GaAs MULTI-CHIP MODULE MC-7896 D 1 GHz CATV 27 dB POWER DOUBLER AMPLIFIER DESCRIPTION UE The MC-7896 is a GaAs Multi-chip Module designed for use in CATV applications up to 1 GHz. This unit has low distortion, low noise figure and return loss across the entire frequency band. Reliability and performance uniformity are assured by our stringent quality and control procedures. FEATURES • Low distortion • High linear gain GL = 27.0 dB MIN. @ f = 1 GHz O NT IN • Low return loss ORDERING INFORMATION Part Number MC-7896 Order Number MC-7896-AZ Package 7-pin special with heatsink (Pb-Free) Supplying Form 25 pcs MAX./Tray Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: MC-7896-AZ ABSOLUTE MAXIMUM RATINGS (T A = +25C, unless otherwise specified) Parameter Symbol Ratings Unit VDD 30 V Vi 65.0 dBmV Operating Case Temperature TC 30 to +100 C Storage Temperature Tstg 40 to +100 C Supply Voltage Note SC Input Voltage DI Note In case of single tone Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge Document No. PG10674EJ01V0DS (1st edition) Date Published July 2007 NS MC-7896 RECOMMENDED OPERATING CONDITIONS (Z S = ZL = 75 , unless otherwise specified) Parameter Supply Voltage Symbol Test Conditions VDD Input Voltage Vi 77 channel, MIN. TYP. MAX. Unit 23.5 24.0 24.5 V 25.0 31.0 dBmV Operating Case Temperature 30 TC D 7 dB tilted across the band +25 +85 C Parameter Symbol Test Conditions Linear Gain 1 G L1 f = 40 MHz Linear Gain 2 G L2 f = 1 GHz Gain Slope GSlope Noise Figure 1 Noise Figure 2 Operating Current Composite Triple Beat Cross Modulation GFlatness f = 40 MHz to 1 GHz f = 40 MHz to 1 GHz, Peak to valley MIN. TYP. MAX. Unit 25.6 26.8 dB 27.0 28.0 dB 0.6 2.0 dB 0.8 dB O NT IN Gain Flatness UE ELECTRICAL CHARACTERISTICS (T C = 305C, VDD = 24 V, ZS = ZL = 75 , unless otherwise specified) NF1 f = 50 MHz 5.0 dB NF2 f = 1 GHz 5.5 dB RF OFF 385 mA 77 channel, 63 dBc VO = 52 dBmV at 547.25 MHz, 60 dBc IDD CTB XM Composite 2nd Order Beat CSO 7 dB tilted across the band 65 dBc Input Return Loss 1 RLi1 f = 40 MHz 20 dB RLi2 f = 1 GHz 14 dB RLo1 f = 40 MHz 21 dB RLo2 f = 1 GHz 16 dB Input Return Loss 2 Output Return Loss 1 DI SC Output Return Loss 2 2 Data Sheet PG10674EJ01V0DS MC-7896 PACKAGE DIMENSIONS O NT IN UE D 7-PIN SPECIAL WITH HEATSINK (UNIT: mm) DI SC PIN CONNECTION Data Sheet PG10674EJ01V0DS 3 MC-7896 NOTES ON CORRECT USE (1) The space between PC board and root of the lead should be kept more than 1 mm to prevent undesired stress to the lead and also should be kept less than 4 mm to prevent undesired parasitic inductance. Recommended that space is 2.0 to 3.0 mm typical. (2) Recommended torque strength of the screw is 59 to 78 Ncm. D (3) Form the ground pattern as wide as possible to minimize ground impedance. (to prevent undesired oscillation) All the ground pins must be connected together with wide ground pattern to decrease impedance difference. UE RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Recommended Condition Symbol Note Peak temperature (pin temperature) : 350C or below Soldering time (per pin of device) : 3 seconds or less O NT IN Partial Heating Soldering Conditions DI SC Note The point of pin part heating must be kept more than 1.2 mm distance from the root of lead. 4 Data Sheet PG10674EJ01V0DS MC-7896 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. D 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. DI SC O NT IN UE • Do not lick the product or in any way allow it to enter the mouth. Data Sheet PG10674EJ01V0DS 5