SAW Components BAW Duplexer WCDMA Band II Series/type: Ordering code: B7692 B39202B7692A710 Date: Version: December 11, 2008 2.0 EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet Application ■ Low-loss BAW duplexer for mobile telephone WCDMA Band II systems ■ Low insertion attenuation ■ Low amplitude ripple ■ Usable passband 60 MHz Features 1 4 0.4 5 6 1.1 0.5 bottom view 7 1.05 (SMT) ■ Ni, gold-plated terminals ■ Fully matched by integrated matching network ■ Electrostatic Sensitive Device (ESD) 3 9 8 max. height 1.15 mm ■ RoHS compatible ■ Package for Surface Mount Technology 2 0.6 0.5 0.65 ■ Package size 3.0 x 2.5 mm2, side view 2.5 3.0 top view Pin configuration ■ ■ ■ ■ ■ 3 1 6 7, 8, 9 2, 4, 5 1 TX Input RX Output Antenna To be grounded To be grounded 3 7,8,9 2,4,5 6 Please read cautions and warnings and important notes at the end of this document. 2 December 11, 2008 SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT = 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characteristics TX - ANT min. typ. @ 25˚C 1880.0 max. - 2.2 3.02) dB 2.2 3.23) dB Amplitude ripple (p-p) @fCarrier 1852.4 ... 1907.6 MHz αWCDMA1) - 1.0 2.0 dB Error Vector Magnitude @fCarrier 1852.4 ... 1907.6 MHz EVM4) - 1.2 3.8 % Input VSWR (TX port) 1850.0 ... 1910.0 MHz - 1.7 2.12) ... 1910.0 MHz - 1.7 2.23) Output VSWR (ANT port) 1850.0 ... 1910.0MHz - 1.8 2.2 30 36 10 45 20 20 14 5 34 41 22 55 38 28 20 8 - Center frequency fC Maximum insertion attenuation @fCarrier 1852.4 ... 1907.6 MHz αWCDMA1) @fCarrier 1852.4 1850.0 ... 1907.6 MHz αWCDMA 50.0 1574.4 1770.0 @fCarrier 1932.4 ... ... ... ... α 1574.0 MHz 1576.5 MHz 1830.0 MHz 1987.6 MHz αWCDMA1) 2110.0 2400.0 3700.0 3820.0 ... ... ... ... 2155.0 MHz 2500.0 MHz 3820.0 MHz 6000.0 MHz Attenuation 1) 2) 3) 4) 1) MHz dB dB dB dB dB dB dB dB Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6). -10 to +55 ˚C +55 to +85 ˚C Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. Please read cautions and warnings and important notes at the end of this document. 3 December 11, 2008 SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet Characteristics Temperature range for specification: ANT terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT = 50 Ω ZRX = 50 Ω ZTX = 50 Ω Characteristics ANT- RX min. Center frequency fC typ. @ 25˚C 1960.0 max. MHz Maximum insertion attenuation @fCarrier 1932.4 ... 1987.6 MHz αWCDMA1) - 2.6 3.5 dB Amplitude ripple (p-p) @fCarrier 1932.4 ... 1987.6 MHz αWCDMA1) - 1.3 2.0 dB Error Vector Magnitude @fCarrier 1932.4 ... 1987.6 MHz EVM2) - 2.0 3.83) % - 2.0 6.04) % - 1.8 2.2 30 38 48 15 35 30 15 1.8 2.2 35 44 55 40 48 50 40 - @fCarrier 1932.4 ... 1987.6 MHz EVM2) Input VSWR (ANT port) 1930.0 ... 1990.0 MHz Output VSWR (RX port) 1930.0 ... 1990.0 MHz Attenuation 0.3 1770.0 @fCarrier 1852.4 2075.0 2400.0 3860.0 5620.0 1) 2) 3) 4) α ... 1770.0 MHz ... 1850.0 MHz ... 1907.6 MHz αWCDMA1) ... ... ... ... 2400.0 MHz 2500.0 MHz 3980.0 MHz 5820.0 MHz dB dB dB dB dB dB dB Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6). Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. +10 ˚C to +85 ˚C. -10 ˚C to +10 ˚C. Please read cautions and warnings and important notes at the end of this document. 4 December 11, 2008 SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet Characteristics Temperature range for specification: Antenna terminating impedance: RX terminating impedance: TX terminating impedance: T = –10 ˚C to +85 ˚C ZANT = 50 Ω ZRX = 50 Ω ZTX = 50 Ω IMD Product Level Limits at Rx frequencies and at Rx port1) (1930 ... 1990 MHz): Blocker 1 80.0MHz Blocker 2 1770.0 ... 1830.0MHz Blocker 3 3840.0MHz 1) typ. @ 25˚C max. - -112 -110 -86 - dBm dBm dBm IMD product level limits for power levels PTX= 21dBm (antenna port output power) and PBlocker= -15dBm (antenna port input power). Characteristics TX - RX Isolation @fCarrier 1852.4 @fCarrier 1932.4 1) min. α ... 1907.6 MHz αWCDMA1) ... 1987.6 MHz αWCDMA1) min. typ. @ 25 ˚C max. 50 54 - dB 48 54 - dB Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6). Please read cautions and warnings and important notes at the end of this document. 5 December 11, 2008 SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet Maximum ratings Temperature range for specification Operable temperature range1) Storage temperature range DC voltage ESD voltage Input power at 1850.0 ... 1910.0 MHz T –10/+85 ˚C T Tstg VDC VESD PIN –30/+85 –40/+85 3 1002) ˚C ˚C V V elsewhere 30 dBm machine model, 10 pulses source and load impedance 50 Ω continuous wave 10 dBm T = 55˚C, 50.000 h } 1) Defines the temperature range in which the BAW device keeps its typical characteristics, however the specification values are not guaranteed. 2) acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses. Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for UMTS-Passband, fCarrier ranges from 882.4 MHz (lowest Tx channel) to 912.6 MHz (highest Tx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫∞ HRRC ( f ) Please read cautions and warnings and important notes at the end of this document. 6 2 df = 1 December 11, 2008 SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet Frequency Response TX-ANT (PTF) Frequency Response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 7 December 11, 2008 SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet Frequency Response ANT-RX (PTF) Frequency Response ANT-RX (wideband) Please read cautions and warnings and important notes at the end of this document. 8 December 11, 2008 SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet Frequency Response TX-RX (PTF) Please read cautions and warnings and important notes at the end of this document. 9 December 11, 2008 SAW Components B7692 1880.0 / 1960.0 MHz BAW Duplexer Data Sheet References Type B7692 Ordering code B39202B7692A710 Marking and package C61157-A3-A47 Packaging F6107-V8211-Z000 Date codes L_1126 B7692_NB.s3p S-parameters B7692_WB.s3p See file header for pin/port assignment Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2008. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 10 December 11, 2008 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 11 December 11, 2008