INDEX Series A2000, LP2000 & CB2000 Single Row Terminal Blocks A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: .375” or 3/8” (9.52 mm) LP202110 Wire Size: #12-22 AWG CU Screw Size: #6-32 zinc plated philslot Torque Rating: 9 in-lb. max. Base: Standoffs standard for easy flux washing Distance Between Barriers: .32” (8.1 mm) Recommended PCB Hole Diameter: .076” (1.93 mm); .062” (1.59 mm) on .045” terminals. Operating Temperature: 105°F (221°F) max., -40°C (-40°F) min. Molded Material: Black, UL Rated 94VO Thermoplastic Breakdown Voltage: 3400V rms (A2 & LP2); 4100V rms (CB2). Approvals: UL E62622; CSA LR15364; IEC Compliance; A2000 & LP2000 Series CE Certified CB20210507 .375 (9.53) Poles MOUNTING ENDS ONLY A C Mount Ctrs. Length BARRIER & MOUNTING ENDS B Pole Ctrs. BARRIER ENDS ONLY C Length .15 (3.8) dia. .65 (16.5) C Mount End 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1.13 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 6.38 6.75 7.13 7.50 7.88 8.25 8.63 9.00 9.38 9.75 10.13 10.50 10.88 11.25 11.63 1.56 1.93 2.30 2.68 3.06 3.43 3.81 4.18 4.56 4.93 5.31 5.69 6.06 6.43 6.81 7.18 7.56 7.93 8.31 8.68 9.06 9.43 9.81 10.18 10.56 10.93 11.31 11.68 12.05 .38 .75 1.13 1.50 1.88 2.25 2.63 3.00 3.38 3.75 4.13 4.50 4.88 5.25 5.63 6.00 6.38 6.75 7.13 7.50 7.88 8.25 8.63 9.00 9.38 9.75 10.13 10.50 10.88 11.25 11.63 .81 1.18 1.56 1.93 2.31 2.68 3.06 3.43 3.81 4.18 4.56 4.93 5.31 5.68 6.06 6.43 6.81 7.18 7.56 7.93 8.31 8.68 9.06 9.43 9.81 10.18 10.55 10.93 11.31 11.68 12.05 Barrier End .76 (19.3) .565 (14.35) on LP2000 .40 (10.2) .02 (.5) A Mount Centers B Pole Centers Mount End Barrier End CB2000 Series .375 (9.53) .19 (4.8) dia. .32 (8.1) .70 (17.8) C Mount End Barrier End .60 (15.2) * Dimensions in inches. To convert to millimeters, multiply by 25.4. .02 (.5) A Mount Centers B Pole Centers Mount End Barrier End Cooper Bussmann l 7300 W. Wilson Ave l Chicago, IL 60656-4708 l Fax: 708-867-2211 l Phone: 708-867-4600 Website: http://www.busscc.com 7 INDEX Series A2000 & LP2000 Single Row Terminal Blocks Part Numbering System Series Terminal Style A n 2 n L n P n 2 n Base/End Poles Screw Options Options nn nnnn nnn (Views pg. 9) nn A2 - standard barrier 01 - handwired LP2 - low profile 02 - printed circuit barrier 03 - non feed-thru 04 - wire wrap tail 05 - extended handwired 06 - handwired 07 - extended pin 08 - printed circuit 09 - .250 QC w/o insulated base 10 - .187 QC 14 - printed circuit 19 - .250 QC with insulated base n 0 - flat base/molded 02 to 32 mount end 02 to 30 on mount 1 - flat base/mnt. end end base 2 - flat base/barrier end 3 - insulator base/mnt. end 4 - insulator base/ barrier end 5 - closed base/ mount end 6 - closed base/ molded mount end 9 - insulator base/ molded mount end Base/End Note: 0, 6, 9 styles not available with covers. 3, 4, 9 Styles not available with 02, 03, 06, 08, 09 & 14 terminals. 5 & 6 Styles only available with 03 terminals. Blank - std. screw AB - angle mnt. options (pg 10) 00 - screws shipped bulk A1 to A9 - .250” QC 03 - stainless steel B1 to B9 - .187” QC 04 - brass nickel plated DR - drilled right angle (pg 10) 07 - steel SEMS JA, JB & JC - barrier jumpers (not available L1 to L6 marking options (pg 23) with hardware options) MP, MP8 & MT mounting plates (pg 10) 09 - brass SEMS OJ2 & OJ4 - over barrier jumpers (not nickel plated available w/covers) (not available with RC - retaining clips (pg 10) hardware options) R30 to R77 - right angle bends (pg 10) CA - captive screw SO - stand off insulators (pg 10) 03CA - stainless steel captive S1 - solder lug/flat 04CA - brass captive 07CA - SEMS captive 09CA - brass SEMS captive 07WR - steel SEMS wire ready (not available on LP2) Terminal Styles Inches (Millimeters) .20 .55 (14.0) .031 (.79) (5.1) .55 (14.0) .062 (1.57) 01 Handwired 02 Circuit Board 03 Non Feed-Thru .110 (2.79) .031 (.79) 05 Extended Handwired (7.6) 04 Wire Wrap Tail .82 (20.8) .30 .66 (16.8) .031 (.79) .062 (1.57) .031 (.79) .110 (2.79) .031 (.79) .11 (2.79) .031 (.79) .062 (1.57 ) 08 Circuit Board 07 Extended Pin 06 Handwired .33 (8.4) .40 (10.2) .031 (.79) .42 (10.7) .250 (6.35) 09 .250 QC w/o insulated base 8 .125 .187 (4.75) .031 (.79) 10 .187 QC .031 (.79) (3.2) .062 (1.57) .72 (18.3) .42 (10.7) .031 (.79) 14 Circuit Board .30 (7.6) 19 .250 QC with insulated base Cooper Bussmann l 7300 W. Wilson Ave l Chicago, IL 60656-4708 l Fax: 708-867-2211 l Phone: 708-867-4600 Website: http://www.busscc.com .250 (6.35) INDEX Screw Options Standard Zinc Plated Steel Hardware Options Solder Lugs 04 Brass Nickel Plated 03 Stainless Steel 07 Steel SEMS 09 Brass SEMS Nickel Plated Inches (Millimeters) (Bulk ordering part numbers are in parentheses.) Jumpers 07WR Wire Ready (A2 only) Quick Connects Blade Width A = .250” Blade Width B = .187” .68 (17.3) .33 (8.4) .84 (21.2) S1 (2S1) JA (JA2-XX) OJ2 A1 & B1 (2A1 & 2B1) A2 & B2 (2A2 & 2B2) A3 & B3 (2A3 & 2B3) OJ4 A4 & B4 (2A4 & 2B4) A5 & B5 (2A5 & 2B5) A6 & B6 (2A6 & 2B6) A7 & B7 (2A7 & 2B7) A8 & B8 (2A8 & 2B8) A9 & B9 (2A9 & 2B9) .33 (8.4) JB (JB2-XX) .33 (8.4) JC (JC2-XX) B Base/End Options B B B .180 (4.57) .150 dia. (3.8) mounting holes (2) .218 (5.54) .40 (10.2) .40 (10.2) .095 (2.4) SECTION A–A 0, 6 & 9 Mount Ends SECTION B–B 1, 3 & 5 Mount Ends Cooper Bussmann l 7300 W. Wilson Ave l Chicago, IL 60656-4708 l Fax: 708-867-2211 l Phone: 708-867-4600 Website: http://www.busscc.com 9 INDEX Series A2000 & LP2000 Single Row Terminal Blocks Continued Mounting Options Right Angle Bends (A2, LP2 only) Right angle terminals are offered on the A2000 & LP2000 Series. Configurations are defined in these dimensions: X = pin extension beyond the block base; Z = length from block base to centerline of the terminal tip. Standard bends consist of the X and Z dimensions shown in the chart. Specify by adding the selected Bend Option Code to the terminal part no. 07 Terminal Bend Configurations 04 Terminal Bend Configurations Z .82 X Z .55 X Bend Option Code X (minimum) Z Available w/insulator base R30 R35 R36 R39 R42 R46 R48 R50 -.04 .01 .02 .05 .08 .12 .14 .16 .28 .23 .22 .19 .16 .12 .10 .08 No No No No No No No No Bend Option Code X (minimum) Z Available w/insulator base R30 R35 R36 R42 R46 R50 R53 R66 R69 R75 R77 -.04 .01 .02 .08 .12 .16 .19 .32 .35 .41 .43 .55 .50 .49 .43 .39 .35 .32 .19 .16 .10 .08 Yes Yes Yes Yes Yes No No No No No No Dimensions in inches. To convert to millimeters, multiply by 25.4. Angle Brackets (A2, LP2 only) Drilled Right Angle (A2, LP2 only) .24 .375 .25 .04 .45 .144 HOLE w/.312 C' BORE .32 .15 Option AB Angle brackets enable block to be fastened at right angles to normal mount position. Bulk part no. 2AB. Standoffs Mounting Plates MOUNTING PLATE Option DR Counterbored holes across mount ends of block enable fastening with two screws at right angles to normal mount position. Retaining Clip MP MP8 .300 MT RETAINING CLIP STANDOFF Options MP, MP8 & MT MP Metal inserts with .150” dia. hole accept #6 screw. MP8 Metal inserts with .187” dia. hole accept #8-32 screw. MT Metal inserts with tapped hole accept #6-32 screw. 10 Option SO Standoff mounts are tubes molded to the mounting positions. Available with insulator bases only. Option RC Use on standoff tubes. Fit panels up to .125” thick. Two clips for every five positions. Supplied unassembled. Bulk Part No. H541. Cooper Bussmann l 7300 W. Wilson Ave l Chicago, IL 60656-4708 l Fax: 708-867-2211 l Phone: 708-867-4600 Website: http://www.busscc.com