DR124 Series Low Profile Power Inductors Description RoHS 2002/95/EC • 125°C maximum total temperature operation • Low profile surface mount inductor • 12.3mm x 12.3mm x 4.5mm shielded drum core • Ferrite core material • Inductance range from 0.47µH to 1000µH • Current range from 24.4 Amps to 0.44 Amps • Frequency range up to 1MHz Applications • Notebook power, LCD panels • Computer, DVD players, and portable power devices • DC-DC converters • Buck, boost, forward, and resonant converters • Noise filtering and filter chokes Environmental Data • Storage temperature range: -40°C to +125°C • Operating temperature range: -40°C to +125°C (range is application specific) • Solder reflow temperature: +260°C max. for 10 seconds maximum Part Number DR124-R47-R DR124-1R0-R DR124-1R5-R DR124-2R2-R DR124-3R9-R DR124-4R7-R DR124-6R8-R DR124-8R2-R DR124-100-R DR124-120-R DR124-150-R DR124-180-R DR124-220-R DR124-270-R DR124-330-R DR124-390-R DR124-470-R DR124-560-R DR124-680-R DR124-820-R DR124-101-R DR124-121-R DR124-151-R DR124-181-R DR124-221-R DR124-271-R DR124-331-R DR124-471-R DR124-681-R DR124-821-R DR124-102-R Rated Inductance (µH) 0.47 1.0 1.5 2.2 3.9 4.7 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 470 680 820 1000 Packaging • Supplied in tape and reel packaging, 750 per reel OCL (1) µH±20% Irms(2) Amperes Isat (3) Amperes 0.42 0.83 1.37 2.04 3.80 4.88 6.10 7.45 8.94 11.5 14.2 16.2 20.7 25.7 31.2 37.3 44.0 54.9 67.1 80.5 95.1 111 146 179 216 256 327 460 669 825 998 16.0 13.9 11.1 9.1 7.0 6.5 5.6 5.2 4.5 4.1 3.6 3.4 3.2 2.8 2.6 2.3 2.2 2.0 1.8 1.7 1.5 1.3 1.3 1.1 1.0 0.88 0.83 0.68 0.56 0.53 0.44 24.40 18.00 14.00 11.45 8.40 7.65 6.47 6.22 5.80 4.96 4.62 4.32 3.83 3.44 3.12 2.85 2.63 2.35 2.13 1.94 1.79 1.65 1.44 1.30 1.15 1.09 0.92 0.74 0.65 0.62 0.53 (1) Open Circuit Inductance Test Parameters: 100kHz, 0.25V, 0.0Adc. (2) Irms: DC current for an approximate ∆T of 40°C without core loss. Derating is necessary for AC currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed 125°C under worst case operating conditions verified in the end application. (3) Isat Amperes peak for approximately 25% rolloff (@25°C) DCR (Ω) mΩ @20°C (Typical) 2.2 3.00 4.75 5.92 12.50 13.50 18.06 21.67 23.33 31.67 37.30 46.97 53.99 66.67 80.83 110.00 124.66 144.32 183.33 212.72 256.67 311.18 371.02 501.66 558.00 725.00 825.00 1242.50 1845.83 2109.17 2898.00 DCR (Ω) mΩ @20°C (Maximum) 2.7 3.6 5.7 7.1 15.0 16.2 21.7 26.0 28.0 38.0 44.8 56.4 64.8 80.0 97.0 132.0 149.6 173.2 220.0 255.3 308.0 373.4 445.2 602.0 669.6 870.0 990.0 1491.0 2215.0 2351.0 3477.00 K-factor (4) 17.51 12.50 9.73 7.96 5.84 5.15 4.61 4.17 3.81 3.50 3.02 2.82 2.50 2.24 2.04 1.86 1.72 1.54 1.39 1.27 1.17 1.08 0.94 0.87 0.77 0.71 0.63 0.53 0.45 0.40 0.37 (4) K-factor: Used to determine B p-p for core loss (see graph). B p-p = K*L*∆I, B p-p(mT), K: (K factor from table), L: (Inductance in µH), ∆I (Peak to peak ripple current in Amps). (5) Part Number Definition: DR124-xxx-R DR124 = Product code and size; -xxx = Inductance value in uH; R = decimal point; If no R is present, third character = # of zeros. -R suffix = RoHS compliant DR124 Series Low Profile Power Inductors Mechanical Diagrams 2.05 Typ. BOTTOM VIEW FRONT VIEW SCHEMATIC RECOMMENDED PCB LAYOUT TOP VIEW 12.9 5.00 1 Typ 2 4.5 Max 12.30 Max 1 2 12.30 Max DR124-### wwllyy R 1 5.50 2 10 2.65 Dimensions are in millimeters. wwlly = Date code, R = Revision level. Packaging Information 1.5 dia +0.1/-0.0 1.5 dia min A 1.75 4.0 11 12.6 Bo B1 DR124-### wwllyy R A1 Ao Ko SECTION A-A 16.0 Ao=13.2 mm Bo=13.2 mm A1=10mm B1=10 mm Ko=5.2 mm 24.0 A User direction of feed Parts packaged on 13" Diameter reel, 750 parts per reel. Core Loss 100 500kHz 1MHz 10 100kHz 1 Core Loss (W) 300kHz 200kHz 0.1 0.01 0.001 0.0001 1 10 100 Bp-p (m T) 1000 DR124 Series Low Profile Power Inductors Temperature Rise vs. Loss 120 Temperature Rise (ºC) 100 80 60 40 20 0 0 0.4 0.8 1.2 1.6 2 Total Pow er Loss (W) Inductance Characteristics OCL Vs. Isat 120.0% 100.0% % OCL 80.0% 60.0% 40.0% 20.0% 0.0% 0.0% +85 Deg. C +25 Deg. C - 40 Deg. C 20.0% 40.0% 60.0% 80.0% 100.0% 120.0% % Isat PM-4141 3/07 © Cooper Electronic Technologies 2007 Visit us on the Web at www.cooperbussmann.com 1225 Broken Sound Pkwy. Suite F Boca Raton, FL 33487 Tel: +1-561-998-4100 Toll Free: +1-888-414-2645 Fax: +1-561-241-6640 This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.