B39781B8620P810

SAW Components
SAW Duplexer
LTE Band 13
Series/type:
Ordering code:
B8620
B39781B8620P810
Date:
Version:
January 16, 2014
2.1
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Application
■ Low-loss SAW duplexer for mobile telephone
LTE Band 13 system
■ Low insertion attenuation
■ Low amplitude ripple
■ 50Ω single-ended both in Antenna-Rx and
Tx-Antenna paths
0.3
Package size 1.8 x 1.4 mm2
max. Package height 0.475 mm
RoHS compatible
Approx. weight 0.0042g
Package for Surface Mount Technology (SMT)
Ni, Au-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sensitivity Level 3
0.7
1
0.35
2
3
4
8
7
0.475 max.
■
■
■
■
■
■
■
■
6
5
0.25
0.25
Features
bottom view
side view
1.8
1.4
7
■
■
■
■
3
1
6
2, 4, 5, 7,8
5
8
4
1
Pin configuration
6
2
3
1
Tx Input
Rx Output
Antenna
To be grounded
3
7,8
2,4,5
6
Please read cautions and warnings and
important notes at the end of this document.
2
January 16, 2014
top view
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
Rx terminating impedance:
Tx terminating impedance:
T = –30 ˚C to +90 ˚C
ZAnt =
50 Ω || 15 nH
ZRx =
50 Ω
ZTx =
50 Ω
Characteristics Tx-Antenna
min.
max.
—
typ.
@ 25 ˚C
782.0
—
MHz
—
1.7
2.3
dB
—
0.5
1.1
dB
MHz
—
0.6
1.0
dB
MHz EVM1)
MHz EVM2)
—
—
1.8
1.8
4.0
3.0
%
%
MHz
—
1.3
2.0
MHz
—
1.3
2.0
30
40
40
50
33
26
14
6
3
2
8
30
45
45
45
45
45
42
45
48
59
43
43
46
39
27
15
11
43
51
51
52
55
57
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Center frequency
fc
Maximum insertion attenuation
777.0 ... 787.0
Amplitude ripple (p-p)
777.0 ... 787.0
Amplitude ripple over any 5 MHz
channel
777.0 ... 787.0
Error Vector Magnitude
@fCarrier 779.4 ... 784.6
@fCarrier 779.4 ... 784.6
Tx port VSWR
777.0 ... 787.0
Ant port VSWR
777.0 ... 787.0
Attenuation
10.0 ... 716.0
716.0 ... 728.0
728.0 ... 746.0
746.0 ... 756.0
758.0 ... 767.5
767.5 ... 768.0
768.0 ... 769.0
769.0 ... 770.0
770.0 ... 771.0
771.0 ... 772.0
799.0 ... 805.0
869.0 ... 894.0
1554.0 ... 1565.0
1565.0 ... 1585.0
1597.0 ... 1607.0
1805.0 ... 1880.0
1930.0 ... 1990.0
α
MHz
∆α
MHz
∆αch
α
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Please read cautions and warnings and
important notes at the end of this document.
3
January 16, 2014
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Characteristics Tx-Antenna
2111.0
2331.0
2400.0
3108.0
4900.0
1)
2)
...
...
...
...
...
2170.0
2361.0
2484.0
3148.0
5850.0
min.
MHz
MHz
MHz
MHz
MHz
45
40
40
30
9
typ.
@ 25 ˚C
58
58
57
43
11
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
T = +25˚C
Please read cautions and warnings and
important notes at the end of this document.
4
January 16, 2014
max.
—
—
—
—
—
dB
dB
dB
dB
dB
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
Rx terminating impedance:
Tx terminating impedance:
T = –30 ˚C to +90 ˚C
ZAnt =
50 Ω || 15 nH
ZRx =
50 Ω
ZTx =
50 Ω
Characteristics Antenna-Rx
min.
max.
—
typ.
