Surge arresters 2-electrode arresters Series/Type: Ordering code: EHV6* series Version/Date: Issue 10 / 2014-01-30 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 (header 1 + top left bar): Surge arresters Identification/Classification 2 (header 2 + bottom left header bar): 2-electrode arresters Ordering code: (top right header bar) Series/Type: (bottom right header bar) EHV6* series Preliminary data (optional): (if EPCOS necessary) AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent isPPD prohibited. Department: AB PD / PPD AB PM Version / Date: EPCOS AG is a TDK Group Company. Issue 10 / 2014-01-30 Surge arresters 2-electrode arresters EHV6* series Product description The EHV6* series was specially designed to meet the strictest protection requirements. An optimized design features a high level of protection against fast rising transients usually caused by lightning disturbance. For use in high-frequency applications the series offers ultra-low capacitance and shows only marginal signal losses up to high frequencies. The devices are extremely reliable and are able to withstand high surge currents without destruction. All tubes are produced to ISO TS 16949 standard together with products that have been in use in automotive applications for almost 20 years. The arresters are tested by automotive standards like IEC 60068 and can sustain high humidity environments and heavy vibration while maintaining full operability at all times. They can withstand high AC voltages without ignition. The EPCOS EHV series is fully UL graded and can be delivered for many different voltage levels as well as in different wire configurations. Features Built to automotive standard (ISO TS 16949) Small sizes Fast response time High current handling capability Stable performance over service life Low capacitance and insertion loss High insulation resistance RoHS-compatible Applications Automotive: On-board battery chargers Vehicle charging stations Others: LED lighting Power supplies Photovoltaic Antenna protection Air-conditioning Product characteristics Physical dimensions without lead wires (diameter × length) Weight Operating temperature Recommended storage - temperature - humidity - period Ø 0.24 × 0.28 in Ø 6.0 × 7.0 mm ~ 0.8 g -40 ... +125 °C +5 … +35 45 … 80 2 °C % years 1) Climatic category (IEC 60068-1) 40/ 125/ 21 Moisture sensitivity level 2) 1 Marking, blue positive XXXX YY XXXX YY Certifications = Nominal voltage = Year of production UL 1449 (E319264) Notes: 1) Specified in terms of corrosion against Sn-plating 2) Tests according JEDEC J-STD-020 PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 10 / 2014-01-30 Page 2 of 10 Surge arresters 2-electrode arresters EHV6* series Electrical specifications Type Nominal DC spark-over voltage 3) 4) Tolerance Minimum Maximum Impulse spark-over voltage @ 100 V/µs for 99% of values typical values @ 1 kV/µs for 99% of values typical values @ 5 kV/µs for 99% of values typical values EHV6*H25.. EHV6*H30.. EHV6*H36.. EHV6*H40.. EHV6*H45.. Unit 2500 3000 3600 4000 4500 V 2000 3000 2400 3600 ±20 2880 4320 3200 4800 3600 5400 % V V < 3300 < 3000 < 3800 < 3400 < 4350 < 4150 < 5000 < 4600 < 5200 < 4800 V V < 3400 < 3100 < 4000 < 3500 < 4500 < 4300 < 5400 < 4800 < 5500 < 5000 V V < 3900 < 3400 < 4500 < 4000 < 5000 < 4500 < 5600 < 5000 < 6000 < 5500 V V Service life 300 operations 8/20 µs 3 operations 8/20 µs 1 operation 8/20 µs 100 3 5 A kA kA Insulation resistance @ 100 VDC >1 G Capacitance <1 pF Arc voltage @ 1 A ~ 45 ~ 45 ~ 45 ~ 50 ~ 50 V Glow to arc transition current < 0.3 < 0.3 < 0.3 < 0.3 ~ 0.3 A ~ 240 ~ 240 ~ 240 ~ 250 ~ 250 V 1250 1500 1800 2000 2250 V Glow voltage @ 0.1 A AC withstand voltage (1 min) 5) Notes: 3) At delivery AQL 0.65 level II, DIN ISO 2859 4) In