SAW Components SAW Duplexer Cellular / WCDMA Band V Series/type: Ordering code: B8553 B39881B8553P810 Date: Version: May 11, 2011 2.0 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Application ■ Multimode SAW duplexer for mobile telephone 0.43 Component size 2.0 x 1.6 mm2 Component height 0.47 mm max. RoHS compatible Package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals ■ Electrostatic Sensitive Device (ESD) ■ Moisture Sensitivity Level (MSL) 3 ■ ■ ■ ■ 3 4 0.29 0.47 max. 7 5 2.0 6 5 4 2 3 8 4,5,9 2,7 6 Please read cautions and warnings and important notes at the end of this document. top view 3 1 TX Input RX Output (balanced) Antenna To be grounded bottom view side view 8 1.6 Pin configuration 6 0.7 1 3 1, 8 6 2, 4, 5, 7, 9 2 9 7 ■ ■ ■ ■ 0.33 1 0.35 Features 0.29 ■ 8 ■ ■ ■ ■ Cellular\WCDMA Band V, Band VI (830-840 MHz) and Band IXX (830-845 MHz) systems Low insertion attenuation Low amplitude ripple High Tx band isolation Single ended to balanced transformation in Antenna - Rx path Impedance transformation 50Ω to 100Ω in Antenna - Rx path 2 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 14 nH ZRX = 100 Ω (balanced) ZTX = 50 Ω Characteristics TX - ANT min. Center frequency fC Maximum insertion attenuation 824.0 ... 849.0 typ. @ 25 ˚C 836.5 max. 1.8 2.3 dB 1.5 2.02) dB 0.9 1.5 dB 0.5 1.22) dB 2.0 3.02) % MHz αmax MHz αWCDMA ∆α 1) MHz αWCDMA 1) 846.6 MHz EVM3) 849.0 MHz 1.9 2.2 Output VSWR (ANT port) 824.0 ... 849.0 MHz 1.7 2.1 @fCarrier 826.4 ... 846.6 MHz Amplitude ripple 824.0 ... 849.0 MHz @fCarrier 826.4 ... 846.6 Error Vector Magnitude @fCarrier 826.4 ... Input VSWR (TX port) 824.0 ... 1) 2) 3) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8). Temperature range for this parameter is -20oC to +85oC. Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 3 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 14 nH ZRX = 100 Ω (balanced) ZTX = 50 Ω Characteristics TX - ANT Absolute attenuation 10.0 ... 420.0 ... 494.0 ... 701.0 ... 728.0 ... 764.0 ... 860.0 ... 869.0 ... 1565.42 ... 1573.374 ... 1577.466 ... 1597.5515 ... 1638.0 ... 1844.9 ... 1884.5 ... 1930.0 ... 2110.0 ... 2400.0 ... 3286.0 ... 4110.0 ... 4934.0 ... 5725.0 ... min. typ. @ 25 ˚C 30 35 30 35 35 30 3 44 35 35 35 35 20 30 29 27 23 23 19 16 10 9 42 39 38 39 40 34 24 50 40 40 40 39 37 34 34 33 31 27 24 19 17 17 max. α 420.0 494.0 701.0 728.0 764.0 804.0 869.0 894.0 1573.374 1577.466 1585.42 1605.886 1708.0 1879.9 1919.6 1990.0 2170.0 2557.0 3406.0 4255.0 5350.0 5953.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Please read cautions and warnings and important notes at the end of this document. 4 May 11, 2011 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 14 nH ZRX = 100 Ω (balanced) ZTX = 50 Ω Characteristics ANT - RX min. Center frequency fC Maximum insertion attenuation 869.0 ... 894.0 @fCarrier 871.4 typ. @ 25 ˚C 881.5 max. 2.0 2.5 dB 1.9 2.22) dB 0.7 1.3 dB 0.6 1.02) dB MHz αmax MHz ... 891.6 MHz Amplitude ripple (p-p) 869.0 ... αWCDMA ∆α 1) αWCDMA 1) 894.0 MHz ... 891.6 MHz Input VSWR (ANT port) 869.0 ... 894.0 MHz 1.8 2.1 Output VSWR (RX port) 869.0 ... 894.0 MHz 2.0 2.3 Common mode rejection ratio 869.0 ... 894.0 MHz @fCarrier 871.4 1) 2) 3) CMRR 233) 373) dB Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8). Temperature range for this parameter is -20oC to +85oC. A combination of 10o phase balance and 1 dB amplitude balance corresponds to 19.6 dB CMRR Please read cautions and warnings and important notes at the end of this document. 