ALPW-BLEM003 Bluetooth® Smart module Description The ALPW-BLEM003 module is a complete ready-to-use Bluetooth® Smart module. The ALPW-BLEM003 module combines ultra low power components and a complete Bluetooth® Smart protocol stack. hardware Alpwise solutions benefit from best-in-class product from wireless leading semiconductor manufacturers. Main Features Small form factor Ultra low power consumption EM9301 2,4 GHz Bluetooth® Smart controller 1AA battery or button cell battery supply Complete connectivity Digital and analog comparator Programmable Cortex M0 processor to handle Bluetooth® Smart user application + Bluetooth® Smart stack Qualified Bluetooth® Smart protocol stack with GAP, SMP, ATT, L2CAP and GATT protocols Contact User Applications The ALPW-BLEM003 facilitates the integration of cost-effective and low power consumption wireless technologies for the following application segments, thanks to a continously updated and qualified list of profiles: Alpwise Headquarter 4 avenue Doyen Louis Weil 38000 Grenoble, France T: +33 4 76 22 22 50 F: +33 4 76 22 15 64 [email protected] www.alpwise.com Alpwise Worldwide You can buy our products through our International distributors. You will find the distributors details on our website on the contact page. Follow us on : Technical Data Microprocessor STM32 ARM Cortex M0 GPIOs Up to 10 Bluetooth® controller Module Dimensions (mm) Connectivity 1 USART, 1 I2C Analog Interfaces Frequency Range TX Output Power RX Sensitivity EM9301 12 x 19 x 2.4 with shielding 12 x 19 x 1.6 without shielding 2.4 GHz -18 dBm to +3 dBm -80 dBm 4 ADC 10 bit with VREF CE, IC, FCC, MIC, BT Pending UFL antenna, shielding Operating Temperature Power Supply -40°C to +85°C 2.0 to 3.3 V Certifications Options Dimensions Module Pin-Out PAD1 GND PAD23 SWD_DAT PAD2 NC PAD24 I2C_SMBA PAD3 ADC4 PAD25 GND PAD4 ADC3 PAD26 GND PAD5 USART_RTS PAD27 VDDA PAD6 PAD28 ADC1 PAD7 USART_CL K USART_CTS PAD29 SWD_CLK PAD8 VDD 3.3V PAD30 IO2 PAD9 GND PAD31 NC PAD10 NC PAD32 NC PAD11 USART_TX PAD33 I2C_SCL PAD12 NC PAD34 I2C_SDA PAD13 NC PAD35 ADC2 PAD14 GND PAD36 IO1 PAD15 BOOT PAD37 MCU NRST PAD16 USART_RX PAD38 NC PAD17 NC PAD39 NC PAD18 NC PAD40 GND PAD19 NC PAD41 GND PAD20 NC PAD42 RF OUTPUT PAD21 GND PAD43 GND PAD22 GND Flexible System Configuration The ALPW-BLEM003 module enables wide use in different design configuration: Stand Alone module - ready-to-use Bluetooth® Smart co-processor, packed with GAP and GATT profile. Additional profile can be added upon the specific use. Application module - user application program can be downloaded into the internal Flash memory to take benefit of the internal MCU power and interface offer (GPIO’s, ADC…). Protocol stack is provided through the ALPW-BLESDKCM0 SDK. You may also be interested in these products Along with the ALPW-BLEM003 module, Alpwise provides all the tools facilitating the implementation of your Bluetooth® low energy application: development kit, SDK, SDK for iOS ALPW-BLEEASY ALPW-BLESDK Easy Kit ALPW-BLESDKiOS Protocol Stack and tools Stack for iOS Please contact us to know more about our complete offer. The Bluetooth® word mark and logos are registred trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Alpwise is under license. Other trademarks and trade name are those of their respective owners. copyright © 2013 Alpwise