SAW Components

SAW Components
SAW Duplexer
WCDMA / LTE Band 18
Series/type:
Ordering code:
B8573
B39861B8573P810
Date:
Version:
June 08, 2014
2.1
© EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Application
■ Low-loss SAW duplexer for mobile telephone
WCDMA / LTE Band 18 system
Low insertion attenuation
Low amplitude ripple
Usable passband 15MHz
Single ended to balanced transformation
in Antenna-Rx path
■ Impedance transformation 50ohm to 100ohm
in Antenna - Rx path
■
■
■
■
0.43
0.33
1
2
3
4
7
5
0.7
side view
2.0
6
5
4
8
7
1.6
6
bottom view
0.29
8
9
0.29
Package size 2.0 x 1.6 mm2
Max. height 0.47 mm
RoHS compatible
Approximate weight 0.006g
Package for Surface Mount Technology (SMT)
Ni terminals, Au-plated
Electrostatic Sensitive Device (ESD)
Moisture Sensitive Level (MSL) 3
0.47 max.
■
■
■
■
■
■
■
■
0.35
Features
1
2
top view
3
Pin configuration
■
■
■
■
1, 8
3
6
2, 4, 5, 7, 9
3
1
RX Output (balanced)
TX Input
Antenna
To be grounded
8
4,5,9
2,7
6
Please read cautions and warnings and
important notes at the end of this document.
2
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω II 10.0nH
ZRX = 100 Ω (Balanced)
ZTX =
50 Ω
Characteristics TX - ANT
min.
Center frequency
fC
Maximum insertion attenuation
815
... 830
Amplitude ripple(p-p)
815
...
815
...
—
MHz
—
1.3
2.0
dB
—
0.5
1.0
dB
—
0.4
1.0
dB
αmax
MHz
∆α
830
MHz
830
MHz
Over any 10MHz Inband
Error Vector Magnitude
@fCarrier 817.4 ...
max.
—
typ.
@ 25 ˚C
822.5
MHz EVM1)
MHz EVM2)
—
2.0
4.0
%
827.6
—
2.2
4.0
%
830
MHz
—
1.4
2.0
dB
Output VSWR (ANT port)
815
... 830
MHz
—
1.3
2.0
dB
@fCarrier 817.4
...
Input VSWR (TX port)
815
...
1)
2)
827.6
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Room temperature
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Over range of temperatuere
Please read cautions and warnings and
important notes at the end of this document.
3
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω II 10.0nH
ZRX = 100 Ω (Balanced)
ZTX =
50 Ω
Characteristics TX - ANT
Please read cautions and warnings and
important notes at the end of this document.
typ.
@ 25 ˚C
max.
30
10
44
30
30
40
45
40
45
25
30
30
30
25
20
20
20
18
39
42
55
47
52
49
50
49
49
45
41
39
36
31
30
28
28
25
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
α
Attenuation
10
...
764
764
...
804
860
... 875
875
... 890
1476
... 1501
1565.42 ... 1573.374
1573.374 ... 1577.466
1577.466 ... 1585.42
1597.5515 ... 1605.886
1630
... 1660
1844.9
... 1879.9
1884.5
... 1919.6
2110
... 2170
2400
... 2557
3260
..3320
4075
... 4150
4890
... 4980
5705
... 5810
min.
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
4
July 8, 2014
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω II 10.0nH
ZRX = 100 Ω (Balanced)
ZTX =
50 Ω
Characteristics ANT - RX
min.
Center frequency
fC
Maximum insertion attenuation
860
... 875
max.
—
typ.
@ 25 ˚C
867.5
—
MHz
—
1.8
2.2
dB
dB
αmax
MHz
∆α
Amplitude ripple (p-p)
860
...
875
MHz
—
0.4
1.0
Input VSWR (ANT port)
860
...
875
MHz
—
1.6
2.0
Output VSWR (RX port)
860
...
875
MHz
—
1.7
2.0
Common Mode Rejection Ratio CMRR
860
... 875
MHz
20
25
—
Please read cautions and warnings and
important notes at the end of this document.
5
July 8, 2014
dB
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω II 10.0nH
ZRX = 100 Ω (Balanced)
ZTX =
50 Ω
Characteristics ANT - RX
min.
typ.
@ 25 ˚C
max.
MHz
MHz
MHz
MHz
40
45
38
40
67
61
49
46
—
—
—
—
MHz
MHz
MHz
MHz
—
—
—
—
-129
-107
-105
-117
-109
-97
-95
-107
α
Attenuation
10
815
935
940
... 815
... 830
... 940
... 6000
IMD Product Level Limits1)
at fTX=822.5 MHz, fRX=867.5 MHz
Blocker 1
45.0
Blocker 2
777.5
Blocker 3
1690.0
Blocker 4
2512.5
1)
dB
dB
dB
dB
dBm
dBm
dBm
dBm
IMD product level limits for power levels PTX=21.5dB (antenna port output power) and PBLOCKER=-15dBm (antenna port input power).
Please read cautions and warnings and
important notes at the end of this document.
6
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω II 10.0nH
ZRX = 100 Ω (Balanced)
ZTX =
50 Ω
Characteristics TX - RX
min.
Differential mode isolation
815.0 ... 830
typ.
@ 25 ˚C
max.
α
MHz
55
62
—
dB
875
MHz
50
55
—
dB
1574.0
... 1577
MHz
40
69
—
dB
1630.0
... 1660
MHz
20
69
—
dB
2445.0
... 2490
MHz
20
62
—
dB
50
55
—
dB
860.0
...
Common mode isolation
815.0 ...
α
830
Please read cautions and warnings and
important notes at the end of this document.
MHz
7
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Maximum ratings
Storage temperature range
DC voltage
ESD voltage
Input power at
815.0 ... 830.0 MHz
elsewhere
1)
2)
Tstg
VDC
VESD
PIN
–40/+85
51)
1002)
29
10
˚C
V
V
dBm
dBm
Machine Model
source and load impedance 50 Ω
continuous wave
T = 50˚C, 5000 h
}
168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy
acc. to JESD22-A115B (MM - Machine Model), 10 negative and 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
8
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Frequency Response Tx-ANT (passband)
Frequency Response Tx-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
9
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Frequency Response ANT-Rx (passband)
Frequency Response ANT-Rx (wideband)
Please read cautions and warnings and
important notes at the end of this document.
10
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
Frequency Response Tx-Rx (passband) / Differential Mode
Frequency Response Tx-Rx (wideband) / Differential Mode
Please read cautions and warnings and
important notes at the end of this document.
11
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
requency Response Tx-Rx (passband) / Common Mode
Frequency Response Tx-Rx (wideband) / Common Mode
Please read cautions and warnings and
important notes at the end of this document.
12
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
VSWR S11 Tx - port S22 ANT - port S33 Rx - port
Please read cautions and warnings and
important notes at the end of this document.
13
July 8, 2014
SAW Components
B8573
SAW Duplexer
822.50 / 867.50 MHz
Data sheet
References
Type
B8573
Ordering code
B39861B8573P810
Marking and package
C61157-A8-A40
Packaging
F61074-V8247-Z000
Date codes
L_1126
S-parameters
B8573_NB.s4p, B8573_WB.s4p
see file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2014. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
14
July 8, 2014
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
15
July 8, 2014