5 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 14 nH ZRX = 100 Ω (balanced) ZTX = 50 Ω Characteristics ANT - RX min. typ. @ 25 ˚C max. -137 -114 -92 -120 -106 -109 -88 -109 IMD product level limits1) at fTX = 836.5 MHz fRX = 881.5 MHz Blocker 1 45.0 MHz Blocker 2 791.5 MHz Blocker 3 1718.0 MHz Blocker 4 2554.5 MHz Attenuation 10.0 447.0 824.0 849.0 909.0 1000.0 1850.0 1920.0 1) dBm dBm dBm dBm α ... ... ... ... ... ... ... ... 447.0 824.0 849.0 854.0 1000.0 1850.0 1920.0 6000.0 MHz MHz MHz MHz MHz MHz MHz MHz 45 30 55 10 13 28 40 35 Power levels: 21.5 dBm Tx signal, -15dBm blocker at antenna port. Please read cautions and warnings and important notes at the end of this document. 6 May 11, 2011 83 66 60 60 23 62 62 51 dB dB dB dB dB dB dB dB SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –30 ˚C to +85 ˚C ZANT= 50 Ω ll 14 nH ZRX = 100 Ω (balanced) ZTX = 50 Ω Characteristics TX - RX min. typ. @ 25 ˚C max. 60 67 dB 602) 68 dB 50 54 dB 502) 40 20 20 53 72 71 63 dB dB dB dB 55 552) 60 60 dB dB Isolation 824.0 ... 849.0 MHz @fCarrier 826.4 ... 846.6 MHz 869.0 ... 894.0 MHz @fCarrier 871.4 ... 891.6 MHz 1574.0 ... 1577.0 1638.0 ... 1708.0 2462.0 ... 2557.0 Common Mode Isolation 824.0 ... 849.0 @fCarrier 826.4 ... 846.6 MHz MHz MHz 1) 2) MHz MHz αWCDMA 1) αWCDMA 1) αWCDMA 1) Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8). Temperature range for this parameter is -20oC to +85oC. Please read cautions and warnings and important notes at the end of this document. 7 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Maximum ratings Storage temperature range DC voltage ESD voltage Input power at Tstg VDC VESD PIN –40/+85 5 1001) 824.0 ... 849.0 MHz elsewhere 1) ˚C V V 29 10 machine model, 10 pulses source and load impedance 50 Ω continuous wave T = 55˚C, 1000 h } dBm dBm acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫–∞ Sds 21 ( f )H RRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 5-Passband, fCarrier ranges from 826.4 MHz (lowest Tx channel) to 846.6 MHz (highest Tx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫–∞ H RRC ( f ) Please read cautions and warnings and important notes at the end of this document. 8 2 df = 1 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Frequency Response TX-ANT (Passband) Frequency Response TX-ANT (Wideband) Please read cautions and warnings and important notes at the end of this document. 9 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Frequency Response RX-ANT (Passband) Frequency Response RX-ANT (Wideband) Please read cautions and warnings and important notes at the end of this document. 10 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Frequency Response TX-RX (Passband Differential Mode Isolation) Frequency Response TX-RX (Wideband Differential Mode Isolation) Please read cautions and warnings and important notes at the end of this document. 11 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Frequency Response TX-RX (Passband Common Mode Isolation) Frequency Response TX-RX (Wideband Common Mode Isolation) Please read cautions and warnings and important notes at the end of this document. 12 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet Matching (TX, RX, ANT) Please read cautions and warnings and important notes at the end of this document. 13 May 11, 2011 SAW Components B8553 SAW Duplexer 836.50 / 881.50 MHz Data Sheet References Type B8553 Ordering code B39881B8553P810 Marking and package C61157-A8-A38 Packaging F61074-V8247-Z000 Date codes L_1126 S-parameters B8553_UN_NB.s4p, B8553_UN_WB.s4p; see file header for pin/port assignments; Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 14 May 11, 2011 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 15 May 11, 2011