@ 25 ˚C
751.0
—
MHz
—
1.5
2.0
dB
MHz
—
0.3
0.8
dB
Center frequency
fc
Maximum insertion attenuation
746.0 ... 756.0
Amplitude ripple (p-p)
746.0 ... 756.0
α
MHz
∆α
Ant port VSWR
746.0 ...
756.0
MHz
—
1.4
2.0
746.0 ...
756.0
MHz
—
1.4
2.0
10.0 ...
686.0
31.0
728.0
772.0
787.0
1710.0
1755.0
1910.0
2268.0
2500.0
5950.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
40
50
27
27
50
40
40
40
37
40
33
53
96
42
42
60
45
51
49
44
47
37
—
—
—
—
—
—
—
—
—
—
—
at fTx=782.0 MHz, fRx= 751.0 MHz
Blocker 1
31.0
Blocker 2
813.0
Blocker 3
1533.0
Blocker 4
2315.0
MHz
MHz
MHz
MHz
—
—
—
—
-136
-117
-120
-129
-106
-102
-106
-109
Rx port VSWR
α
Attenuation
686.0
771.0
777.0
787.0
1710.0
1850.0
2238.0
2400.0
4900.0
...
...
...
...
...
...
...
...
...
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
IMD product level limits1)
1)
dBm
dBm
dBm
dBm
IMD product level limits for power levels PTX=21.5 dBm (antenna port output power) and
PBlocker=-15dBm (antenna port input power)
Please read cautions and warnings and
important notes at the end of this document.
5
January 16, 2014
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
Rx terminating impedance:
Tx terminating impedance:
T = –30 ˚C to +90 ˚C
ZAnt =
50 Ω || 15 nH
ZRx =
50 Ω
ZTx =
50 Ω
Characteristics Tx-Rx
min.
typ.
@ 25 ˚C
max.
55
55
57
60
30
30
30
57
58
59
63
59
54
52
—
—
—
—
—
—
—
α
Isolation
746.5
749.0
752.0
777.0
1552.0
2328.0
3104.0
... 749.0
... 752.0
... 755.5
... 787.0
... 1574.0
... 2361.0
... 3148.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
dB
dB
dB
dB
dB
dB
dB
Maximum ratings
Storage temperature range
DC voltage
ESD voltage
Input power
Tstg
VDC
VESD
PIN
777.0 ... 787.0 MHz
elsewhere
1)
2)
–40/+85
51)
1002)
28.5
10
˚C
V
V
dBm
dBm
Machine Model
source and load impedance 50 Ω
continuous wave
T = 50˚C, 5000 h
}
168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy
acc. to JESD22-A115B (MM - Machine Model), 10 negative and 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
6
January 16, 2014
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Frequency Response Tx-Ant
Frequency Response Ant-Rx
Please read cautions and warnings and
important notes at the end of this document.
7
January 16, 2014
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Frequency Response Tx-Ant
Frequency Response Tx-Ant (wideband)
Please read cautions and warnings and
important notes at the end of this document.
8
January 16, 2014
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Frequency Response Rx-Ant
Frequency Response Rx-Ant (wideband)
Please read cautions and warnings and
important notes at the end of this document.
9
January 16, 2014
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Frequency Response Tx-Rx
Frequency Response Tx-Rx (wideband)
Please read cautions and warnings and
important notes at the end of this document.
10
January 16, 2014
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
Return Loss
S11 Tx- port
S22 Ant-port
Please read cautions and warnings and
important notes at the end of this document.
11
S33 Rx-port
January 16, 2014
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
References
Type
B8620
Ordering code
B39781B8620P810
Marking and package
C61157-A8-A98
Packaging
F61074-V8259-Z000
Date codes
L_1126
S-parameters
B8620_NB_UN.s3p, B8620_WB_UN.s3p
see file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2014. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
12
January 16, 2014
SAW Components
B8620
SAW Duplexer
782.0 / 751.0 MHz
Data sheet
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
Please read cautions and warnings and
important notes at the end of this document.
13
January 16, 2014