SHIELDED COMMON MODE CHOKE Dimensions in inches (mm) How to order code 555 - 8005 - XX - 01 - 36 Packaging Inductance Code Basic Part No. INDUCTANCE & TOLERANCE TEST FREQUENCY (KHz) DCR Max (W) per winding CURRENT Max (mA) 0.03mH +/-30% 100 0.07 100 -02 0.11mH +/-30% 100 0.13 100 -03 0.44mH +/-30% 100 0.26 100 -04 1.75mH +/-30% 100 0.53 100 -05 2.73mH +/-30% 100 0.65 100 -06 3.92mH +/-30% 100 0.78 100 -07 6.98mH +/-30% 100 1.05 100 -08 10.90mH +/-30% 100 1.31 100 Basic Part No. -01 555-8005 Notes 80 Core material Ferrite Inductance Measured at 100KHz, 30mV (reading taken at 25˚C ±5˚C) Terminations Gold over Nickel underplate and meet the requirements of J-STD-001 and IPC-A-610 Weight 1.0g (typical) Operating temperature -51˚C to +85˚C Storage temperature -51˚C to +105˚C Resistance to soldering heat Maximum of three 20 second reflows at +260˚C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MAS) 1 (unlimited floor life at <35˚C / 85% relative humidity) Packaging 500pcs per 13” (330mm) reel. Anti-static 24mm carrier tape PCB washing Pure water or alcohol recommended – others to be evaluated by customer Compliance RoHS Call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com