ionized mode 5) AC withstand voltage still valid after service life Terms and current waveforms in accordance with: ITU-T Rec. K. 12; IEC 61643-21; 61643-311; IEC 61663-2. PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 10 / 2014-01-30 Page 3 of 10 Surge arresters 2-electrode arresters EHV6* series Explanation of type: 1 2 3 4 5 6 7 8 9 10 11 E H V 6 2 - H 3 6 B 2 High voltage Product code 1 2 3 DC spark-over voltage e.g. 36 = 36 × 10² V = 3600 V Ø wire 1.0 mm 0.8 mm 0.6 mm Bending style blank straight wires B… bended for tray T… bended for tape Explanation of ordering code: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 B 8 8 0 6 9 X 1 6 8 3 S 1 0 2 Product group: Surge arresters Type code Packing S T B C Stripes Tape Blister tray Bulk PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Packing unit Code 101 102 103 202 203 251 Pieces 10 100 1000 200 2000 25 Code 252 253 352 403 502 902 Pieces 250 2500 350 4000 500 900 Issue 10 / 2014-01-30 Page 4 of 10 Surge arresters 2-electrode arresters EHV6* series Dimensions in mm and wire configurations EHV6*-H... Type Ordering code EHV62-H25 EHV63-H25 EHV63-H30 EHV62-H36 EHV63-H36 EHV62-H40 EHV63-H40 EHV62-H45 EHV63-H45 B88069X1893S102 / B88069X1893T502 B88069X2733S102 / B88069X2733T502 B88069X2553S102 / B88069X2553T502 B88069X1683S102 / B88069X1683T502 B88069X3003S102 / B88069X3003T502 B88069X2103S102 / B88069X2103T502 B88069X2563S102 / B88069X2563T502 B88069X1793S102 / B88069X1793T502 B88069X2573S102 / B88069X2573T502 EHV6*-H...B1 Type Ordering code EHV62-H36B1 B88069X2213B502 Type Ordering code EHV63-H25B2 EHV63-H30B2 EHV62-H36B2 EHV63-H36B2 EHV63-H40B2 EHV63-H45B2 B88069X2023B502 B88069X2043B502 B88069X1693B502 B88069X2073B502 B88069X2633B502 B88069X2643B502 EHV6*-H...B2 PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 10 / 2014-01-30 Page 5 of 10 Surge arresters 2-electrode arresters EHV6* series EHV6*-H.. B7 Type Ordering code EHV63-H30B7 B88069X2053B252 EHV63-H36B7 B88069X2083B252 EHV6*-H.. T7 Type Ordering code EHV63-H25T7 B88069X2033A802 EHV63-H30T7 B88069X2063A802 EHV63-H36T7 B88069X2093A802 EHV63-H45T7 B88069X2953A802 PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 10 / 2014-01-30 Page 6 of 10 Surge arresters 2-electrode arresters EHV6* series Packing advices B88069X….S102 = 100 pcs. on 5 taped stripes B88069X….T502 = 500 pcs. on tape and reel B88069X....B502 = 500 pcs. on trays B88069X….B252 = 250 pcs. on trays PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 10 / 2014-01-30 Page 7 of 10 Surge arresters 2-electrode arresters EHV6* series B88069X….A802 = 800 pcs. in ammo pack Soldering parameter Wave soldering Wave profile feature Pb-free assembly Solder Sn 95.5 / Ag 3.8 / Cu 0.7 Solder bath temperature 263 (±3) °C Dwell time <3s Soldering profile applied to a single soldering process. PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 10 / 2014-01-30 Page 8 of 10 Surge arresters 2-electrode arresters EHV6* series Cautions and warnings Do not operate surge arresters in power supply networks, whose maximum operating voltage exceeds the minimum spark-over voltage of the surge arresters. Surge arresters may become hot in the event of longer periods of current stress (burn risk). In the event of overload the connectors may fail or the component may be destroyed. If the contacts of the surge arresters are defective, current load can cause sparks and loud noises. Surge arresters must be handled with care and must not be dropped. Do not continue to use damaged surge arresters. Display of ordering codes for EPCOS products The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 10 / 2014-01-30 Page 9 of 10 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PQSine, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 10 of 10