SAW Components, B8608

SAW Components
SAW Duplexer
Cellular / WCDMA Band V
Series/type:
Ordering code:
B8608
B39881B8608P810
Date:
Version:
Apr 25, 2013
2.0
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Application
■ Multimode SAW duplexer for mobile telephone
Cellular / WCDMA Band V systems
■ Low insertion attenuation
■ Low amplitude ripple
0.3
Package size 1.8 x 1.4 mm2
Max. package height 0.475 mm
RoHS compatible
Package for Surface Mount Technology (SMT)
Ni, Au-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sensitivity Level 3
0.7
1
0.35
2
3
4
8
7
0.475 max.
■
■
■
■
■
■
■
6
5
0.25
0.25
Features
bottom view
side view
1.8
1.4
7
Pin configuration
3
1
6
2, 4, 5, 7,8
5
8
4
1
■
■
■
■
6
2
3
2,4, 5, 7, 8
TX Input
RX Output
Antenna
To be grounded
1
3
6
Please read cautions and warnings and
important notes at the end of this document.
top view
2
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs TX - ANT
Center frequency
fC
—
typ.
@ 25 ˚C
836.5
Maximum insertion attenuation
824.0 ... 849.0 MHz
@fCarrier 826.4 ... 846.6 MHz
αmax
αWCDMA1)
—
—
1.5
1.3
2.2
2.1
dB
dB
Amplitude ripple (p-p)
824.0 ... 849.0 MHz
@fCarrier 826.4 ... 846.6 MHz
∆α
αWCDMA1)
—
—
0.7
0.4
1.5
1.3
dB
dB
—
0.7
1.0
dB
—
2.7
3.5
%
—
1.6
2.1
—
1.6
2.0
Amplitude ripple over any 5MHz
channel
824.0 ... 849.0 MHz
Error Vector Magnitude
@fCarrier 826.4 ... 846.6 MHz
min.
1)
—
MHz
∆α
EVM2)
Input VSWR (TX port)
824.0 ... 849.0 MHz
Output VSWR (ANT port)
824.0 ... 849.0 MHz
2)
max.
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8).
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
Please read cautions and warnings and
important notes at the end of this document.
3
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs TX - ANT
Absolute attenuation
10.0
... 420.0
420.0
... 494.0
494.0
... 701.0
701.0
... 728.0
728.0
... 764.0
764.0
... 804.0
860.0
... 864.0
864.0
... 869.0
869.0
... 894.0
@fCarrier 871.4
... 891.6
1565.420 ... 1573.374
1573.374 ... 1577.466
1577.466 ... 1585.420
1597.5515 ... 1605.886
1648.0
... 1698.0
1844.9
... 1879.9
1884.5
... 1919.6
1930.0
... 1990.0
2110.0
... 2170.0
2400.0
... 2547.0
3296.0
... 3396.0
4120.0
... 4245.0
4900.0
... 5943.0
1)
min.
typ.
@ 25 ˚C
max.
30
32
30
30
33
30
3
20
44
44
36
36
36
35
25
30
30
29
27
20
22
21
8
39
37
34
34
36
35
9
46
50
50
39
39
39
38
36
33
33
32
30
23
25
24
13
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
α
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz αWCDMA1)
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8).
Please read cautions and warnings and
important notes at the end of this document.
4
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs ANT - RX
Center frequency
fC
—
typ.
@ 25 ˚C
881.5
Maximum insertion attenuation
869.0 ... 894.0 MHz
@fCarrier 871.4 ... 891.6 MHz
αmax
αWCDMA1)
—
—
1.7
1.5
2.1
1.8
dB
Amplitude ripple (p-p)
869.0 ... 894.0 MHz
@fCarrier 871.4 ... 891.6 MHz
∆α
αWCDMA1)
—
—
0.5
0.3
1.0
0.8
dB
dB
—
0.5
0.8
dB
—
2.7
4.0
%
—
1.5
2.0
—
1.5
2.0
—
—
—
—
-125
-112
-108
-115
-109
-100
- 97
-104
Amplitude ripple over any 5MHz
channel
869.0 ... 894.0 MHz
Error Vector Magnitude
@fCarrier 871.4 ... 891.6 MHz
min.
