TIP & RING FILTERS Tip and Ring Filters for Critical Applications These surface mount tip and ring filters provide substantial reduction of noise throughout an extended frequency range. 515FRF3531 515FRF3532 1 4 8 5 1 2 3 4 8 7 6 5 0.307 ±0.008 7,80 ±0,20 0.138 ±0.006 3,50 ±0,15 0.007 / 0,18 0.317 ±0.012 8,05 ±0,30 Notch indicates pin 1 * * 0.236 6,00 0.012 0,305 5 4 Part number1 Lines Minimum inductance: (each winding @130 kHz) Rated current: DCR each winding: Dielectric strength: 0.217 ±0.008 5,50 ±0,20 ST515FRF3531LZST515FRF3532LZ 12 35 µH 35 µH 1 0.098 2,50 500 mA 500 mA 0.075 q max 0.135 q max 1500 Vrms 1500 Vrms (1–8)(1,2–7,8) ® 0.050 cen 1,27 Suggested Recommended Land Pattern 4 1 8 0.200 5,08 0.060 1,52 Attenuation (dB) re: 50 Ohms Typical Response** -10 Differential Mode 0 10 Co mm on 20 Mo de 30 40 0.1 1 10 100 1000 Frequency (MHz) **Measured on Agilent/HP 8753D network analyzer. Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 5 0.030 0,76 Core material Ferrite Terminations RoHS compliant tin-silver-copper over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 214 – 216 mg Ambient temperature –40°C to +85°C Storage temperature Component: –55°C to +85°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 250/7″reel; Plastic tape: 16 mm wide, 0.35 mm thick, 8 mm pocket spacing, 4.4 mm pocket depth PCB washing Only pure water or alcohol recommended 0.050cen 1,27 8 * Dimensions are typical prior to applying solder 1. When ordering, please specify termination code: ST515FRF3531LZ Termination:L=RoHS compliant tin-silver-copper over tin over nickel over phos bronze Special order: S = non-RoHS tin-lead (63/37). 2. Operating temperature range –40°C to +85°C. 3. Electrical specifications at 25°C. 0.0395 1,00 0.020 0,50 Phone 800-981-0363 Fax 847-639-1508 Document ST492 Revised 02/14/12 E-mail [email protected] Web www.coilcraft-cps.com