New Product Small and power-saving module equipped with an antenna. Acquired radio law certification in each country. Bluetooth® Low Energy Module Application / Market Collection of the sensor information such as temperature/humidity, control of HVAC equipment (heater, ventilation and air conditioner), acquisition of positional information, and control or transfer of data of healthcare equipment WML-C75 Specification Item Specifications Bluetooth® specification UART, SPI, I2C, GPIO, AIO Interface Frequency Features Interval of RF channels Number of RF channels 1. Bluetooth® 4.0 (single mode) specifications compliant Bit rate 2. TELEC certified (FCC, CE certification be acquired) Transmission output End Product certified in Bluetooth® SIG certifications Reception sensitivity 3. We can supply product sample into which healthcare profile of Bluetooth® SIG is integrated Power supply voltage Current consumption 4. Mitsumi's original general-purpose profile ※ mountable ※ Up to 20 bytes of bi-directional communication Operating temperature range Dimensions Connection Outline Conforming to Bluetooth® Core Spec. Ver4.0 Low Energy (Single Mode) specification 2402 – 2480MHz (World Wide) 2MHz 40ch 1Mbps 0dBm － 84dBm 1.8V – 3.6V Transmission: 15mA, Reception: 17mA, Sleep: 0.6 μ A － 30 – ＋ 85℃ 19.0 （ W） ×13.0 （ D） ×2.3 （ H） mm SMD type(Side Through Hole) * Specifications subject to change without notice for improvements. This product is a small-sized and power-saving Bluetooth® 4.0 single mode module. It is equipped with an antenna, and has gained TELEC certification (FCC and CE certifications also). It can install various types of profiles Block Diagram Dimensions Marketing Section RF Module Business Department Automotive Devices Business Division tel : +81-42-310-5531 All brand names, logos, product names, trade names and service names described here are trademarks or registered trademarks of their respective companies or organizations. Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification. The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications. Printed in Japan 1409F02 ① 16_WML-C75_e.indd 1 14/09/27 0:33