SAW Components SAW Duplexer Automotive telematics Series/type: Ordering code: B4412 B39202B4412P810 Date: Version: November 7, 2014 2.2 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet Application SAW duplexer for LTE Band II systems High out of band Rx-Tx isolation Low amplitude ripple Usable passband 60 MHz 0.43 0.33 1 2 3 4 7 6 5 bottom view 0.29 0.29 9 0.7 0.45 max. Package size 2.0 * 1.6 mm2 Package height max. 0.45 mm RoHS compatible Approx. weight 0.005 g Package for Surface Mount Technology (SMT) Ni terminals, Au-plated AEC-Q200 qualified component family (operable temperature range -40˚C to +85˚C) ■ Electrostatic Sensitive Device (ESD) ■ ■ ■ ■ ■ ■ ■ 0.35 Features 8 ■ ■ ■ ■ side view 2.0 5 4 6 8 1.6 7 1 2 top view 3 Pin configuration ■ ■ ■ ■ ■ 3 1 6 7, 8, 9 2, 4, 5 TX Input RX Output Antenna To be grounded To be grounded 3 1 7,8,9 2,4,5 6 Please read cautions and warnings and important notes at the end of this document. 2 November 7, 2014 SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = –40 ˚C to +85 ˚C ZANT = 50 Ω || 50 nH ZRX = 50 Ω ZTX = 50 Ω || 25 nH Characteristics TX - ANT min. Center frequency fC Maximum insertion attenuation 1850.0 ... 1910.0 MHz Amplitude ripple (p-p) ∆α 1850.0 ... 1910.0 MHz 1) Error Vector Magnitude @fCarrier 1852.4 ... 1907.6MHz EVM 2) Input VSWR (TX port) 1850.0 ... 1910.0 MHz Output VSWR (ANT port) 1850.0 ... 1910.0 MHz Attenuation α 100.0 ... 869.0 MHz 869.0 ... 1559.0 MHz 1559.0 ... 1605.9 MHz 1605.9 ... 1780.0 MHz 1930.0 1990.0 2300.0 2400.0 3600.0 1) 2) ... ... ... ... ... 1990.0 MHz 2300.0 MHz 2400.0 MHz 3600.0 MHz 3830.0 MHz max. — typ. @ 25˚C 1880.0 — MHz — 2.7 6.0 dB — 0.6 3.5 dB — 2.0 6.0 % — 1.7 2.0 — 1.7 2.0 33 34 42 40 36 37 49 47 — — — — dB dB dB dB 43 37 37 35 25 49 40 43 40 33 — — — — — dB dB dB dB dB Over any 5 MHz Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 3 November 7, 2014 SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = –40 ˚C to +85 ˚C ZANT = 50 Ω || 50 nH ZRX = 50 Ω ZTX = 50 Ω || 25 nH Characteristics ANT - RX max. — typ. @ 25˚C 1960.0 — MHz Maximum insertion attenuation 1930.0 ... 1990.0 MHz — 3.3 6.3 dB Amplitude ripple (p-p) ∆α 1930.0 ... 1990.0 MHz 1) — 0.5 3.3 dB Input VSWR (ANT port) 1930.0 ... 1990.0 MHz — 1.8 2.1 Output VSWR (RX port) 1930.0 ... 1990.0 MHz — 1.9 2.2 Center frequency fC α Attenuation 1) min. 100.0 1850.0 ... 1850.0 MHz ... 1910.0 MHz 40 40 44 48 — — dB dB 2005.0 2050.0 2150.0 ... 2050.0 MHz ... 2150.0 MHz ... 3980.0 MHz 3 30 40 5 40 46 — — — dB dB dB min. typ. @ 25˚C max. 44 35 44 48 40 51 — — — Over any 5 MHz Characteristics TX - RX α Isolation 1850.0 1910.0 1930.0 ... 1910.0 MHz ... 1930.0 MHz ... 1990.0 MHz Please read cautions and warnings and important notes at the end of this document. 4 November 7, 2014 dB dB dB SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet Maximum ratings Operable temperature range Storage temperature range DC voltage Input power at 1850.0 ... 1910.0 MHz elsewhere T Tstg VDC PIN Please read cautions and warnings and important notes at the end of this document. –40/+85 –40/+85 0 t.b.d. 16 5 ˚C ˚C V dBm dBm source and load impedance 50 Ω continuous wave T = 50˚C, 5000 h } November 7, 2014 SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet Frequency Response TX-ANT Frequency Response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 6 November 7, 2014 SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet Frequency Response RX-ANT Frequency Response RX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 7 November 7, 2014 SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet Frequency Response TX-RX Please read cautions and warnings and important notes at the end of this document. 8 November 7, 2014 SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet Return Loss S11 TX- port S33 RX-port Please read cautions and warnings and important notes at the end of this document. S22 ANT-port 9 November 7, 2014 SAW Components B4412 SAW Duplexer 1880.0 / 1960.0 MHz Data sheet References Type B4412 Ordering code B39202B4412P810 Marking and package C61157-A8-A152 Packaging F61074-V8247-Z000 Date codes L_1126 S-parameters B4412_NB_UN.s3p, B4412_WB_UN.s3p See file header for port/pin assignment table. Soldering profile S_6001 RoHS compatible RoHS-compatible means that products are compatible with the requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the Council of June 8th, 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("Directive") with due regard to the application of exemptions as per Annex III of the Directive in certain cases. Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2014. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 10 November 7, 2014 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 11 November 7, 2014