Forward Voltage, V Forward Voltage, V Maximum Current Vs Ambient Temperature Maximum Current Vs Temperature Relative Intensity Vs. Wavelength Relative Intensity Vs Wavelength 25 25 1 1 0.9 0.9 15 15 10 5 10 0 5 0.7 0.7 0.6 0.6 102020 30 4040 50 60 60 70 Orange Yellow Green Red 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 Super Red 0.1 0.1 0 0 0 Amber Pure Green 0.8 0.8 20 Relative Intensity Relative Intensity Forward Current, mA Forward Current, If 20 80 90 100 100 0 400 500 450 AmbientTemperature temperature Ambient 500550 550 600 600650 700 650 750 800 700 750 Wavelength, nm Wavelength; nm Allowable Allowable Forward Current VsCurrent Duty ratio Deg C, tp<10us) Forward Vs (Ta=25 Duty Ratio Radiation Pattern 30° 1000 Allowable Forward Current (mA) 2.6 20° 10° 0° 1.0 40° 0.8 100 10 50° 0.6 60° 0.4 70° 0.2 80° 1 1 10 90° 100 0 0 Duty Ratio,Duty (%); Ratio, Ta=25% C, tp<10us 7 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination DomiLED • AllnGaP : DSx-xSS Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 8 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Recommended Solder Pad 9 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2500 units. • Reel diameter is 180 mm. 10 16/12/2014 V23.0 DOMINANT DOMINANT Opto Technologies TM AllnGaP : DDx-xRS AllnGaP : DSx-xSS TM Innovating Illumination Opto Technologies Innovating Illumination Packaging Specification Packaging Specification 10 11 28/10/2010 V8.0 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Right Angle DomiLED 1 completed bag (2500pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Right Angle DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 37,500 MAX Large 416 x 516 x 476 1.74 96 reels MAX 240,000 MAX 12 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 13 16/12/2014 V23.0 DOMINANT TM AllnGaP : DSx-xSS Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification 7 Add Allowable Forward Current Vs Duty Ratio Graph 17 Apr 2009 3 Add minimum value for electrical characteristics 12 May 2009 2 Not for new design: DSR-CSS-QR2-1 29 Jan 2010 - Update company name 08 Mar 2010 2 Not for new design: DSY-CSS-QR2-1 29 Sep 2010 7 Update Graph: Relative Luminous Intensity Vs Forward Current 29 Dec 2011 11 Error in carrier tape Not for new design: DSO-CSS-QR2-1 25 Jun 2012 2 Typo error in Luminous Intensity 13 Mar 2013 4 Add Characteristics Add Thermal Resistance 07 May 2013 2 Add new partno: DSG-CSS-QR2-1 12 Nov 2013 2, 6 Add new partno: DSR-CSS-ST2-1 Update Vf bin naming 16 Dec 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 14 16/12/2014 V23.0 DOMINANT TM Opto Technologies AllnGaP : DSx-xSS Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM