Technical Data 10240 Effective February 2015 Supersedes April 2014 BUSSMANN SERIES Bussmann series NH Vertical fuse rails - EBF range Product description Eaton’s Bussmann series NH vertical fuse rails are specifically designed to be used with NH fuse links. All energized metal parts are fully protected against accidental contact. They are intended for direct installation on horizontal or vertical busbar systems. Standard features • Possible installation of various earthing devices • Various options for cable terminations • Wide range of accessories Technical Data 10240 Effective February 2015 Catalogue Symbol: • EBF (see table 2 below) Standard/Approvals: • IEC 60269-1 • CE Compatible fuse links: • NH 400, 500 and 690 V NH gG and aM fuse links Technical data • Rated voltage: 690 V a.c. • Rated current: • 160 A size 00 • 400 A size 2 • 630 A size 3 Functionality • Designed for installation onto 185 mm busbar systems, sizes 00,1,2 and 3 • Fuse rail width: size 00 - 50 mm, size 2,3 - 100 mm • IP20 Touch protection • EBF 00/100 mm fuse rails are designed for installation onto 100 mm busbar systems. Installation onto 185 mm busbar system is possible by using an adaptor Operating conditions • Suitable for installation in environments free of any dust, explosive or aggressive gases. • Altitude up to 2000 metre above sea level • Can be used in outdoor environments if they are installed in IP34 cabinets • Relative air humidity should not be higher than 50% temperature of +40oC • Ambient temperature from -25oC to +55oC Features • Possible installation of various earthing devices • Various options for cable terminations • Wide range of accessories • Touch protection IP20 with fuse shrouds Packaging • 2 1 per carton. EATON www.eaton.com Bussmann series NH Vertical fuse rails - EBF range Bussmann series NH Vertical fuse rails - EBF range Technical Data 10240 Effective February 2015 Table 1. Technical data Type Size Rated thermal current Ith = In Voltage Un A V EBF 00 100 mm 00 EBF 00 185 mm 00 EBF 2 2 EBF3 3 160 690 160 690 400 690 630 690 Rated insulation voltage UI V 1000 1000 1000 1000 Rated frequency Hz 50 - 60 50 - 60 50 - 60 50 - 60 Rated power dissipation W Rated short-circuit withstand current kA Mechanical durability Number of cycles kg Weight IP Degree of protection IP Size of fuse links 12 12 45 60 100 100 100 100 100 100 100 100 0.75 2 4.5 5 00 00 201 201 00 00 2 3 1 With fuse links shrouds Table 2. Catalogue numbers Current Busbar Catalogue Size (Amps) system Numbers Vertical fuse rail for NH Size 00 EBF00230S8 100 mm* EBF00230V1 00 EBF00230V0 EBF00330S8 160 Cable Terminals Bridge terminals with bridge clamps (S) 4 - 70 mm2, screw terminals with M8 screws V-Terminals with V-Clamps 25 - 120 SW V Terminals without V-Clamps Bridge terminals with bridge clamps (S) 4 - 70 mm2, screw terminals with M8 screws V-Terminals with V-Clamps 25 - 120 SW EBF00330V1 V Terminals without V-Clamps EBF00330V0 Vertical fuse rail suitable for NH Size 1 and size 2 fuses V-Terminals with V-Clamps (35 - 240 mm2) EBF2330V1 185mm 2 400 185 mm EBF2330M1 EBF2330W1 Pack Quantity Screw terminals with pressed nuts M10 (M10 Screw) 2V-Terminals with double V-Clamps (2 x 50 - 240 mm2) Vertical fuse rail suitable for NH Size 3 fuses V-Terminals with V-Clamps (70 - 300 SW) EBF3330V1 Screw terminals with pressed nuts M12 (M12 Screw) 3 630 185 mm EBF3330M1 2V-Terminals with double V-Clamps (2 x 50 - 240 mm2) EBF3330W1 Compatible Fuse Links Weight Size 1 1 kg 1.1 kg 1 kg 1 2 kg 2.2 kg 2 kg 1 3.2 kg 3.1 kg 00 1 and 2 3.8 kg 1 4 kg 3.1 kg 3 4.8 kg EATON www.eaton.com 3 Technical Data 10240 Bussmann series NH Vertical fuse rails - EBF range Effective February 2015 Dimensions (mm) EBF 00 100 mm busbar system M8 S Screws V-Terminals EBF 00 185 mm busbar system M8 Screws 4 V-Terminals EATON www.eaton.com M8 Screws V-Terminals side view side view Technical Data 10240 Bussmann series NH Vertical fuse rails - EBF range Effective February 2015 Dimensions (mm) EBF 2 and 3 EBF 2 and 3 With terminals 2V (2 x 240 mm2) EBF 2 and 3 Changes to the products, to the information contained in this document, and to prices are reserved; so are errors and omissions. Only order confirmations and technical documentation by Eaton is binding. Photos and pictures also do not warrant a specific layout or functionality. Their use in whatever form is subject to prior approval by Eaton. The same applies to Trademarks (especially Eaton, Moeller, and Cutler-Hammer). The Terms and Conditions of Eaton apply, as referenced on Eaton Internet pages and Eaton order confirmations. Eaton Industries Manufacturing GmbH Electrical Sector EMEA Route de la Longeraie 71110 Morges, Switzerland Eaton.eu © 2015 Eaton All Rights Reserved Publication No. 10240 February 2015 Eaton is a registered trademark. All other trademarks are property of their respective owners.