EVM2)
IMD product level limits3)
at fTX=836.5MHz, fRX=881.5MHz
Blocker 1
45.0 MHz
Blocker 2
791.5 MHz
Blocker 3
1718.0 MHz
Blocker 4
2554.5 MHz
2)
3)
—
MHz
∆α
Input VSWR (ANT port)
869.0 ... 894.0 MHz
Output VSWR (RX port)
869.0 ... 894.0 MHz
1)
max.
dBm
dBm
dBm
dBm
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8).
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
IMD product level limits for power levels PTX=21.5 dBm (antenna port output power) and
PBlocker=-15dBm (antenna port input power).
Please read cautions and warnings and
important notes at the end of this document.
5
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs ANT - RX
Attenuation
10.0
824.0
@fCarrier 826.4
849.0
909.0
920.0
979.0
1710.0
1785.0
4500.0
5000.0
1)
...
824.0
45.0
... 849.0
... 846.6
... 854.0
... 920.0
... 979.0
... 1710.0
... 1785.0
... 4500.0
... 5000.0
... 6000.0
α
MHz
MHz
MHz
MHz αWCDMA1)
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
min.
typ.
@ 25 ˚C
max.
40
50
45
51
30
7
25
40
50
40
35
35
62
56
53
58
50
18
29
53
56
49
42
39
—
—
—
—
—
—
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8).
Please read cautions and warnings and
important notes at the end of this document.
6
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs TX - RX
min.
typ.
@ 25 ˚C
max.
αWCDMA1)
51
55
54
59
αWCDMA1)
50
50
54
55
40
20
20
55
57
50
—
—
—
—
—
—
—
α
Isolation
824.0 ... 849.0 MHz
@fCarrier 826.4 ... 846.6 MHz
869.0 ... 894.0 MHz
@fCarrier 871.4 ... 891.6 MHz
1574.0 ... 1577.0 MHz
1638.0 ... 1708.0 MHz
2462.0 ... 2557.0 MHz
1)
dB
dB
dB
dB
dB
dB
dB
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8).
Please read cautions and warnings and
important notes at the end of this document.
7
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by
∞
∫∞ Sds 21 ( f )HRRC ( f – f Carrier )
2
df
fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 5-Passband, fCarrier ranges from
826.4 MHz (lowest TX channel) to 846.6 MHz (highest TX channel)). HRRC(f) is the transfer
function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101
with the following normalization:
∞
∫∞ HRRC ( f )
2
df = 1
Maximum ratings
Storage temperature range
DC voltage
ESD voltage
Input power
824.0 ... 849.0 MHz
elsewhere
1)
2)
3)
Tstg
VDC
VESD
PIN
–40/+851) ˚C
52)
V
3)
100
V
28
10
dBm
dBm
Machine Model
source and load impedance 50 Ω
continuous wave
T = 50˚C, 3,000 h
}
extended upperlimit: 168h@125˚C acc. to IEC 60068-2-2 Bb
168h Damp Heat Steady State acc. to IEC 60068-2-67 Cy
acc. to JESD22-A115B (MM - Machine Model), 10 negative and 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
8
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Frequency Response TX-ANT (Power transfer function)
Frequency Response TX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
9
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Frequency Response RX-ANT (Power transfer function)
Frequency Response RX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
10
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Frequency Response TX-RX (Power transfer function)
Frequency Response TX-RX (wideband)
Please read cautions and warnings and
important notes at the end of this document.
11
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
Return Loss
S11 TX- port
S22 ANT-port
Please read cautions and warnings and
important notes at the end of this document.
12
S33 RX-port
Apr 25, 2013
SAW Components
B8608
SAW Duplexer
836.5 / 881.5 MHz
Preliminary datasheet
References
Type
B8608
Ordering code
B39881B8608P810
Marking and package
C61157-A8-A68
Packaging
F61074-V8259-Z000
Date codes
L_1126
S-parameters
B8608_NB_UN.s3p, B8608_WB_UN.s3p
see file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2013. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
13
Apr 25, 2013
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
14
Apr 25, 2013