DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM AlInGaP : DDx-PJS TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > High brightness surface mount LED. 120° viewing angle. > > > > Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > > > > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) Signage: full color display video notice board, signage, special effect lighting Lighting: channel light © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 21/02/2014 V5.0 DOMINANT TM Opto Technologies AllnGaP : DDx-PJS Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Luminous Intensity @ 20mA IV (mcd) Min. Typ. Max. Viewing Angle˚ DDS-PJS-U2V-1 Super Red, 632nm 120 560.0 843.0 1125.0 DDR-PJS-VW1-1 Red, 622 nm 120 715.0 1058.0 1400.0 DDA-PJS-V2W-1 Amber, 615 nm 120 900.0 1350.0 1800.0 DDY-PJS-V2W-1 Yellow, 590 nm 120 900.0 1350.0 1800.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table. Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Part Number Min. (V) DDx-PJS 1.8 Vr @ Ir = 10uA Typ. (V) Max. (V) 2.1 2.6 12 Min. (V) Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit 50 mA 100 mA Reverse voltage; Ir (max) = 10µA 12 V ESD threshold (HBM) 2 kV 120 ˚C Operating temperature -40 … +115 ˚C Storage temperature -40 … +125 ˚C 130 mW - Junction / ambient, Rth JA 360 K/W - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 150 K/W DC forward current Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10) LED junction temperature Power dissipation (at room temperature) Thermal resistance 2 21/02/2014 V5.0 DOMINANT TM AllnGaP : DDx-PJS Opto Technologies Innovating Illumination Characteristics Symbol Temperature coefficient of O dom (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C TC O dom (typ) TCV TCIV Part Number Value Unit DDS-PJS 0.04 nm / K DDR-PJS 0.05 DDA-PJS DDY-PJS 0.06 DDS-PJS -2.2 DDR-PJS -2.2 DDA-PJS -2.0 DDY-PJS -1.9 DDS-PJS -0.4 DDR-PJS -0.5 DDA-PJS -0.7 DDY-PJS -0.9 0.08 mV / K %/K Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) DDS; Super Red Full 625 - 640 DDR; Red Full 620 - 630 DDA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DDY; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm. 3 21/02/2014 V5.0 DOMINANT TM AllnGaP : DDx-PJS Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group U2 560.0...715.0 V1 715.0...900.0 V2 900.0...1125.0 W1 1125.0...1400.0 W2 1400.0...1800.0 Vf Bining (Optional) Vf @ If = 20mA V1 1.80 ... 1.95 V2 1.95 ... 2.10 V3 2.10 ... 2.25 V4 2.25 ... 2.40 V5 2.40 ... 2.55 V6 2.55 ... 2.70 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing to incorporate special part number to incorporate Vf binning. 4 21/02/2014 V5.0 DOMINANT Opto Technologies s Innovating Illumination TM AllnGaP : DDx-PJS PRELIMINARY UNDER DEVELOPMENT Forward Current vs Forward Voltage Relative Intensity Vs Forward Current Relative Intensity; Normalized at 20mA Relative Intensity; Normalized at 50mA Relative Intensity; Normalized at 2mA Vs Forward Current 1.2Relative t verified. The specifications are RelativeIntensity Intensity Vssubject Forwardto Current e without notice. 3 16 602.8 30 Forward Current; mA Forward current vs. forward voltage. 50 Forward Voltage, V Forward Current, mA 2.5 0.85 2 4 0.6 1.5 3 0.4 1 Forward Voltage Forward CurrentVs VsForward ForwardCurrent Voltage 70 2 0.2 0.5 25 402.4 20 30 20 15 2 10 10 1 5 0 0 0 00 0 0 10 20 30 10 20 2 4 40 30 50 6 60 40 Forward Current, mA Forward ForwardCurrent; Current;mA mA 100 70 50 8 1.6 0 1.7 80 60 10 1.4 1.9 20 30 1.6 2 2.1 2.2 40 50 60 1.8 2 Forward Voltage; V 70 2.2 2.3 80 2.4 Relative Intensity Vs Wavelength Variables FCurrentTS 70 5050 20 60 4040 50 15 3030 40 10 20 20 30 20 5 10 10 10 00 11 1 1 Yellow 0.9 0.90.9 0.9 0.8 0.80.8 0.8 20 30 40 100100 120 20 40 50 6060 7080 80 90 20 40 60 80 100 10 20 30 40 50 60 70 80 90 100 0.7 0.7 0.7 0.7 0.6 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.1 0 0 0 Supe Amber Amber Red Red Ambe Super Red Red 500 500 Ambient Temperature FCurrentAS Ambient Temperature Ambient Temperature Variable Yellow 0 450500 0 0 0 10 0 10 Relative Vs Multiple Plot RelativeIntensity IntensityX-Y VsWavelength Wavelength Relative Intensity Forward Current;mA mA Forward ForwardCurrent, Current, mA 60 80 60 25 0 1.8 Forward Current, mA Forward Voltage; V Maximum Current Vs temperature. Ambient Temperature Forward Current Vs Temperature Maximum current vs. Multiple X-Y Plot Forward Current VsAmbient Ambient Temperature 0 0 1.2 550 550 550 550 600 650 650 700 600 650 700 750750 600 650 700 Wavelength; nm Wavelength; Wavelengthnm 750 850 800 750 Wavelength; nm Radiation Pattern Maximum Pulse Vs Duty Cycle 30° 20° 10°Current 0° 1.0 Maximum Pulse Current; mA 1000 40° 100 0.8 50° 0.6 60° 0.4 70° 0.2 80° 10 0 90° 1 10 Duty (%); Tp<=10us 100 5 21/02/2014 V5.0 Yellow DOMINANT TM AllnGaP : DDx-PJS Opto Technologies Innovating Illumination DomiLED • AllnGaP : DDx-PJS Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 6 21/02/2014 V5.0 DOMINANT TM AllnGaP : DDx-PJS Opto Technologies Innovating Illumination Recommended Solder Pad 7 21/02/2014 V5.0 DOMINANT TM AllnGaP : DDx-PJS Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 21/02/2014 V5.0 DOMINANT TM AllnGaP : DDx-PJS Opto Technologies Innovating Illumination Packaging Specification 9 21/02/2014 V5.0 DOMINANT TM AllnGaP : DDx-PJS Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 21/02/2014 V5.0 DOMINANT TM Opto Technologies AllnGaP : DDx-PJS Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 21/02/2014 V5.0 DOMINANT TM AllnGaP : DDx-PJS Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 11 Mar 2011 2, 3 Add Thermal Resistance Data & Characteristics 02 Nov 2011 2 Update Absolute Maximum Ratings: ESD threshold (HBM) Add new partno: DDS-PJS-U2V-1 05 Jan 2012 2 Update Operating Temperature and Storage Temperature 04 Dec 2012 4 Add Vf Binning 21 Feb 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 21/02/2014 V5.0 DOMINANT TM Opto Technologies AllnGaP : DDx-PJS Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM